Crystallization of amorphous Ni60 Nb40−x Cr x alloys

Crystallization behaviour of amorphous Ni₆₀ Nb_40-x Cr _x (x = 0, 5, 10 and 13 at%) alloys was studied by differential Scanning calorimetry and X-ray diffraction measurements. It is shown that the addition of chromium reduces the crystallization temperature, stages of crystallization and activation energies associated with the crystallization sages of the Ni₆₀Nb₄₀ glass. Crystallization of the Ni₆₀Nb₄₀ glass occurred in three stages; in the initial stage a metastable M-phase formed in the amorphous matrix as reported earlier [1] . However, contrary to earlier observation [1], M -phase was not very stable and transformed together with some amorphous phase to the equilibrium Ni₃Nb phase in the second stage of crystallization. In the third stage, the remaining amorphous matrix transformed to the equilibrium NiNb phase. On addition of chromium the formation/stability of the M-phase was found to be suppressed and equilibrium NbCr₂ phase precipitated preferentially in the first stage. The second stage, corresponding to the formation of Ni₃Nb phase, remained almost unaltered. The third stage corresponding to the crystallization of NiNb phase disappeared completely at 13 at% Cr. In the fully crystallized samples the proportion of the NiNb phase decreased and that of NbCr₂ phase increased continuously with chromium concentration.     

The coating of cadmium compounds with copper compounds

Fine particles of cadmium carbonate (CdCO₃) were prepared by heating aqueous solutions containing dissolved urea and cadmium sulfate at 85°C for 1 h. Effect of the composition of the reactant mixture on the morphology of the precipitated particles was investigated. It was found that the cadmium sulfate content of the reactant mixture significantly affected the shape and size of the precipitated particles. At certain range of reactant mixture composition, cauliflower-shaped uniform particles were obtained. The later particles were coated with basic copper carbonate (Cu₂(OH)₂CO₃) by heating aqueous dispersions, containing CdCO₃ particles, copper (II) nitrate, and urea at 85°C for various periods of time with constant stirring. The coating process was found sensitive to the experimental conditions and in most of the trials; mixtures of the coated and coating precursor particles were obtained. As such, extensive optimizations were carried out and conditions were established for the production of uniformly coated particles.On calcination at 700°C for 1 h, the CdCO₃ particles converted into CdO, whereas the coated particles (CdCO_{3 (core)}/Cu₂(OH)₂CO_{3 (coating)} transformed into CdO_(core)/CuO_(coating)) without sintering. In the coated particles, the core and coating materials stayed mutually inert during the calcination reaction and independently converted into their respective oxides.All the calcined and uncalcined products were characterized by various physical and chemical methods.     

Lyapunov‐stable discrete‐time model reference adaptive control

Discrete‐time model reference adaptive control (MRAC) is considered with both least squares and projection algorithm parameter identification. For both cases complete Lyapunov proofs are given for stability and convergence. The results extend the approach of Johansson (Int. J. Control 1989; 50 (3):859–869) to include Lyapunov stability for MRAC when the normalized projection algorithm is used for parameter identification. Copyright © 2005 John Wiley & Sons, Ltd.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Tensile behavior change depending on the varying tungsten content of W–Ni–Fe alloys

Tungsten heavy alloys (WHAs) are metal–metal composites consisting of nearly pure spherical tungsten particles embedded in a Ni–Fe–W or Ni–Co–W or Ni–Cu–W ductile matrix. In this dual phase alloy, there are several complicated relations between the ductile matrix and hard tungsten particles. The aim of this research was to examine the effect of varying tungsten content on the microstructure and mechanical properties of tungsten heavy alloys. The microstructural parameters (grain size, connectivity, contiguity and solid volume fraction) were measured and were found to have a significant effect on the mechanical properties of tungsten-based heavy alloys. The result shows that the binding strength between the W and the matrix phase has a major influence on the ductility of tungsten-based alloys. The larger this binding force is, the better the ductility is.     

