Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Synthesis of amino-cosubstituted polyorganophosphazenes and fabrication of their nanoparticles for anticancer drug delivery

The development of safe drug carriers is cardinal in cancer therapy, which can target the cancer cells and release the loaded drug on-demand without damaging the healthy cells of the body. In our work, we synthesized three different biodegradable polymers, poly[(ethyl aminobezoate) (ethyl glycinato) phosphazenes] (PABGPs), in different mole ratio of side groups. The successful synthesis of these PABGPs was confirmed by ¹H NMR, ³¹P NMR, FT-IR, and gel permeation chromatography. These PABGPs were fabricated into drug (camptothecin, CPT, a hydrophobic anticancer drug) loaded nanoparticles. These drug-loaded nanoparticles showed good drug release behaviors under normal physiological conditions (pH 7.4 and temperature 37°C). These PABGPs-based nanoparticles may find their application as effective drug carriers for cancer therapy.     

Peer drug associations and emotional restraint: Causes or consequences of adolescents' drug use?

A 3-wave longitudinal design was used to examine the relationships among emotional restraint, peer drug associations, and gateway drug use in a sample of 1,256 middle school students. Structural equation modeling was used to compare 3 models: (1) One model viewed drug use as a consequence of emotional restraint and peer variables; (2) 1 viewed drug use as a cause of restraint and peer variables; and (3) 1 included reciprocal effects. All 3 models fit the data fairly well. However, the reciprocal model fit the data significantly better than either of the others. Within this model, low emotional restraint was significantly related to subsequent increases in gateway drug use among boys. In contrast, peer drug models and peer pressure were not related to subsequent changes in gateway drug use. Changes in peer drug models were, however, predicted by previous levels of gateway drug use. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

2-Hydroxy-1, 4-napthoquinone solubilization,thermodynamics and adsorption kinetics with surfactant

2-Hydroxy-1,4-napthoquinone(lawsone) natural red-orange dye was extracted from fresh henna(Lawsonia inermis) leaves in an alkaline media.The lawsone-surfactant solubilization constants(K_(LS))were calculated for the first time by using cationic cetyltrimethylammonium bromide(CTAB) and anionic sodium dodecyl sulphate(SDS).The standard free energy,concentration of solubilized lawsone and number of lawsone molecules solubilized into micelles were calculated and discussed.Surface excess,minimum surface area per molecule,surface pressure,free energy(adsorption and aggregation) and equilibrium constants of different states were determined from tensiometry.Different metal ions(Ag~+,Co~(2+),Cu~(2+),Ni~(2+),Fe~(3+),Zn~(2+) and Al~(3+)) were used to determine the complex forming ability with lawsone.Out of these,Ag~+ ions have strong binding capacity with lawsone.The adsorption of lawsone on the surface of glass with silver ions in presence of CTAB was also observed at pH 9.0.The pseudo-first, secondorder kinetic equation,intraparticles diffusion and Elovich models were used to determine the kinetics of lawsone adsorption onto the surface of glass and a probable mechanism has been discussed.Lawsone adsorption followed second-order kinetic equation(k_2=0.019 g·mg~(-1)·min~(-1)).     

Wear failure of a leaded bronze bearing: Correlation between plant experience and laboratory wear test data

This paper describes an investigation on the failure of a large leaded bronze bearing that supports a nine-ton roller of a plastic calendering machine. At the end of the normal service life of a good bearing, which lasted for seven years, a new bearing was installed. However the new one failed catastrophically within a few days, generating a huge amount of metallic wear debris and causing pitting on the surface of the cast iron roller. Following the failure, samples were collected from both good and failed bearings. The samples were analyzed chemically and their microstructures examined. Both samples were subjected to accelerated wear tests in a laboratory type pin-on-disk apparatus. During the tests, the bearing materials acted as pins, which were pressed against a rotating cast iron disk. The wear behaviors of both bearing materials were studied using weight loss measurement. The worn surfaces of samples and the wear debris were examined by light optical microscope, scanning electron microscope, and energy-dispersive x-ray microanalyzer. It was found that the laboratory pin-on-disk wear data correlated well with the plant experience. It is suggested that the higher lead content (∼18%) of the good bearing compared with 7% lead of the failed bearing helped to establish a protective transfer layer on the worn surface. This transfer layer reduced metal-to-metal contact between the bearing and the roller and resulted in a lower wear rate. The lower lead content of the failed bearing does not allow the establishment of a well-protected transfer layer and leads to rapid wear.     

