Tuning of shear thickening behavior and elastic strength of polyvinylidene fluoride via doping of ZnO-graphene

ZnO rice like nonarchitects are grafted on the graphene carbon core via a rapid microwave synthesis route. The prepared grafted systems are characterized via XRD, SEM, RAMAN, and XPS to examined the structural and morphological parameters. Zinc oxide grafted graphene sheets (ZnO-G) are further doped in β-phase of polyvinylidene fluoride (PVDF) to prepare the polymer nanocomposites (PNCs) via mixed solvent approach (THF/DMF). β-phase confirmation of PVDF PNCs is done by FTIR studies. It is observed that ZnO-G filler enhances the β-phase content in the PNCs. Non-doped PVDF and PNCs are further studied for rheological behavior under the shear rate of 1–100 s⁻¹. Doping of ZnO-G dopant to the PVDF matrix changes its discontinuous shear thickening (DST) behavior to continues shear thickening behavior (CST). Hydrocluster formation and their interaction with the dopant could be the reason for this striking DST to CST behavioral change. Strain amplitude sweep (10⁻³% -10%) oscillatory test reveals that the PNCs shows extended linear viscoelastic region with high elastic modulus and lower viscous modulus. Effective shear thickening behavior and strong elastic strength of these PNCs present their candidature for various fields including mechanical and soft body armor applications.     

Sensitivity Analysis of Calibration Methods and Factors Effecting the Statistical Nature of Radiation Measurement

The scintillator detectors are recalibrated against the datasheet given by the manufacturer. Optimal and mutual dependent values of (a) high voltage at PMT (Photomultiplier Tube), (b) amplifier gain, (c) average time to count the radiation particles (set by operator), and (d) number of instances/sample number are estimated. Total 5: two versions of Central Limit Theorem (CLT), (3) industry preferred Pulse Width Saturation, (4) calibration based on MPPC coupled Gamma-ray detector, and (5) gross method are used. It is shown that the CLT method is the most optimal method to calibrate the detector and its respective electronics couple. An inverse modeling-based Computerized Tomography method is used for verification. It is shown that statistically averaging results are more accurate and precise data than mode and median if the data is not skewed and a random number of samples are used during the calibration process. It is also shown that the average time to count the radiation particle is the most important parameter affecting the optimal calibration setting for precision and accurate measurements of gamma radiation.

     

On Ultra-Fine Leak Detection of Hermetic Wafer Level Packages

Theoretical and practical ranges of leak rates measurable by the helium mass spectrometer are characterized. The effect of noise due to: 1) background helium present in the spectrometer and 2) desorption of helium that attaches itself to the specimen surface during bombing is quantified experimentally. The results guide a framework to extract the true leak rate from the measured leak rate profile. An optical interferometry based hermeticity measurement technique for ultra-fine leaks is proposed. The setup to implement the technique is described and a preliminary experimental result is reported.     

Nonlinear electrical transport in K-TCNQ at low temperatures

A remarkable nonlinearity has been observed for electric transport in K-TCNQ (potassium tetracyanoquinodimethane) quasi-one-dimensional conductor. The negative differential resistance region appears afterV _m (turn over voltage), beyond which voltage goes down with increase of current. A possible mechanism is discussed in terms of dynamics of charged solitons and domain walls in one-dimensional molecular stacks of these types of crystals.     

Ergonomics in sickle operation

Sickle operation in harvesting has been analysed with reference to design features of nine different types of sickles, and field and laboratory based investigations on biomechanical stresses and physiological valuation on six farmers. It has been indicated that the blade geometry contributes significantly to human performance and there is ample scope for further design optimisation. The suggested modifications are: (i) sickle weight - 200 g; (ii) total length of sickle - 33 cm; (iii) handle length - 11 cm; (iv) handle diameter - 3 c cm; (v) radius of blade curvature - 15 cm; (vi) blade concavity - 5 cm; (vii) serrated sickle: tooth pitch - 0.20 cm and tooth angle - 60 degrees; (viii) ratio of the length of cutting surface to chord length - 1.20.     

