Effect of cellulose acetate/cellulose triacetate ratio on reverse osmosis blend membrane performance

Surface functionalization and modification including the grafting process are effective approaches to improve and enhance the reverse osmosis (RO) membrane performance. This work is aimed to synthesize grafted/crosslinked cellulose acetate (CA)/cellulose triacetate (CTA) blend RO membranes using N-isopropylacrylamide (N-IPAAm) as a monomer and N,N-methylene bisacrylamide (MBAAm) as a crosslinker. The morphology of these membranes was analyzed by scanning electron microscopy and their surface roughness was characterized by atomic force microscopy. The performance of these membranes was evaluated through measuring two major parameters of salt rejection and water flux using RO unit at variable operating pressures. It was noted that the surface average roughness obviously decreased from 148 nm for the pure CA/CTA blend membrane with 2.5% CTA to 110 nm and 87 nm for the grafted N-IPAAm and grafted/crosslinked N-IPAAM/MBAAm/CA/CTA-RO membranes, respectively. Moreover, the contact angle decreased from 51.98° to 47.6° and 43.8° after the grafting and crosslinking process. The salt rejection of the grafted CA/CTA-RO membrane by 0.1% N-IPAAm produced the highest value of 98.12% and the water flux was 3.29 L/m²h at 10 bar.     

Edge Computing Platform with Efficient Migration Scheme for 5G/6G Networks

Next-generation cellular networks are expected to provide users with innovative gigabits and terabits per second speeds and achieve ultra-high reliability, availability, and ultra-low latency. The requirements of such networks are the main challenges that can be handled using a range of recent technologies, including multi-access edge computing (MEC), artificial intelligence (AI), millimeter-wave communications (mmWave), and software-defined networking. Many aspects and design challenges associated with the MEC-based 5G/6G networks should be solved to ensure the required quality of service (QoS). This article considers developing a complex MEC structure for fifth and sixth-generation (5G/6G) cellular networks. Furthermore, we propose a seamless migration technique for complex edge computing structures. The developed migration scheme enables services to adapt to the required load on the radio channels. The proposed algorithm is analyzed for various use cases, and a test bench has been developed to emulate the operator’s infrastructure. The obtained results are introduced and discussed.     

Dynamic and scalable multi-level trust management model for Social Internet of Things

The Internet of Things (IoT) is a paradigm that has made everyday objects intelligent by offering them the ability to connect to the Internet and communicate. Integrating the social component into IoT gave rise to the Social Internet of Things (SIoT), which has helped overcome various issues such as heterogeneity and navigability. In this kind of environment, participants compete to offer a variety of attractive services. Nevertheless, some of them resort to malicious behaviour to spread poor-quality services. They perform so-called Trust-Attacks and break the basic functionality of the system. Trust management mechanisms aim to counter these attacks and provide the user with an estimate of the trust degree they can place in other users, thus ensuring reliable and qualified exchanges and interactions. Several works in literature have interfered with this problem and have proposed different Trust-Models. The majority tried to adapt and reapply Trust-Models designed for common social networks or peer-to-peer ones. That is, despite the similarities between these types of networks, SIoT ones present specific peculiarities. In SIoT, users, devices and services are collaborating. Devices entities can present constrained computing and storage capabilities, and their number can reach some millions. The resulting network is complex, constrained and highly dynamic, and the attacks-implications can be more significant. In this paper, we propose DSL-STM a new dynamic and scalable multi-level Trust-Model, specifically designed for SIoT environments. We propose multidimensional metrics to describe and SIoT entities behaviours. The latter are aggregated via a Machine Learning-based method, allowing classifying users, detecting attack types and countering them. Finally, a hybrid propagation method is suggested to spread trust values in the network, while minimizing resource consumption and preserving scalability and dynamism. Experimentation made on various simulated scenarios allows us to prove the resilience and performance of DSL-STM.

