The chemical method has proved to be the most effective mitigating method of wax deposition in petroleum system as it deals with the root cause of wax formation. Most of the commercial chemicals in the industry are very expensive and toxic. This paper aims the use of biodiesel based additives for improving the rheological behavior and pour points of waxy crude from Nigeria field. The biodiesels derived additives gave better performance than the commercial chemical and the seed oils as greatly improvement in rheology and pour point values of the waxy crude were observed 相似文献
This paper evaluates moisture content effects on CO2 capture of an ion-exchange resin (IER) functionalised with a primary amine group. IER capacities were determined by breakthrough with an inlet gas containing 10 vol% CO2, nitrogen and various moisture contents. Three types of behaviour were identified according to humidity level. In saturated air conditions, the stoichiometry could be justified by carbonates and bicarbonates fixation. In dry conditions, we suspect a joint physical adsorption and reaction mechanism. For intermediate humidity, the stoichiometry of 1 CO2 for 1 amine group is consistent with a bicarbonate fixation or carbamic acid formation. 相似文献
Cassava (Manihot esculenta Cranzt) deteriorates rapidly. Hence it is processed into various products within 2 to 3 days after harvesting. For this work, tapioca was produced from three different varieties of cassava. They are Odongbo, Okoiyawo and TMS30572. The sorption isotherm for the tapioca grits from three different varieties of cassava at temperatures 25, 32 and 45 °C were determined experimentally and modelled using five different models. Using analysis of variance at 0.01 level, it was shown that the experimental sorption isotherms of the tapioca from the various cassava varieties are not significantly different from each other. However, the Guggenheim (1966) , Anderson (1946) & de Boer (1953) (GAB) model gave the best fit for sorption isotherm of tapioca from either the Odongbo or Okoiyawo varieties, while the exponential model was the best for that from TMS30572 variety. 相似文献
Minimizing entropy generation is a technique that helps improve the effectiveness of real processes by studying the associated irreversibility of system performance of nanofluid. This study examines the entropy generation analysis of electromagnetohydrodynamic radiative Casson flow induced by a stretching Riga plate in a non-Darcian porous medium under the influence of internal energy change, Arrhenius activation energy, chemical reaction, and melting heat transfer. The thermophysical features of the fluid are assumed constant in most of the literature. However, this current research bridges this gap by considering viscosity, conductivity, and diffusivity as temperature-dependent variables. Also, the exponential decaying Grinberg term is used as a resistive force in this investigation due to the electromagnetic properties of the Riga plate in the momentum conservation equation. Some suitable dimensionless variables are introduced to remodel the transport equations into unitless ones and then solved numerically by employing Galerkin Weighted Residual Method. Analyses reveal that the Casson parameter declines the fluid velocity, while the existence of the melting parameter has the opposite effect. Also, this article includes some future recommendations. 相似文献
Underground mine production scheduling determines when, if ever, activities associated with the extraction of ore should be executed. The accumulation of heat in the mine where operators are working is a major concern. At the time of this writing, production scheduling and ventilation decisions are not made in concert. Correspondingly, heat limitations are largely ignored. Our mixed-integer program maximizes net present value subject to constraints on precedence, and mill and extraction capacities with the consideration of heat using thermodynamic principles, while affording the option of activating refrigeration to mitigate heat accumulation. In seconds to hours, depending on the problem size (up to thousands of activities and 900 daily time periods), a corresponding methodology that exploits the mathematical problem structure provides schedules that maintain a safe working environment for mine operators; optimality gaps are no more than 15% and average less than half that for otherwise-intractable instances.
African yam bean (Sphenostylis stenocarpa) starch was subjected to heat moisture treatments at 18% (HMT-18), 21% (HMT-21), 24% (HMT-24), 27% (HMT-27) and excess (Annealing) moisture levels. Proximate chemical composition of the starch samples revealed that the moisture content of the starches ranged between 6.7% and 12.5%. Following modification of the native starch, there was a reduction in the moisture level of the heat moisture treated starches from HMT-18 to HMT-27. However, the annealed starch (HMT-ANN) retained higher moisture content compared to native starch (AYB-Native). The carbohydrate, protein, ash, amylose and fat content reduced with all the forms of heat treatments. At the temperature range studied (60–90 °C), increasing level of heat moisture treatments reduced the solubility and swelling capacity. pH also exert a profound effect both on the solubility and the swelling of the starch. Increasing degree of alkalinity increased both solubility and swelling capacity. In the native and modified starch samples, replacement of the wheat flour by the starch resulted in increased alkaline water retention of the blends. Water absorption capacity of the starch increased with the severity of moisture treatments, while the oil absorption capacity decreased. Apart from HMT-18, there was improved gel forming capacity of all the other heat-modified starches.Pasting temperature increased after hydrothermal modifications, whereas peak viscosity (Pv), Hot Paste Viscosity (Hv), setback and breakdown values all reduced after heat moisture treatments. All the starches were of type-B viscosity.Differential scanning calorimetry studies revealed that heat moisture treatment shifted the onset temperature (To), peak temperature(Tp) and conclusion temperature (Tc) to higher values. The gelatinisation temperature of the annealed starch was comparable to native starch. In addition, gelatinisation band of the native starch increased progressively from HMT-18 to HMT-27. Heat moisture treatment reduced the gelatinsation enthalpy (ΔH), while the enthalpy of retrogradation(ΔHr) increased with the storage time of the gelatinised starch. Retrogradation enthalpy of the heat moisture conditioned starches were lower than the value obtained for the native starch.X-ray diffraction studies of the starch indicated that all the starch samples showed the type-C diffraction pattern. Differences were however observed in their degree of crystallinity. Native starch exhibited the lowest crystallinity (20%) while annealed starch had the highest crystallinity (27%)Microscopy studies revealed surface indentation, formation of groves in the central region, folding of starch granules and formation of doughnut-like appearance in some of the starch samples. 相似文献
The functional and tableting properties of native (NaFM) and chemically modified (by acetylation, AcFM; and oxidation, OxFM) finger millet starches were investigated. The tablet formation properties of the starches were assessed by Heckel and Kawakita analysis. The swelling power and solubility of the starch increased with increase in temperature with AcFM having the highest swelling power, while OxFM had the highest solubility. X‐ray diffractometry showed that the starches had the characteristic ‘A’ pattern with strong peaks at 3.78, 4.37, 4.87, and 5.17 Å. Chemical modification causes rupture of some starch granules as revealed by the Scanning Electron Micrograph. Chemical modification also leads to improved gelatinisation profile, with reduction in ΔHgel from 9.64 J/g (NaFM) to 3.88 J/g (AcFM) and 8.76 J/g (OxFM). The bulk density and Hausner's ratio increased after chemical modification of the starch. Chemical modification reduced the mean yield pressure, Py (Heckel analysis) but increased the deformability Pk (Kawakita analysis) of the starch compacts. Chemical modification also increased the crushing and tensile strength of the starch compacts, but lowered its disintegration time and friability. 相似文献