A new method for fast anodic bonding in microsystem technology

Other than temperature and voltage, load plays a key role in anodic bonding process. In this paper we present a new design of top electrode (cathode) for anodic bonding machine by which the bonding time has been reduced up to 30 % in case of bare silicon wafer at ?400 V and approximate 52 % in case of oxidized silicon wafer with Pyrex glass bonding at ?800 V. Experimentally it has been observed there was no bonding in oxidized silicon wafer with Pyrex glass up to ?600 V by using standard design while it has been successfully bonded at same voltage (?600 V) by using new design.     

基于微生物和纳米TiO2的双负载 核壳水凝胶的制备和性能

摘要：设计了能同时利用微生物和光催化剂，分步逐级降解有机污染物的多功能双负载核壳水凝胶，核为聚乙烯醇（PVA）和羟乙基纤维素（HEC）包覆酵母菌（YE），壳为海藻酸钠（SA）和钙离子（Ca2+）负载纳米二氧化钛（TiO2 NPs）。采用SEM观察形貌可知，核壳结构清晰可辩，显微镜照片和荧光标记照片证明了核中YE的存在，XRD分析结果证明了壳中TiO2 NPs的负载，同时FTIR、XPS验证了核壳结构的分子间存在着相互作用力。并且在不同负载量下，研究了核壳水凝胶对亚甲基蓝（MB）染料去除的分步降解效果，壳中TiO2 NPs负载量越高，对MB的降解最高，可达96.65%； YE负载量的增加而MB的降解率先增大后减小，最高可达92.15%。在循环降解4次后，对MB染料的降解率仍有68.97%。本研究为分步多次降解多种有机污染物，提供并拓展了研究思路和新方法。     

Development of Si3Na/Al composite by pressureless melt infiltration

Pressureless infiltration process to synthesize Si3N4/Al composite was investigated. Al-2%Mg alloy was infiltrated into Si3N4 and Si3N4 containing 10% Al2O3 preforms in the atmosphere of nitrogen. It is possible to infiltrate Al-2%Mg alloy in Si3N4 and Si3N4 containing 10% Al2O3 preforms. The growth of the dense composite of useful thickness was facilitated by the presence of magnesium powder at the interface and by flowing nitrogen. During infiltration Si3N4 reacted with aluminium to form Si and AIN, the growth of composite was found to proceed in two ways, depending on the Al2O3 content in the initial preform. Firstly, preform without Al2O3 content gives rise to AIN, Al3.27Si0.47 and Al type phases after infiltration. Secondly, perform with 10% Al2O3 content gives rise to AIN-Al2O3 solid solution phase （AION）, MgAl2O4, Al and Si type phases. AlON phase was only present in composite, containing 10% Al2O3 in the Si3N4 preforms before infiltration.     

Behavior of residual carbon in Sm(Co, Fe, Cu, Zr)z permanent magnets

When sintered Sm(Co, Fe, Cu, Zr)_z permanent magnets are prepared by metal injection molding, some organic binders are added in alloy powder, which leads to much residual carbon in the magnets. The residual carbon decreases magnetic properties and destroys the microstructure of the magnets. In this paper, the behavior of carbon in Sm(Co, Fe, Cu, Zr)_z permanent magnets has been studied. The results indicate that Sm(Co, Fe, Cu, Zr)_z magnets can keep excellent magnetic properties when the carbon content is below 0.1 wt.%: Br ≥ 10 kGs, H_cj ≥ 22 kOe, BH_max ≥ 25 MGOe. When the carbon content is above 0.1 wt.%, Br, H_cj and BH_max decrease with increasing carbon content evidently. Carbon consumes Zr content and forms ZrC, which reduces the volume fraction of the lamella and Sm(Co, Cu)₅ phases. Thus, the cell size increases and the cellular microstructure deteriorates. When the carbon content reaches 0.43 wt.%, there is not enough Sm(Co, Cu)₅ phase to form a uniform cellular microstructure. Br, H_cj and BH_max are approximate to zero. Since carbon has little influence on the content of Sm₂(Co, Fe)₁₇ phase, Ms can keep a high value (≥100 emu/g). ZrC has high melting point (3420 °C) and acts as dispersion particle in the magnets, which prevents the grains of SEM structure growing and reduces the liquid content of green compacts during sintering. Therefore, the density of the magnets decreases.