An optical instrumentation using a sensor with a sensordummyagainst noises on sensor and transmission line

This short paper discusses the method of effectively canceling equal status normal mode noise not only on a sensor line but also on a transmission line of an optical instrument using a sensor with a sensordummy resistance     

Fabrication of MOD-derived YBCO films on [001]LaAlO/sub 3/ and their application to /spl lambda//4 CPW SIR BPFs

Chemically derived epitaxial thin films of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// (YBCO) are fabricated on [001]LaAlO/sub 3/ substrates by the metalorganic-deposition (MOD) process, which has advantages of high quality, nonvacuum, low-cost, and large-scale production of high-T/sub c/ superconducting films. The MOD-derived YBCO films have a sharp transition at the critical temperature (90.4 K) and a high-quality film with a surface resistance of 0.13 m/spl Omega/ (30 K, 9.98 GHz) is obtained. As a microwave application, simple and compact bandpass filters (BPFs) using /spl lambda//4 coplanar-waveguide. stepped-impedance resonators are demonstrated on the YBCO films. A two-stage Chebyshev BPF of center frequency of 5.731 GHz, bandwidth of 135 MHz, and insertion loss of 0.29 dB with little input power dependency in a power range less than 10 dBm is realized on the film.     

Design of High Speed AWGN Communication Channel Emulator

This paper presents a method for designing a high accuracy white gaussian noise generator suitable for communication channel emulation. The proposed solution is based on the combined use of the Box-Muller method and the central limit theorem. The resulting architecture provides a high accuracy AWGN with a low complexity architecture for a digital implementation in FPGA. The performance is studied by means of MATLAB simulations and various complexity figures are given.     

New application of laser beam to failure analysis of LSI with multi-metal layers

A new technique for failure analysis of LSI with multi metal layers is described. There is a fabrication technique to form a big and optional window on upper layers using Nd-YAG laser without destroying any electrical function, and to approach the failure point through this window. The failure analysis procedure based on logical flow is presented. Fabrication technique is located in part of this procedure which consists of four steps. Two difficult reasons for approaching the failure point without fabrication technique are described. This difficulty results from line composition and line width. The fabrication procedure using Nd-YAG laser is reported. This procedure is to cover the chip surface with photo resist, and form a big and optional size window on upper layer with laser beam, and finally expose the purposed layer. Three failure analysis examples using this technique are introduced: unformed contact falure mode, Si-noduled failure mode, and isolation destroying failure mode.     

Implicit induction in conditional theories

We propose a new procedure for proof by induction in conditional theories where case analysis is simulated by term rewriting. This technique reduces considerably the number of variables of a conjecture to be considered for applying induction schemes. Our procedure is presented as a set of inference rules whose correctness has been formally proved. Moreover, when the axioms are ground convergent and the functions are completely defined, it is possible to apply the system for refuting conjectures. The procedure is even refutationally complete for conditional equations with Boolean preconditions over free constructors. The method is entirely implemented in the proverSPIKE. This system has solved interesting problems in a completely automatic way, that is, without interaction with the user and without ad hoc heuristics. It has also proved the challenging Gilbreath card trick, with only two easy lemmas.Preliminary versions of the results have been presented at the 13th International Joint Conference on Artificial Intelligence, Chambéry (France), 1993 (Bouhoula and Rusinowith, 1993).     

Unsupervised deep learning approach for network intrusion detection combining convolutional autoencoder and one-class SVM

Applied Intelligence - With the rapid advancement in network technologies, the need for cybersecurity has gained increasing momentum in recent years. As a primary defense mechanism, an intrusion...     

Effect of Adding Transition Metals to Copper on the Dehydrogenation Reaction of Ethanol

The present work aims to investigate the effect adding Ag, Co, Ni, Cd and Pt to copper on ethanol dehydrogenation. The catalysts synthesized by deposition–precipitation method were characterized using various physicochemical methods such as N₂ adsorption–desorption, TPR, SEM–EDX, XRD, XPS and TGA–DSC-MS. Catalytic evaluation results revealed that the predominant product of the reaction was acetaldehyde. Monometallic copper or mixed with Cd, Ag or Co show good catalytic performances. Adding nickel to copper improves the process conversion but reduces acetaldehyde selectivity, giving rise to methane in produced hydrogen. Pt-Cu/SiO₂ catalyst guides the reaction towards diethyl ether. Time on stream tests performed during 12 h at 260 °C, showed that adding Cd to Cu enhances its stability by over 30% of conversion, this is explained by the reduction of copper crystallites sintering, which makes Cd-Cu/SiO₂ a promising catalyst for the production of acetaldehyde by ethanol dehydrogenation.

Graphic Abstract