Low-temperature post-treatment of anaerobically treated-sewage in anaerobic filter with cationic-polymer addition.

The post-treatment of domestic sewage pretreated in a 6 m3 UASB was investigated in two high-rate anaerobic filter (AF) reactors operated in parallel. The difference between the two AF reactors was only the addition of cationic polymer to the second reactor (AF + P). The reactors were operated at low temperatures, ranged between 13 and 20 degrees C. The media in each AF reactor consisted of vertical sheets of reticulated-polyurethane foam (RPF) with knobs. The results demonstrated that the AF + P reactor (HRT = 3 h) with cationic polymer addition (2 mg/L) was an efficient system for post-treatment. The removal efficiencies for total, suspended, colloidal and dissolved COD were, respectively, 41, 86 and 76 and 12% in the AF + P reactor and they were, respectively, 80, 97, 77 and 66% in the UASB + (AF + P) system. The removal of total, suspended and colloidal COD in the UASB + (AF + P) system were significantly higher than those achieved in the UASB + AF system. As hardly any nutrient was removed in the UASB + (AF + P) system, the effluent after pathogen removal is a valuable product for irrigation and fertilisation to close the water and nutrients cycle.     

Structure of soya glycinin and conglycinin gels

Gels of glycinin and conglycinin formed at various heating temperatures, in the absence and presence of 0.2M sodium chloride were characterised by transmission electron microscopy. In distilled water both proteins formed gels consisting of strands with a thickness of 10–15 nm. The strands of glycinin were very regular and cross sections of strands showed a hollow cylindrical structure. In the presence of sodium chloride, glycinin formed an aggregated gel structure at 85°C, but at 95°C an ordered strand structure was formed. Dissociation of the quaternary structure on heating and reassociation of subunits into regular strands were considered the most probable mechanisms for strand formation from glycinin. The aggregated structure at 85°C was interpreted as a transient state prior to dissociation. Conglycinin rich gels were less regular and more crosslinked than gels of glycinin. Also, the strands of conglycinin showed a complex mode of aggregation possibly in the form of double spirals. The addition of sodium chloride caused a denser and more aggregated structure at 75 and 85°C, but the effects were not as drastic as in the case of glycinin. Heating temperature had only minor effects on the gel structure in the range studied.     

Frontoethmoidal meningoencephaloceles: a review of 14 consecutive patients

Over a period of 4.5 years, 14 patients with frontoethmoidal meningoencephaloceles were treated. Most patients came from Northern Namibia. Precise delineation of all cranial abnormalities was obtained by modern imaging techniques, and specific patterns of cerebral abnormality were found. The malformation was corrected in a single stage, and significant modifications have been developed to render the procedure simpler and safer. Information from our series favors delayed neural tube closure as the primary pathogenesis of the defect and suggests a common teratogen as the most probable etiological agent. Our experience leads us to advocate early correction of even small defects.     

Characterisation and biological treatment of greywater.

Characterisation of greywater was conducted in two different greywater streams in the Netherlands (Groningen and Sneek). The concentrations of macropollutants and nutrients measured were very different in both streams; in particular the COD was 425 mg/L in Groningen's water whereas in Sneek it was 1,583 mg/L. The aerobic treatment of greywater in a fed-batch reactor led to a 90% removal of COD at different organic loading rates. Anaerobically, the removal reached 40% COD removal on average, the possible reason being the high amount of surfactants present in the influent.     

Sodium Coordination Environments in Silica Films

The local structure centered on sodium after diffusion in silica (Na-SiO₂ samples) has been determined by means of extended X-ray absorption fine structure (EXAFS) studies. The Na-SiO₂ samples are of particular interest because (i) their sodium content can be varied over a wide range of concentration and (ii) their local structure is representative of that of soda–silica glass. EXAFS analyses reveal the existence of a well-defined local structure involving oxygen, sodium, and silicon neighbors. The Na-O, Na-Na, and Na-Si bonds lengths, which amount to 0.23, 0.30, and 0.38 nm, respectively, do not depend on sodium concentration. This environment closely resembles that found in soda–silica glass. Moreover, it is compatible with the "target site" and "the site memory effect" suggested by recent theories of the ionic conductivity in oxide glasses.     

Resource recovery from source separated domestic waste(water) streams; full scale results

A major fraction of nutrients emitted from households are originally present in only 1% of total wastewater volume. New sanitation concepts enable the recovery and reuse of these nutrients from feces and urine. Two possible sanitation concepts are presented, with varying degree of source separation leading to various recovery products. Separate vacuum collection and transport followed by anaerobic treatment of concentrated black water (BW) demonstrated on a scale of 32 houses preserve 7.6 g/N/p/d and 0.63 gP/p/d amounting to respectively 69 and 48% of the theoretically produced N and P in the household, and 95% of the retained P was shown to be recoverable via struvite precipitation. Reuse of the anaerobic sludge in agriculture can substantially increase the P recovery. Energy recovery in the form of biogas from anaerobic digestion of concentrated BW, fits well in new concepts of sustainable, zero energy buildings. Nutrient recovery from separately collected urine lowers the percentage of nutrient recovery in comparison with BW but can, on the other hand, often be implemented in existing sanitation concepts. Theoretically 11gN/p/d and 1.0 g P/p/d are produced with urine, of which 38-63 and 34-61% were recovered in practice on a scale of 8-160 inhabitants in Sweden. New sanitation concepts with resource recovery and reuse are being demonstrated worldwide and more and more experience is being gained.     

