Stabilization of 6H-Hexagonal SrMnO3 Polymorph by Al2O3 insertion

We demonstrate the structural evolution of polymorphic phases in Al₂O₃-inserted SrMnO₃ ceramics synthesized by solid state reaction. While the 4H-hexagonal phase is predominant in pure SrMnO₃ ceramics, a small amount of 6H-hexagonal polymorph is identified in addition to the primary 4H-hexagonal SrMnO₃ and the secondary hexagonal SrAl₂O₄ phases in the as-sintered ceramics, evidenced by x-ray diffraction and subsequent Rietveld refinement analyses. The existence of the 6H-hexagonal SrMnO₃ phase is corroborated using Raman spectroscopy. The chemical compositions and electronic structures of the Al₂O₃-inserted SrMnO₃ compounds are also examined using energy dispersive spectroscopy and x-ray photoelectron spectroscopy, respectively. The first-principles calculations reveal that there is no clear difference between the total energies of 4H- and 6H-hexagonal polymorphs regardless of the presence/absence of Sr and oxygen vacancies. Possible origins are discussed with the estimation of actual strain based on the refined lattice parameter of 6H SrMnO₃.     

Binodal and spinodal curves: a simulation for various high polymer mixtures

Flory's equation-of-state theory has been used to predict the lower critical solution temperature behaviour of polymer—polymer mixtures. The spinodal phase boundary of numbers of high molecular weight polymer mixtures have been previously simulated using this theory. In this paper a procedure for simultaneous predictions of the binodal and the spinodal curves by equating the chemical potential of each component in the mixture is presented. The method is tested for five different mixtures. The effects of the binary and pure component state parameters on the simulated curves are discussed and the simulated phase diagrams are compared with the experimental cloud point curves. It is found that in most cases the results are more consistent with the cloud point curve being closer to the spinodal curve than the binodal.     

An Insight View on Synthetic Protocol,Surface Activity,and Biological Aspects of Novel Biocompatible Quaternary Ammonium Cationic Gemini Surfactants

In this study, we prepared a novel series of diester-functionalized cationic gemini surfactants (C_m-E2O2-C_m) containing ethylene oxide as a spacer with varying alkyl chain lengths and characterized by ¹H NMR, FT-IR, elemental analysis, and ESI-MS. The physicochemical properties of the geminis were explored by tensiometry, fluorescence, dye solubilization, and Krafft point. These geminis acquire superior surface activity than the conventional surfactants. Fluorescence spectroscopy analysis affirmed that the micropolarity and aggregation number of micelles diminished with increase in the alkyl chain length. These geminis represent a new group of amphiphiles of considerably high biodegradability, better cleavability, and low toxicity as assessed by BOD test, FT-IR analysis, and HC₅₀ analysis, respectively. They also showed significant level of antimicrobial activity toward some specified bacterial strains of Gram-positive and Gram-negative by using agar well diffusion method. Furthermore, the thermogravimetric analysis provided information regarding thermal stabilities of the newly synthesized gemini surfactants.     

Kinetic analysis of plasma VLDL-TG and VLDL-remnant-TG turnover in anesthetized rats

We have estimated the turnover and relative pool sizes of nascent-VLDL-TG and VLDL-remnants-TG in anesthetized rats. [1-¹⁴C]Palmitoyl- and [2-³H]glyceryl-labeled “VLDL”-TG (including nascent VLDL-TG and VLDL-remnants-TG) were prepared by injecting labeled palmitate and glycerol into donor rats. Labeled serum from these rats was then injected intravenously into nembutalized male rats and serial blood samples taken for 30 min. Special care was taken to define any early components in the labeled “VLDL”-TG disappearance curves. In other experiments, the donors were rendered functionally hepatectomized 30 min after injection of³H-glycerol and the endogenous labeled VLDL-TG was allowed to circulate 30–60 min before collection of the TG-labeled VLDL-remnants-containing serum. The latter was injected into 4 recipient nembutalized rats and the remnant-TG-turnover measured by serial sampling as above. In two cases,¹⁴C-“VLDL” and³H-VLDL-remnants were injected as a single bolus into ether-anesthetized rats. Despite its complex composition, “VLDL”-TG in most cases disappeared in a single exponential fashion for 30 min with an average half-life of 5.9 min in nembutalized and 2.8 in ether-anesthetized rats. VLDL-remnants-TG showed a more complex behavior, but contained a major rapid component with a mean t_1/2 of ca. 1.5 min in both groups. The data, analyzed by multicompartmental analysis, were fitted to a simple model in which turnover of a larger nascent VLDL-TG pool with formation of a more rapidly turning over smaller pool of VLDL-remnant-TG is the rate-limiting step in overall TG removal from the d<1.006 fraction of rat serum. The data are consistent with our theoretical prediction that under these conditions the kinetics of the VLDL-remnants cannot be resolved from analysis of the total composite “VLDL” (nascent plus remnant) pool.     

