Soret and Dufour effects between two rectangular plane walls with heat source/sink

This study addresses the thermo‐diffusion and the diffusion‐thermo phenomena in a semi‐infinite absorbent channel whose walls are contracting/expanding, with heat source/sink effects. The governing partial differential equations with suitable boundary conditions are transformed to a system of dimensionless ordinary differential equations. An analytic solution of the problem has been found using a technique called homotopy analysis method (HAM). HAM gives consistently valid answers to the problem over an extensive variety of parameters and also provides better accuracy. To validate the analytical results, a comparison has been presented with a numerical solution calculated by using the parallel shooting method. The effects of dimensionless parameters, that is, deformation parameter, Reynolds number, Soret and Dufour numbers, and heat source/sink parameter on the expressions of velocity, temperature, and concentration profiles are analyzed graphically to understand the physics of the deformable channel. It has been noted that the velocity across the channel is higher for the expanding channel, as compared to that for the contracting channel. Also the Soret and Dufour number increases the temperature of the fluid, and decreases the concentration. The temperature profile has an increasing behavior in the case of heat source, and a decreasing behavior in the case of heat sink.     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Prediction of the maximum spoutable height in spout-fluid beds

The development of the semi-theoretical correlation in Hadzisdmajlovic et al. (1983) for predicting the maximum spoutable height in a spout-fluid bed, is observed to involve certain discrepancies. Based on their experimental data, a new correlation is proposed.     

A fuzzy logic rule-based automatic target recognizer

Methods for modeling and managing uncertainty in computer vision systems have received increased attention in recent years. Automatic target recognition is one application area of computer vision where the demands are particularly acute. In this article, fuzzy logic is proposed as a means of handling uncertainty in an expert system structure for automatic target recognition. A new technique for logical inference is described which is well-suited for this type of application. A prototype system has been developed and tested on multisensor and temporal images. the results are compared to a similar expert system which used a numeric uncertainty calculus.     

Computations of Explosive Boiling in Microgravity

Dynamics of the explosive growth of a vapor bubble in microgravity is investigated by direct numerical simulation. A front tracking/finite difference technique is used to solve for the velocity and the temperature field in both phases and to account for inertia, viscosity, and surface deformation. The method is validated by comparison of the numerical results with the available analytical formulations such as the evaporation of a one-dimensional liquid/vapor interface, frequency of oscillations of capillary waves, and other numerical results. Evolution of a three-dimensional vapor nucleus during explosive boiling is followed and a fine scale structure similar to experimental results is observed. Two-dimensional simulations yield a similar qualitative instability growth.     

Incorporation of a Regularization Term to Control Negative Correlation in Mixture of Experts

Combining accurate neural networks (NN) in the ensemble with negative error correlation greatly improves the generalization ability. Mixture of experts (ME) is a popular combining method which employs special error function for the simultaneous training of NN experts to produce negatively correlated NN experts. Although ME can produce negatively correlated experts, it does not include a control parameter like negative correlation learning (NCL) method to adjust this parameter explicitly. In this study, an approach is proposed to introduce this advantage of NCL into the training algorithm of ME, i.e., mixture of negatively correlated experts (MNCE). In this proposed method, the capability of a control parameter for NCL is incorporated in the error function of ME, which enables its training algorithm to establish better balance in bias-variance-covariance trade-off and thus improves the generalization ability. The proposed hybrid ensemble method, MNCE, is compared with their constituent methods, ME and NCL, in solving several benchmark problems. The experimental results show that our proposed ensemble method significantly improves the performance over the original ensemble methods.     

Using genetic algorithm for the optimization of seismic behavior of steel planar frames with semi-rigid connections

Beam-column connections have a significant role in the results of the analysis and the design of steel frames. In this paper, a genetic algorithm has been used for the non-linear analysis and design of steel frames. For minimizing the weight of frames, while satisfying the applied constraints and restraints such as the limits of normal and combined stresses, criteria such as target displacement(s) and the number and locations of plastic hinges were used. To analyze and design the frame elements, I and box-shaped standard sections were used for beams and columns, respectively. Finally, some clues for finding optimizing semi-rigid connection stiffness values for beam-to-column connections have been obtained. The degrees of these rigidities are obtained by a genetic algorithm during the procedure of optimization in order to reach a frame with the minimum weight. SAP2000 structural analysis program was used to perform modal analysis and linear and non-linear static solutions as well as the design of the elements. A MATLAB program was written for the process of optimization. The procedure of optimization was based on a weight minimization carried out for 9 steel frames. Thus, the optimum connection stiffness could be obtained for minimizing the weight of the structure. The results show that the non-linear analysis gives less weight for short period frames with semi-rigid connections compared to those of linear ones. However, by increasing the periods of frames, much less weights are obtained in the case of non-linear analysis with semi-rigid connections.     