Adaptive image denoising using cuckoo algorithm

This paper presents a novel denoising approach based on smoothing linear and nonlinear filters combined with an optimization algorithm. The optimization algorithm used was cuckoo search algorithm and is employed to determine the optimal sequence of filters for each kind of noise. Noises that would be eliminated form images using the proposed approach including Gaussian, speckle, and salt and pepper noise. The denoising behaviour of nonlinear filters and wavelet shrinkage threshold methods have also been analysed and compared with the proposed approach. Results show the robustness of the proposed filter when compared with the state-of-the-art methods in terms of peak signal-to-noise ratio and image quality index. Furthermore, a comparative analysis is provided between the said optimization algorithm and the genetic algorithm.     

Data-driven next-generation smart grid towards sustainable energy evolution: techniques and technology review

Meteorological changes urge engineering communities to look for sustainable and clean energy technologies to keep the environment safe by reducing CO2 emissions. The structure of these technologies relies on the deep integration of advanced data-driven techniques which can ensure efcient energy generation, transmission, and distribution. After conducting thorough research for more than a decade, the concept of the smart grid (SG) has emerged, and its practice around the world paves the ways for efcient use of reliable energy technology. However, many developing features evoke keen interest and their improvements can be regarded as the next-generation smart grid (NGSG). Also, to deal with the non-linearity and uncertainty, the emergence of data-driven NGSG technology can become a great initiative to reduce the diverse impact of non-linearity. This paper exhibits the conceptual framework of NGSG by enabling some intelligent technical features to ensure its reliable operation, including intelligent control, agent-based energy conversion, edge computing for energy management, internet of things (IoT) enabled inverter, agent-oriented demand side management, etc. Also, a study on the development of data-driven NGSG is discussed to facilitate the use of emerging data-driven techniques (DDTs) for the sustainable operation of the SG. The prospects of DDTs in the NGSG and their adaptation challenges in real-time are also explored in this paper from various points of view including engineering, technology, et al. Finally, the trends of DDTs towards securing sustainable and clean energy evolution from the NGSG technology in order to keep the environment safe is also studied, while some major future issues are highlighted. This paper can ofer extended support for engineers and researchers in the context of data-driven technology and the SG.     

Observer-based leader-following consensus of one-sided Lipschitz multi-agent systems over input saturation and directed graphs

This paper investigates a local observer-based leader-following consensus control of one-sided Lipschitz (OSL) multi-agent systems (MASs) under input saturation. The proposed consensus control scheme has been formulated by using the OSL property, input saturation, directed graphs, estimated states, and quadratic inner-boundedness condition by attaining the regional stability. It is assumed that the graph always includes a (directed) spanning tree with respect to the leader root to develop matrix inequalities for investigating parameters of the proposed observer and consensus protocols. Further, a new observer-based consensus tracking method for MASs with saturation, concerning independent topologies for communicating outputs and estimates over the network, is explored to deal with a more perplexing and realistic situation. In contrast to the traditional methods, the proposed consensus approach considers output feedback and deals with the input saturation for a generalized class of nonlinear systems. The efficiency of the obtained results is illustrated via application to a group of five moving agents in the Cartesian coordinates.     

Next generation session management for 3D teleimmersive interactive environments

In the recent past we have seen a boom of distributed interactive multimedia environments which use multiple correlated media sensors, multi-view displays, and advanced haptic-audio-visual user interfaces for teleimmersive gaming, business meetings and other collaborative activities. However, when we investigate the emerging teleimmersive environments closer, we realize that their overall session management, including end-to-end session setup, establishment and run-time management are not appropriate for the new demands that these environments present. These environments are cyber-physical rooms that demand (a) large scale of multi-sensory devices across geographically-distributed locations and (b) interaction with each other in synchronous and real-time manner. To deal with the new teleimmersive demands, we present a new session management design with (a) session initiation protocol(s) that understand media correlations, (b) view-based multi-stream topology establishment among multiple parties, (c) efficient, light-weight and distributed session monitoring with querying and debugging capabilities, (d) flexible view-based session adaptation with efficient topology adjustments, and (e) light-weighted and consistent session tear-down protocols. The presented design of the next generation session management protocols, services, algorithms and data structures is based on our extensive experiences with building 3D teleimmersive interactive systems, experimenting with high impact teleimmersive applications and deploying such environments at various venues.