A quadratic spline approximation using detail multi-layer for soft shadow generation in augmented reality

Implementation of shadows is crucial to enhancement of images in AR environments. Without shadows, virtual objects would look floating over the scene resulting in unrealistic rendering of AR environments. Casting hard shadows would provide only spatial information while soft shadows help improve realism of AR environments. Several algorithms have been proposed to render realistic shadows which often incurred high computational costs. Little attention has been directed towards the balanced trade-off between shadow quality and computational costs. In this study, two approaches are proposed: Quadratic Spline Interpolation (QSI) to soften the outline of the shadow and Detail Multi-Layer (DML) technique to optimize the volume of computations for the generation of soft shadows based on real light sources. QSI estimates boarder hard shadow samples while DML involves three main phases: real light sources estimation, soft shadow production and reduction of the complexity of 3-Dimensional objects’ shadows. To be more precise, a reflective hemisphere is used to capture real light and to create an environment map. The Median Cut algorithm is implemented to locate the direction of real light sources on the environment map. Subsequently, the original hard shadows are retrieved and a sample of multilayer hard shadows is produced where each layer has its unique size and colour. These layers overlap to produce soft shadows based on the real light sources’ directions. Finally, the Level of Details (LOD) algorithm is implemented to increase the efficiency of soft shadows by decreasing the complexity of vertex transformations. The proposed technique is tested using three samples of multilayer hard shadows with varying numbers of light sources generated from the Median Cut algorithm. The experimental results show that the proposed technique successfully produces realistic soft shadows at low computational costs.     

Viscoelastic and thermal properties of natural rubber low-density polyethylene composites with boric acid and borax

The influence of boric acid (BA) and borax (BO) neutron-absorbing fillers on thermal stability and viscoelastic behavior of natural rubber (NR) low-density polyethylene composites has been studied. The thermal degradation and dynamic mechanical properties of the composites have been analyzed as a function of temperature. The results revealed the enhancement of thermal stability of the composites by the addition of BA and BO fillers. The flame resistance of the material was improved by the addition of both the fillers. The storage modulus was found to be dependent upon the temperature and nature of the filler. The amount of NR chains immobilized by filler particles has been quantified from dynamic mechanical analysis and secondary filler/filler interactions have been verified by the Payne effect analysis. Finally, the experimental results have been compared with theoretical predictions.     

Contrast enhancement dynamic histogram equalization for medical image processing application

Image processing requires an excellent image contrast‐enhancement technique to extract useful information invisible to the human or machine vision. Because of the histogram flattening, the widely used conventional histogram equalization image‐enhancing technique suffers from severe brightness changes, rendering it undesirable. Hence, we introduce a contrast‐enhancement dynamic histogram‐equalization algorithm method that generates better output image by preserving the input mean brightness without introducing the unfavorable side effects of checkerboard effect, artefacts, and washed‐out appearance. The first procedure of this technique is; normalizing input histogram and followed by smoothing process. Then, the break point detection process is done to divide the histogram into subhistograms before we can remap the gray level allocation. Lastly, the transformation function of each subhistogram is constructed independently. © 2011 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 21, 280‐289, 2011;     

Enhancing the Selectivity and Transparency of the Electron Contact in Silicon Heterojunction Solar Cells by Phosphorus Catalytic Doping

An intrinsic hydrogenated amorphous silicon (a-Si:H(i)) film and a doped silicon film are usually combined in the heterojunction contacts of silicon heterojunction (SHJ) solar cells. In this work, a post-doping process called catalytic doping (Cat-doping) on a-Si:H(i) is performed on the electron selective side of SHJ solar cells, which enables a device architecture that eliminates the additional deposition of the doped silicon layer. Thus, a single phosphorus Cat-doping layer combines the functions of two other layers by enabling excellent interface passivation and high carrier selectivity. The overall thinner layer on the window side results in higher spectral response at short wavelengths, leading to an improved short-circuit current density of 40.31 mA cm⁻² and an efficiency of 23.65% (certified). The cell efficiency is currently limited by sputter damage from the subsequent transparent conductive oxide fabrication and low carrier activation in the a-Si:H(i) with Cat-doping. Numerical device simulations show that the a-Si:H(i) with Cat-doping can provide sufficient field effect passivation even at lower active carrier concentrations compared to the as-deposited doped layer, due to the lower defect density.     

Physicochemical Properties,Fatty Acid Profiles,and Sensory Characteristics of Fermented Beef Sausage by Probiotics Lactobacillus plantarum IIA‐2C12 or Lactobacillus acidophilus IIA‐2B4

Probiotics may be used to enhance the functionality and nutritional values of fermented sausages. This study aims to evaluate the physicochemical and sensory properties of beef sausages fermented by lactic acid bacteria of Lactobacillus plantarum IIA‐2C12 and L. acidophilus IIA‐2B4. These strains were isolated from beef cattle and have shown to display probiotic features. While the nutrient contents were not affected by the probiotics, the pH, texture, and color varied among the sausages. Further analysis on fatty acids showed different profiles of saturated (C14:0, C17:0, and C20:0) and unsaturated (C14:1, C18:1n9c, C18:2n6c, and C22:6n3) fatty acids in sausages with probiotics. Gas chromatography–mass spectrometry further revealed some flavor development compounds including acid, alcohols, aldehydes, aromatic, ketones, sulfur, hydrocarbons and terpenes, varied among the sausages. Hedonic test showed no difference in the preference toward aroma, texture, and color for untrained panelists.     