Fuzzy decision support system for fertilizer

Fuzzy geographic information systems is a newly emerging field of computational intelligence. It combines fuzzy logic with spatial context. Most of the natural phenomena are fuzzy in nature. They show a degree of uncertainty or vagueness in their extent and attribute, which cannot be expressed by a crisp value. Agriculture is one of the fields of the spatial domain that needs to be described in fuzzy terms. Fertilizer is a key input for the agriculture sector. In this article, the spatial surfaces of fertilizers are developed for the wheat crop using a fuzzy decision support system. The algorithm of our system takes soil nutrients and cropping time as input, applies fuzzy logic on the input values, defuzzifies the fuzzy output to crisp value, and generates a fertilizer surface. The resultant output surface of fertilizer describes the amount of fertilizer needed to cultivate a specific crop in a specified area. The complexity of our algorithm is \(O(mnr)\) , where \(m\) is the height of the raster, \(n\) is the width of the raster, and \(r\) is the number of expert rules.     

Aqueous solution of Oxone as new oxidizing agent for multi-walled carbon nanotube functionalization

In this work, multi-wall carbon nanotube (MWCNT) was successfully modified using aqueous solution of Oxone as a new oxidant. The effect of oxidation temperature on various characteristics of the treated MWCNTs was also investigated. FTIR and titration analysis proved the formation of carboxyl, carbonyl and epoxide groups at the surface of MWCNTs. The concentration of the functional groups increased as the modification temperature increased. The presence of such oxygen containing groups at the surface of MWCNTs justified the long time stability of the treated MWCNTs suspensions in water and methanol. The modified MWCNTs showed higher entanglement compared to row MWCNT due to the cross-links adjacent effect of pendant functional groups. Finally, it was concluded that Oxone oxidation process destroys the structure of the MWCNTs, but not severe enough to unzip the MWCNTs.     

Semantic partitioning of peer-to-peer search space

Peer-to-peer (P2P) networks are beginning to form the infrastructure of future applications. Computers are organized in P2P overlay networks to facilitate search queries with reasonable cost. So, scalability is a major aim in design of P2P networks. In this paper, to obtain a high factor of scalability, we partition network search space using a consistent static shared upper ontology. We name our approach semantic partition tree (SPT). All resources and queries are annotated using the upper ontology and queries are semantically routed in the overlay network. Also, each node indexes addresses of other nodes that possess contents expressible by the concept it maintains. So, our approach can be conceived as an ontology-based distributed hash table (DHT). Also, we introduce a lookup service for the network which is very scalable and independent of the network size and just depends on depth of the ontology tree. Further, we introduce a broadcast algorithm on the network. We present worst case analysis of both lookup and broadcast algorithms and measure their performance using simulation. The results show that our scheme is highly scalable and can be used in real P2P applications.     

Development and performance characterization of a new standard mercury manometer

A new standard mercury manometer has been developed to calibrate low vacuum gauges in the range from atmospheric pressure to 1 mbar. It consists of a cistern that is a small stainless steel container used as mercury reservoir and also as the first Hg column connected to a long glass tube used as the second Hg column. Manometer scale covers the difference in Hg heights in two columns up to the length equivalent to 1000 mbars. This is a novel low cost manometer with simple design, compact fabrication, better accuracy, easy operation, low vibration, and thermal stability. In order to evaluate the performance of the equipment, its generated pressures are compared with those of secondary standard, i.e., calibrated capacitance diaphragm gauge, giving the average correction factor 0.998. Different uncertainties of the generated pressures are discussed in detail along with the evaluation of correction factors. The relative uncertainty in the higher pressure side is found to be in the range of 10(-4) which is within the limit (approximately 10(-4)).     

Properties of cu-doped low resistive ZnSe films deposited by two-sourced evaporation

Two-sourced evaporation technique is used to prepare hard ZnSe films by controlling the evaporation rates of both Zn and Se at substrate temperature of 400 °C. The films are doped with Cu by immersion in the Cu(NO₃)₂-H₂O solution for different periods of time. The XRD has not shown a drastic change in the film structure while the electrical resistivity of the deposited film dropped from 10⁹ Ω-cm to about 1.6 Ω-cm for solution immersed films after heat treatment. Optical properties of deposited and doped films, such as film thickness, absorption coefficient and optical band gap have been calculated from the normal transmission spectra in the range of 300-2200 nm.The optical results show a decrease of the transmission and an increase of the refractive index and a slight shift in the optical band gap. Chemical composition of the Cu is determined by using absorption of immersed films. The composition of Cu is also compared with the composition detected by electron microprobe analyzer (EMPA).