     

Linear and nonlinear viscoelastic and viscoplastic analysis of asphalt binders with warm mix asphalt additives

Warm-Mix Asphalt (WMA) is a widely used product, which proved a contribution to the reduction in asphalt mixing and compaction temperatures. This reduction leads to lower fuel consumption and smoke emission in asphalt plants. Most of the characterisation of binders used in WMA has focused in the past on measuring linear viscoelastic properties and associated Superpave parameters. Several studies have shown that the average stresses and strains of the asphalt mixture remain mostly within the linear viscoelastic response. However, localised strains in the binder phase of the mixture could reach values high enough to induce nonlinear viscoelastic and viscoplastic deformations. Therefore, this study focuses on an experimental and analytical evaluation of linear, nonlinear viscoelastic and viscoplastic responses of selected binders modified for use in WMA. The first part of the paper analyses the linear viscoelastic material properties and their ability to evaluate permanent deformation resistance. Then, the non-recoverable creep compliance parameter obtained from the Multiple Stress Creep Recovery (MSCR) test is analysed to assess the nonlinear response and permanent deformation of asphalt binders. The paper utilises a nonlinear plasto-viscoelastic (NPVE) approach to assess and quantify the nonlinear plasto-viscoelastic response of binders by separating the recoverable and irrecoverable strains measured in the MSCR test. Two WMA additives were included in this study by mixing them with polymer-modified and unmodified asphalt binders. Analysis of results showed that the NPVE approach captured a higher percentage of recovery than the NLVE approach. However, binder’s performance evaluation and ranking did not change by adopting the NPVE approach. The nonlinear viscoelastic parameters provided insight on the behaviour of asphalt binders mixed with WMA additives during loading cycles. Sasobit showed higher influence than Advera on binders in resisting permanent deformation by increasing the recoverable strain during the unloading phase.     

Novel nano polymeric system containing biosynthesized core shell silver/silica nanoparticles for functionalization of cellulosic based material

An innovative strategy for functional finishing of cellulosic based materials is based on the incorporation of a thin layer of surface modifying systems (SMS) in the form of stimuli-sensitive nanogels containing combining metal nanoparticles and silica. The silver–silica core–shell nanoparticles (NPs) were synthesized by simple one pot chemical method. Silica/silver nanoparticles have been synthesized using low concentration of dextran as reducing and stabilizing agent and using ascorbic acid as antioxidant agent. The core–shell NPs were characterized for their structural, morphological, compositional and optical behaviour using X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. Stimuli-responsive nanogel was prepared by copolymerization of poly(N-isopropylacrylamide) with pullulan, results in a nanogel that is responsive to both temperature and pH, the nano-particulate hydrogel of poly-NiPAAm-pullulan copolymer was synthesized using surfactant-free emulsion method. The prepared nano-particles were used during the preparation steps of the pullulan nanogel to obtain nanogel/combining metal/silica NPs to produce a composite materials. The nanoparticle size in dry (collapsed) state is estimated at 250 nm by SEM and TEM, and effect of temperature and pH on gel-nanoparticles was investigated by DLS and UV–vis spectrophotometry. The incorporation of the nanoparticles to cellulosic material was done by a simple pad dry-cure procedure from aqueous nanoparticle dispersion that contained a cross-linking agent. This application method provided sufficient integrity to coating by maintaining the responsiveness of surface modifying system. The stimuli responsiveness of modified cellulosic materials has been confirmed in terms of regulating its water uptake in dependence of pH and temperature.     

Knowledge Based Supervised Fuzzy-Classification: An Application to Image Processing

In this paper, we take an interest in representation and treatment of imprecision and uncertainty in order to propose an original approach to approximate reasoning. This work has a practical application in supervised learning pattern recognition. Production rules whose conclusions are accompanied by belief degrees, are obtained by supervised learning from a training set. The proposed learning method is multi-featured, it allows to take into account the possible predictive power of a simultaneously considered feature conjunction. On the other hand, the feature space partition allows a fuzzy representation of the features and data imprecision integration. This uncertainty is managed in the learning phase as well as in the recognition one. To introduce more flexibility and to overcome the boundary problem due to the manipulations of membership functions of fuzzy sets, we propose to use a context-oriented approximate reasoning. For this purpose, we introduce an adequate distance to compare neighbouring facts. This distance, measuring imprecision, combined with the uncertainty of classification decisions represented by belief degrees, drives the approximate inference. The proposed method was implemented in a software called SUCRAGE and confronted with a real application in the field of image processing. The obtained results are very satisfactory. They validate our approach and allow us to consider other application fields.     