Single point incremental forming: state-of-the-art and prospects

Incremental sheet metal forming in general and Single Point Incremental Forming (SPIF) specifically have gone through a period of intensive development with growing attention from research institutes worldwide. The result of these efforts is significant progress in the understanding of the underlying forming mechanisms and opportunities as well as limitations associated with this category of flexible forming processes. Furthermore, creative process design efforts have enhanced the process capabilities and process planning methods. Also, simulation capabilities have evolved substantially. This review paper aims to provide an overview of the body of knowledge with respect to Single Point Incremental Forming. Without claiming to be exhaustive, each section aims for an up-to-date state-of-the-art review with corresponding conclusions on scientific progress and outlook on expected further developments.     

The effect of phone design on upper extremity discomfort and muscle fatigue

OBJECTIVE: To compare a small cellular clamshell phone with a traditional office phone in the development of discomfort and muscle fatigue over time during phone use. BACKGROUND: Phone use involves low-level static exertions that may be influenced by phone design. Phone design and its interactions with anthropometry may change shoulder and hand postures assumed during use, which in turn may modify the length-strength relationship and moment arms of the muscles. METHOD: Ten adults participated in a study that simulated phone use using a small clamshell and a traditional office phone. Discomfort information and electromyographic (EMG) muscle activity were monitored on four upper extremity muscles. Discomfort and fatigue data (EMG median frequency shifts) were analyzed to assess differences between phones as well as differing effects attributable to anthropometry. RESULTS: Median frequency shifts supported discomfort claims and indicated muscle fatigue in the deltoid and thenar muscles. Biomechanical measures demonstrated that participants with short limb lengths developed more severe signs of thenar fatigue. Participants with longer arms developed greater discomfort in the neck, shoulder, and back. The deltoid confirmed this occurrence, showing signs of muscle fatigue. CONCLUSION: Phone design and anthropometry influenced the development of discomfort and fatigue during phone use. Phone design dictated grip style, resulting in differing discomfort and fatigue levels. Anthropometry influenced the severity of the discomfort and fatigue present in the shoulder and hand. APPLICATION: Use of small clamshell phones may contribute to a lack of rest and recovery from typical workday exposures. It should be explored from an ergonomic perspective.     

The influence of lift frequency, lift duration and work experience on discomfort reporting

Discomfort surveys are commonly used to assess risk in the workplace and prioritize jobs for interventions before an injury or illness occurs. However, discomfort is a subjective measure and the relationship of discomfort to work-related factors is poorly understood. The objective of this study was to understand how reports of discomfort relate to work-related risk factors for the low back. A total of 12 novice and 12 experienced manual materials handlers performed repetitive, asymmetric lifts at different load levels and at six different lift frequencies throughout an 8-h exposure period. Discomfort was recorded hourly throughout the day. Analyses were performed to determine which experimental factors influenced reporting of discomfort and if discomfort trends matched spine loading trends. Novice lifters reported significantly higher discomfort levels than experienced subjects. They also reported increases in discomfort as moment exposure increased and as the exposure time increased. Novices lifting at 8 Nm load moment level reported increased discomfort from 0.07 to 0.63 by the end of the day, at 36 Nm they reported an increase from 0.04 to 0.40 and at 85 Nm they reported an increase from 0.37 to 3.06. Experienced subjects, on the other hand, reported low levels of discomfort regardless of moment exposure, lift frequency or exposure duration. The reported discomforts were generally unrelated to the biomechanical loading on the spine. Discomfort reporting appears to be more a reflection of experience than of work risk factor exposure. Experienced subjects may have more efficient motor patterns, which reduce spinal load and thus discomfort. Novice subjects seemed to have a lower threshold of discomfort. Caution is needed when using discomfort reporting as a means to identify jobs in need of interventions, in that biomechanical loading may not be accurately represented. Discomfort should only be used as a supplement to objective measures, such as spinal loading, to assess the risk of low back disorders.     

Isothermal and Dynamic Microcalorimetry for Quantifying the Crystallization of an Amorphous Drug during Interactive Powder Mixing

This study reports the crystallization of amorphous nifedipine during an interactive mixing process quantified by using isothermal and dynamic microcalorimetry. Interactive mixtures of amorphous nifedipine and uniform glass beads were prepared by mixing in a Turbula® mixer. The difference in the extent of crystallization of amorphous nifedipine during mixing was characterized by the time it took for the crystallization of a known amount of amorphous nifedipine in isothermal calorimetry and the change in the height of the crystallization peak at 65°C in dynamic calorimetry. It was found that both isothermal and dynamic microcalorimetry are useful techniques for quantifying the physical transition of amorphous nifedipine during interactive mixing. The rate and extent of crystallization of amorphous nifedipine depended on both mixing time and speed, but mixing time played a more dominant role because the transformation of amorphous to crystalline nifedipine was greater after 3180 revolutions (9.7%) than after 405 revolutions (0.9%) at 27 rpm. The same trend was observed at 109 rpm, but the percentage of crystalline nifedipine after 3180 revolutions was only 5.2%. This meant that an increase in mixing time rather than speed increased the rate of amorphous to crystalline transformation. The greatest cause for crystal transformation during interactive mixing was the presence of crystal seeds of the thermodynamically stable nifedipine Modification I because the amount of amorphous to crystalline transformation increased from 2.6% for a completely amorphous mixture to 6.6% for a 92:8 mixture of amorphous and crystalline nifedipine when mixed for 30 minutes at 106 rpm.