Two-echelon fuzzy stochastic supply chain for the manufacturer–buyer integrated production–inventory system

This paper deals with two-echelon integrated procurement production model for the manufacturer and the buyer integrated inventory system. The manufacturer procures raw material from outside suppliers (not a part of supply chain) then proceed to convert it as finished product, and finally delivers to the buyer, who faces imprecise and uncertain, called fuzzy random demand of customers. The manufacturer and the buyer work under joint channel, in which a centralized decision maker makes all decisions to optimize the joint total relevant cost (JTRC) of entire supply chain. In this account, in one production cycle of the manufacturer we determine an optimal multi-ordering policy for the buyer. To be part of this, we first derive the JTRC in stochastic framework, and then extend it in fuzzy stochastic environment. In order to scalarize the fuzzy stochastic JTRC, we use an evaluation method wherein randomness is estimated by probabilistic expectation and fuzziness is estimated by possibilistic mean based on possibility evaluation measure. To derive the optimal policies for both parties, an algorithm is proposed. A numerical illustration addresses the situations of paddy procurement, conversion to rice and fulfillment of uncertain demand of rice. Furthermore, sensitivity of parameters is examined to illustrate the model and algorithm.     

Scalable nonlinear dynamical systems for agent steering and crowd simulation

We present a new methodology for agent modeling that is scalable and efficient. It is based on the integration of nonlinear dynamical systems and kinetic data structures. The method consists of three layers, which together model 3D agent steering, crowds and flocks among moving and static obstacles. The first layer, the local layer employs nonlinear dynamical systems theory to models low-level behaviors. It is fast and efficient, and it does not depend on the total number of agents in the environment. This dynamical systems-based approach also allows us to establish continuous numerical parameters for modifying each agent's behavior. The second layer, a global environment layer consists of a specifically designed kinetic data structure to track efficiently the immediate environment of each agent and know which obstacles/agents are near or visible to the given agent. This layer reduces the complexity in the local layer. In the third layer, a global planning layer, the problem of target tracking is generalized in a way that allows navigation in maze-like terrains, avoidance of local minima and cooperation between agents. We implement this layer based on two approaches that are suitable for different applications: One approach is to track the closest single moving or static target; the second is to use a pre-specified vector field, which may be generated automatically (with harmonic functions, for example) or based on user input to achieve the desired output. We also discuss how hybrid systems concepts for global planning can capitalize on both our layered approach and the continuous, reactive nature of our agent steering.

We demonstrate the power of the approach through a series of experiments simulating single/multiple agents and crowds moving towards moving/static targets in complex environments.     

A Gravitational Search Algorithm Based Static VAR Compensator Switching Function Optimization Technique for Minimum Harmonic Injection

Switching function optimization for minimum source harmonic injection for a static VAR compensator is presented. The static VAR compensator is configured with a fixed capacitor and insulated-gate bipolar transistor controlled reactor. The switching function is optimized for minimum source harmonic injection considering the desired fundamental voltage across load terminals. A gravitational search algorithm is employed for this purpose. It is observed that the proposed switching scheme with two different switching angles per half-cycle provides lower source harmonic injection compared to conventional switching, hence improving the source current harmonics. The switching angles are computed off-line using the gravitational search algorithm for varying modulation indices considering the minimum total harmonic distortion of the reactor voltage. The switching angles are stored in a processor as a function of the modulation index for on-line application using a piecewise mixed model approximation technique for low memory usage. It is observed that the proposed switching improves the source current total harmonic distortion on an average of 4 to 5% over most of the operating range compared to conventional switching without optimization. Various simulation and experimental results are presented on different loads to validate the proposed concept.     

Antioxidant effect of turmeric powder,nitrite and ascorbic acid on stored chicken mince

This investigation was carried out to evaluate the antioxidant effect of turmeric (turmeric 1000 ppm, turmeric 5000 ppm), nitrite (nitrite 200 ppm) and ascorbic acid (ascorbic acid 500 ppm) on raw minced chicken stored at 4 ± 1 °C. Physicochemical properties [pH, water activity, cooking loss, thiobarbituric acid (TBA) value, peroxide value (PV), free fatty acid (FFA)] were evaluated on 0, 2, 4 and 6th day of storage. Highly significant differences (P < 0.01) in pH, TBA value, PV and FFA value were noticed between treatments and between storage periods. TBA values were observed to be lowest for nitrite 200 ppm and then turmeric 5000 ppm, and there was no significant difference between nitrite 200 ppm and turmeric 5000 ppm, and both were superior to ascorbic acid 500 ppm and turmeric 1000 ppm. Among different treatments, PV was found to be lowest in turmeric 5000 ppm and highest in nitrite 200 ppm. FFA value was found to be lowest in turmeric 5000 ppm and highest in ascorbic acid 500 ppm among all treated samples. It can be concluded that turmeric has potential to replace synthetic antioxidants presently used in meat processing with many added advantages.