Engineering egress data considering pedestrians with reduced mobility

To quantify the evacuation process, evacuation practitioners use engineering egress data describing the occupant movement characteristics. These data are typically based to young and fit populations. However, the movement abilities of occupants who might be involved in evacuations are becoming more variable—with the building populations of today typically including increasing numbers of individuals: with impairments or who are otherwise elderly or generally less mobile. Thus, there will be an increasing proportion of building occupants with reduced ability to egress. For safe evacuation, there is therefore a need to provide valid engineering egress data considering pedestrians with disabilities. Gwynne and Boyce recently compiled a series of data sets related to the evacuation process to support practitioner activities in the chapter Engineering Data in the SFPE Handbook of Fire Protection Engineering. This paper supplements these data sets by providing information on and presenting data obtained from additional research related to the premovement and horizontal movement of participants with physical‐, cognitive‐, or age‐related disabilities. The aim is to provide an overview of currently available data sets related to, and key factors affecting the egress performance of, mixed ability populations which could be used to guide fire safety engineering decisions in the context of building design.     

Proton-Detected Solid-State NMR of the Cell-Free Synthesized α-Helical Transmembrane Protein NS4B from Hepatitis C Virus

Proton-detected 100 kHz magic-angle-spinning (MAS) solid-state NMR is an emerging analysis method for proteins with only hundreds of microgram quantities, and thus allows structural investigation of eukaryotic membrane proteins. This is the case for the cell-free synthesized hepatitis C virus (HCV) nonstructural membrane protein 4B (NS4B). We demonstrate NS4B sample optimization using fast reconstitution schemes that enable lipid-environment screening directly by NMR. 2D spectra and relaxation properties guide the choice of the best sample preparation to record 2D ¹H-detected ¹H,¹⁵N and 3D ¹H,¹³C,¹⁵N correlation experiments with linewidths and sensitivity suitable to initiate sequential assignments. Amino-acid-selectively labeled NS4B can be readily obtained using cell-free synthesis, opening the door to combinatorial labeling approaches which should enable structural studies.     

Responses of practicing psychologists to a web site developed to promote empirically supported treatments.

Increased adoption of empirically supported treatments (ESTs) has been hindered in part by inadequate and inconvenient access to EST information and training. To improve diffusion of ESTs, the authors developed a Web application to provide practitioners with concise information by disorder on ESTs. The resulting site, therapyadvisor.com, was evaluated by 239 practicing psychologists to assess the usefulness of the site and explore possible interactions of EST attitudes on ratings of usefulness and impact. Two thirds of participants indicated using ESTs in practice, and limited time and resources were cited as primary barriers to EST adoption. The Web application was rated positively by most participants and was reported to increase awareness of and commitment to try ESTs among approximately 60% of participants. The results of this project support the feasibility of a Web application to increase diffusion and promote further adoption of ESTs. Technological and e-learning advances are promising directions for encouraging the adoption of ESTs specifically and evidence-based practice generally, particularly among busy practitioners who have inadequate time and resources for more traditional forms of dissemination and training. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Strawberry juice colour: The effect of some processing variables on the stability of anthocyanins

The colour stability of juice and purées made from a mixture of two strawberry varieties, stored at + 20°C or at –20°C under aerobic and anaerobic conditions, was studied. High-performance liquid chromatography and spectrophotometric analysis were used to monitor the changes in colour during storage. Pelargonidin 3-glucoside comprised 80% of the total anthocyanin content. Four other pelargonidin-based peaks were found, being 10.4%, 3.5%, 0.7% and 0.3% of the total and two cyanidin peaks were present, being 3.3% and 0.4% of the total. Clarification before storage caused considerable losses in the initial anthocyanin concentrations. Storage conditions (air versus nitrogen) did not influence the rate of loss of anthocyanins during storage or the formation of polymeric pigments. There were no losses in anthocyanins and no increase in the amount of colour measured at 510 nm due to polymers in samples stored at–20°C. Polymerisation occurred in the samples stored at + 20°C, especially in the clarified samples.     

Model-driven design for the visual analysis of heterogeneous data

As heterogeneous data from different sources are being increasingly linked, it becomes difficult for users to understand how the data are connected, to identify what means are suitable to analyze a given data set, or to find out how to proceed for a given analysis task. We target this challenge with a new model-driven design process that effectively codesigns aspects of data, view, analytics, and tasks. We achieve this by using the workflow of the analysis task as a trajectory through data, interactive views, and analytical processes. The benefits for the analysis session go well beyond the pure selection of appropriate data sets and range from providing orientation or even guidance along a preferred analysis path to a potential overall speedup, allowing data to be fetched ahead of time. We illustrate the design process for a biomedical use case that aims at determining a treatment plan for cancer patients from the visual analysis of a large, heterogeneous clinical data pool. As an example for how to apply the comprehensive design approach, we present Stack'n'flip, a sample implementation which tightly integrates visualizations of the actual data with a map of available data sets, views, and tasks, thus capturing and communicating the analytical workflow through the required data sets.     

Model for knowledge and legal expert systems

This paper presents a four layer model for working with legal knowledge in expert systems. It distinguishes five sources of knowledge. Four contain basic legal knowledge found in published and unpublished sources. The fifth consists of legal metaknowledge. In the model the four basic legal knowledge sources are placed at the lowest level. The metaknowledge is placed at levels above the other four knowledge sources. The assumption is that the knowledge is represented only once. The use of metaknowledge at various levels should make it possible to use the appropriate knowledge for the problem presented to the system. The knowledge has to be represented as closely to the original format as possible for this purpose. Suitable representation formalisms for the various types of knowledge in the five knowledge sources are discussed. It is not possible to indicate a best representation formalism for each knowledge source.     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

Suppression of the development of pores during laser-induced surface dispersion of TiC into aluminium, by means of a static magnetic field

A static magnetic field having the strength of B=0.6 T has been used as an additional process parameter in order to suppress the establishment of pores while dispersing TiC particles in surface layers of aluminium alloys using a laser. The migration of hydrogen towards regions of high temperatures within the melting pool can lead to the creation of gas bubbles, therefore yielding pores after resolidification in the processed layer. This mechanism (known for instance in welding technologies of aluminium) could be suppressed by Lorentz-forces induced by an externally applied magnetic field. It could be shown experimentally that magnetic fields could assist laser surface treatment processes beneficially if higher beam powers were coupled in. This may be interesting if, for instance, thicker dispersed layers should be achieved.