A systematic approach to integrate common timed security rules within a TEFSM-based system specification

Context

Formal methods are very useful in the software industry and are becoming of paramount importance in practical engineering techniques. They involve the design and modeling of various system aspects expressed usually through different paradigms. These different formalisms make the verification of global developed systems more difficult.

Objective

In this paper, we propose to combine two modeling formalisms, in order to express both functional and security timed requirements of a system to obtain all the requirements expressed in a unique formalism.

Method

First, the system behavior is specified according to its functional requirements using Timed Extended Finite State Machine (TEFSM) formalism. Second, this model is augmented by applying a set of dedicated algorithms to integrate timed security requirements specified in Nomad language. This language is adapted to express security properties such as permissions, prohibitions and obligations with time considerations.

Results

The proposed algorithms produce a global TEFSM specification of the system that includes both its functional and security timed requirements.

Conclusion

It is concluded that it is possible to merge several requirement aspects described with different formalisms into a global specification that can be used for several purposes such as code generation, specification correctness proof, model checking or automatic test generation. In this paper, we applied our approach to a France Telecom Travel service to demonstrate its scalability and feasibility.     

Physiological and biochemical markers in the process of resistance and/or tolerance of heavy metals in the abandoned mining area of Sidi Kamber,Skikda, Algeria

This paper reports the biomonitoring of metallic pollution in the mine of Sidi Kamber Skikda town, to determine the resistance and/or tolerance to Zn, Pb, Cd and Cu in metalliferous plants. During the period of March–May, 2015, soil and plants samples were collected from three different stations in the study area. The total heavy metal fraction was determined by ICP/MS, whereas biochemical markers were determined by spectrophotometric techniques. The results obtained showed high levels of heavy metals in soil and plants compared to international standards. The translocation factor revealed that the studied plants can transfer and/or accumulate metals in their roots or their aerial parts as a function of characteristics of each metal, soil contents and physiological role in the plant. The contents of chlorophyll, proline, total sugars and total proteins are directly influenced by changes in bioavailable contents of heavy metals. It has been found that the plants studied and biomarkers are better suited for phytoremediation and biomonitoring of heavy metals pollution.     

Effect of extraction methods on kinetic,chemical composition and antibacterial activities of Tunisian Thymus vulgaris. L. essential oil

The present study aims to compare two innovative extraction techniques: microwave-assisted hydrodistillation (MAHD) and solvent-free microwave extraction (SFME) through traditional extraction techniques: hydrodistillation (HD) and steam distillation (SD) for their efficiency in the extraction of the volatile compounds from Tunisian Thymus vulgaris leaves; the kinetic, yield, composition and antibacterial activities of the essential oil were assessed in vitro. Results show that the essential oils extracted by microwaves were quantitatively (yield) similar to those obtained through the conventional methods, but qualitatively, essential oils analysed by gas chromatography–mass spectrometry (GC–MS) presented 17, 11, 11 and 8 compounds obtained through SFME, MAHD, SD and HD, respectively, mostly consisting of carvacrol (89.24–41.17%), followed by γ-terpinene (11.37–1.37%) and para-cymene (27.95–2.05%). The essential oils were screened for antibacterial activity against 5 microorganisms. All essential oils obtained by studied extraction methods showed the same resistance against Gram (?) and Gram (+) bacteria. The SFME method gave the best results: rapid kinetic of extraction (30 min vs. 35 min for MAHD, 120 min for SD, and 180 min for HD), less energy saving and cleanest process.