Bondline shear strength and wood failure of European and tropical hardwood glulams

The study reports on block shear investigations with bondlines of face-glued laminations and matched solid wood specimens from hardwood glulam (GLT) beams produced industrially from eight technically and stand volume-wise important species. The European hardwoods comprised oak, beech, sweet chestnut and ash and the tropical species were teak, keruing, melangangai and light red meranti. The adhesives were phenol-resorcinol and melamine-urea. When combining all species in one sample, a rather strong linear relationship of bond and wood shear strength was observed. The ratio of bond vs. wood shear strength was for all species on the mean value level?≥?0.9, and likewise (with one exception) for the respective strengths’ 5%-quantiles. Consistent with literature, the test results showed no significant correlations between bond shear strength and density, wood shear strength and wood failure percentage of individual species, respectively. The investigations render the methodological basics of some international standards on bond quality verification as being inappropriate. New, empirically validated hardwood GLT bond requirements are proposed for discussion and implementation at the CEN and ISO levels. The strength ratio specifications reflect respective ANSI provisions, yet the reference quantity wood shear strength is now determined in an unbiased manner from matched GLT specimens. The wood failure verification proposal is based on the 10%-quantile and mean level for initial type testing and factory production control. The requirements further account for the pronounced difference observed in scatter of wood failure between European and tropical species.     

Vibration impact acoustic emission technique for identification and analysis of defects in carbon steel tubes: Part B Cluster analysis

Current steel tubes inspection techniques are invasive, and the interpretation and evaluation of inspection results are manually done by skilled personnel. Part A of this work details the methodology involved in the newly developed non-invasive, non-destructive tube inspection technique based on the integration of vibration impact (VI) and acoustic emission (AE) systems known as the vibration impact acoustic emission (VIAE) technique. AE signals have been introduced into a series of ASTM A179 seamless steel tubes using the impact hammer. Specifically, a good steel tube as the reference tube and four steel tubes with through-hole artificial defect at different locations were used in this study. The AEs propagation was captured using a high frequency sensor of AE systems. The present study explores the cluster analysis approach based on autoregressive (AR) coefficients to automatically interpret the AE signals. The results from the cluster analysis were graphically illustrated using a dendrogram that demonstrated the arrangement of the natural clusters of AE signals. The AR algorithm appears to be the more effective method in classifying the AE signals into natural groups. This approach has successfully classified AE signals for quick and confident interpretation of defects in carbon steel tubes.     

Proposed Multiply Charged Ion Source

A proposal is presented in this work for a new type of ion source that employs a hyperbolic potential field for the dual purpose of trapping the plasma ions, and permitting the electrons to impact the trapped ions successively, which by turn render the ions highly stripped. The pvwposed souroe consists of an axially symmetric hyperbolic Penning assembly energized with fixed and cosinusoidal voltage and is immersed in a homogeneous axial magnetic field. The anode and both of the two cathodes follow hyperboloid surfaces of one and two sheets respectively. Extraction of the stripped ions can be accomplished either radially or axially through an extracting system, which is optimized to satisfy Pierce conditions of rectilinear flow. Filtering the extracted ions is done by a quadrupole mass analyzer. Under the influence of the imposed hyperbolic potential field, electrons are allowed to ascillate with bound or unbound trajectories depending on the operating conditions. From the solutions of the equations of motion governing such oscillating electrons, it is possible to optimize the overall performance of the proposed ion source.     

Life cycle costing of thermal energy storage system using CAPEX and OPEX

Journal of Mechanical Science and Technology - Electric chillers and thermal energy storage (TES) tanks are important equipment for gas district cooling plants. One feasible way of assessing the...     

The effect of injection pressure and fuel viscosity on the spray characteristics of biodiesel blends injected into an atmospheric chamber

An experimental study was conducted to examine the effect of injection pressure and fuel type on the spray tip penetration length and the angle of spray injected into atmospheric chamber. The objective of the present study is to formulate empirical correlations of the spray tip penetration and the spray angle for non-evaporative condition. The experiment was performed by a common rail type high-pressure injector for the diesel engine at the injection pressure 40??100 MPa and four different fuels (D100, BD25, BD45, and BD65). The results showed that the biodiesel content increased the spray tip penetration and decreased the spray angle. The correlation of spray tip penetration is expressed for each region before and after spray break-up time in terms of injection pressure, fuel viscosity and time after start of injection. The correlation is also obtained for spray angle equation terms of injection pressure and fuel viscosity.