Thai Tea Seed Oil and Virgin Olive Oil Similarly Reduce Plasma Lipids: A Pilot Study within a Healthy Adult Male Population

The potential cardiovascular benefit of virgin olive oil (VOO) is widely recognized. However, the use of VOO at very high cooking temperatures makes these oils poorly suited for many Asian dishes. The use of tea seed oil (TSO) is increasing in Thailand, with TSO having a higher smoke point than VOO. The current study examines the effects of daily TSO intake in healthy adults. In a randomized, single-blind crossover design, 12 men consumed for 3 weeks 40 g day⁻¹ of food prepared with either TSO or VOO as a cooking oil. Plasma lipids, thiobarbituric acid reactive substances (TBARS), and oxidant defense enzyme activities are measured before and after each 3-week intervention period. Gas chromatography analysis of TSO and VOO demonstrates that both oils are equally high in monounsaturated fatty acid. The dietary incorporation of TSO and VOO for three weeks reduces low-density lipoprotein cholesterol (LDL-C) concentrations by 15% and 13%, respectively; with total cholesterol (TC) levels lowered by 10% in both groups. No significant changes in TBARS or antioxidant enzyme activity is observed. These results support the concept that Thai TSO can be utilized as a suitable and healthy alternative oil for high-temperature cooking in many Thai and Asian diets. Practical Applications: Tea seed oil from Camellia oleifera grown in Thailand has been recently reported to favorably lower lipid profiles in hamsters fed a high-fat diet in a manner similar to feeding refined olive oil or grapeseed oil. A pilot crossover trial is conducted to compare the effects of three weeks of daily intake of either TSO or VOO in healthy human adults. Consumption of both oils produced significant reductions in TC and LDL-C. Thai TSO leads to favorable lipid profiles and is a reasonable choice for many Thai and Asian food recipes.     

Role of situational method engineering to improve visual information systems in agile distributed environment

Software product prone to continuous evolution due to increase in the use of technology. Therefore, more stakeholders are involved in software evolution increases the cost and complexity. This required optimization of resources and cost to handle evolution with Global Software Development (GSD) to utilize time zones efficiently. The significance challenge of GSD reports: time zone difference, geographical location, communication delays, knowledge sharing, control among stakeholders and development team. Because of these challenges, the requirements for development in GSD environment are also challenge as compared to on site development. Different requirement engineering methods have been used to improve the requirements analysis to deal with ambiguities and inconsistency in large set of requirements. The customization and tailoring of requirements according to changing project’s situations required to improve project development with reusing existing agile methods during requirement engineering phase. Moreover, complex information systems where heterogeneity is inevitable that implies the involvement of divergent stakeholders and necessitate a comprehensive framework to capture multidimensional viewpoints and fulfill aforementioned issues. Therefore, a situational multi-dimensional agile requirement engineering method has been proposed to support team and stakeholders’ viewpoints. The schema of the proposed method is based on challenges recognized by performing Literature Review. Then proposed method has been evaluated via experimental approach and statistical analysis conducted to validated reliability of data collected. This result is significant approved both practically and statistically that the proposed approach ease to use, implement, trained and increased productivity and performance. Hence, the experimental study for the evaluation of the proposed approach results concluded that, proposed approach is the important multimedia tool for supporting organization and distributed development team for information sharing, collaboration, product development.

     

Modulation Based Combination of High Level Features Generated from SCCF & Contourlet Transforms for CBIR Applications

The need for suitable and cost-effective technologies rise with the growth of the internet of things (IoT) applications. These aim at handling voluminous data transmission in addition to minimum energy and latency cost constraints. LoRa networks are recommended for applications in confined spaces, long ranges, and less battery consumption requirements. However, the end devices in these networks communicate to all gateways in their ranges, thereby expediting energy unproductively in redundant transmissions. In our article, we explore the possibilities of whether LoRa networks could employ the advantages of clustering and propose two algorithms, path-based and data-centric, for such networks. We suggest that LoRaWAN technology with clustering can be apt for long-range, low power consumption IoT applications in the future. We study the impact of network density, node range, and cluster range on the energy consumption in data transmissions. The algorithms are compared with the inherent star-based communication of LoRa networks based on energy consumed, and our results show that, for dense deployments, clustering becomes advantageous.