Recent Advances in Boron Nitride Based Hybrid Polymer Nanocomposites

Boron nitride (BN) is an eminent inorganic compound having many interesting characteristics such as improved oxidation resistance, mechanical strength, good thermal conductivity (TC), higher bandgap, high chemical stability, thermal stability, high hydrophobicity, and electrical insulation. The use of BN as a filler in polymers is a well-established strategy to tailor the properties of polymer composites. Recent studies depict an interesting urge to reap the synergistic effect of various nanofillers with BN in the form of hybrids. Hence the consolidation of the works on BN based hybrid fillers would definitely attract researchers so that these new filler systems could be transformed into useful polymer nanocomposites in future. This review article focuses on the synthesis and characterization of various boron nitride based hybrids in detail. Moreover, the review also throws light on different BN hybrid reinforced polymer nanocomposites (PNCs) and their thermal, electrical, electronic as well as biomedical applications in a detailed manner. Thus the review anticipates serving as a tool toward understanding the recent trends in the field of boron nitride hybrid based ternary polymer composites.     

Differential response of glaciers with varying debris cover extent: evidence from changing glacier parameters

Supraglacial debris (SGD) cover on mountain glaciers is known to greatly influence various glacier processes and alter their response to climate change. In this study, vital glacier parameters of five glaciers with varying debris coverage (about 7–26%), located in Zanskar basin, Ladakh Himalaya, were monitored using Landsat imagery (from 1977 to 2013) and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) global digital elevation model (GDEM). Results reveal how varying amounts of SGD induce categorically distinct responses on glaciers, sharing same geographical settings. The clean glaciers (CG) in the area were found to have higher retreat rates (about 8–19 m year^?1), comparable areal shrinkage (about 13–15%), higher accumulation area ratios (AARs) (>0.5), rapid increase in SGD (about 1.6–3.0-fold), and association with increasing numbers of peri- and proglacial lakes (2–8 per glacier). The debris-covered glaciers (DCG) showed minimal frontal changes (about 2–5 m year^?1), higher areal shrinkage (about 14–21%), low AARs (<0.5), slow SGD changes (about ≤1.2-fold), and association with increasing numbers of peri- and supraglacial lakes (SGLs) (2–39 per glacier). Moreover, while changes in SGD had a strong negative correlation with changes in glacier area, retreat rates, and AAR, they were positively related with increase in area of SGLs.     

Optimization of substrates for Bioelectricity production by Ochrobactrum pseudintermedium KF026284 in a single chambered microbial fuel cell

A new strain of bacterium Ochrobactrum pseudintermedium KF026284 was isolated from a single chambered microbial fuel cell operated with rumen fluid. The bacterium produced maximum power density of 114 mW/m² (0.7 V, 0.6 mA) when nutrient broth was used as the growth medium. The optimization of electricity generation by O. pseudintermedium KF026284 was carried out using various substrates like cellulose, cellobiose, starch, sucrose, and glucose. The bacterium when fed with cellobiose showed an appreciable and sustainable electricity generation with a power density of 150 mW/m² from the 5th day and a maximum power density of 247 mW/m² on the 11th day.     

Design optimization of deep groove ball bearings using crowding distance particle swarm optimization

This paper presents a crowding distance particle swarm optimization technique to optimize the design parameters of deep groove ball bearings. The design optimization problem is multi-objective in nature. The considered objectives are maximizing dynamic and static load bearing capacities and minimizing elasto-hydrodynamic film thickness. The technique is applied to bearings used in transmission system of a tractor for the purpose of farming. Pareto optimal solutions are obtained using the proposed technique. The results obtained from the technique are found to be superior compared with NSGA-II and catalogue values.     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Enhanced Phase Stability and Photoluminescence of Eu3+ Modified t-ZrO2 Nanoparticles

Tetragonal ( t ) ZrO₂ nanoparticles have been obtained by a partial Eu³⁺→Zr⁴⁺ substitution, synthesized using a simple oxalate method at a moderate temperature of 650°C in air. The Eu³⁺ additive, 2 mol% used according to the optimal photoluminescence (PL), gives small crystallites of the sample. On raising the temperature further, the average crystallite size D grows slowly from 16 nm to a value as big as 49 nm at 1200°C. The Eu³⁺: t -ZrO₂ nanoparticles have a wide PL spectrum at room temperature in the visible to near-IR regions (550–730 nm) in the ⁵D₀→⁷F_J (Eu³⁺), J =1–4, electronic transitions. The intensity of the ⁵D₀→⁷F₄ group is as large as that of the characteristic ⁵D₀→⁷F₂ group of the spectrum in the forced electric-dipole allowed transitions. The enhanced t -ZrO₂ phase stability and wide PL can be attributed to the combined effects of an amorphous Eu³⁺-rich surface and part of the Eu³⁺ doping of ZrO₂ of small crystallites.     

Occurrence and characterization of carbon nanoparticles below the soot laden zone of a partially premixed flame

An experimental study has been performed to detect the occurrence of nanosized carbon particulates below the soot laden zone of a co-flowing partially premixed flame. Samples have been extracted from different points across the flame and passed through DI water. Absorption and fluorescence spectroscopies have been performed with the collected water suspensions. The occurrence of carbon nanoparticles is evident across the inner flame front. In addition, evidence of naphthalene has also been found inside the inner rich premixed flame. The concentration of naphthalene decreases while that of the carbon nanoparticles increases as the inner flame front is reached. The stability of the nanoparticles in the sample has been ensured by observing that the change in fluorescence quantum yield from the sample over a long duration is small. The band gap energy has been evaluated using the absorption data to characterize the likely structures of the particles in the collected suspension. Two kinds of particles having different zones of band gap energy are found in the flame. Dynamic light scattering measurements show that the particle size grows with the increase in height in the lower part of the flame. While, at 3 and 6 mm elevations the particles are observed to be below 2.5 nm in diameter, the particles at 10 mm elevation are found in the size range of 2.5-5.5 nm.