Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina

Porous alumina with a highly textured microstructure was fabricated by pulse electric current sintering (PECS) using alumina platelets. Highly oriented porous alumina with a porosity of 3%–50% was obtained by a pressure-controlled method of PECS. The properties of the highly textured porous alumina were measured in two directions. The nitrogen gas permeance and thermal conductivity at room temperature were higher in the direction along the platelet length due to the higher continuity of pores and the connectivity of alumina platelets, respectively. The anisotropy of the thermal conductivity at room temperature was investigated and explained by the effect of grain size of platelets as well as morphology and orientation of pores. The bending strength was higher with the loading direction along the platelet thickness. The thermal shock strength was clearly different in the two directions. The difference in the thermal shock strength was investigated by the measurement of properties and thermal stress analysis.     

Aqueous One-pot Synthesis of Glycopolymers by Glycosidase-catalyzed Glycomonomer Synthesis Using 4,6-Dimetoxy Triazinyl Glycoside Followed by Radical Polymerization

Glycopolymers have attracted increased attention as functional polymeric materials, and simple methods for synthesizing glycopolymers remain needed. This paper reports the aqueous one-pot and chemoenzymatic synthesis of four types of glycopolymers via two reactions: the β-galactosidase-catalyzed glycomonomer synthesis using 4,6-dimetoxy triazinyl β-D-galactopyranoside and hydroxy group-containing (meth)acrylamide and (meth)acrylate derivatives as the activated glycosyl donor substrate and as the glycomonomer precursors, respectively, followed by radical copolymerization of the resulting glycomonomer and excess glycomonomer precursor without isolating the glycomonomers. The resulting glycopolymers bearing galactose moieties exhibited specific and strong interactions with the lectin peanut agglutinin as glycoclusters.     

Serum Amyloid A3 Promoter-Driven Luciferase Activity Enables Visualization of Diabetic Kidney Disease

The early detection of diabetic nephropathy (DN) in mice is necessary for the development of drugs and functional foods. The purpose of this study was to identify genes that are significantly upregulated in the early stage of DN progression and develop a novel model to non-invasively monitor disease progression within living animals using in vivo imaging technology. Streptozotocin (STZ) treatment has been widely used as a DN model; however, it also exhibits direct cytotoxicity to the kidneys. As it is important to distinguish between DN-related and STZ-induced nephropathy, in this study, we compared renal responses induced by the diabetic milieu with two types of STZ models: multiple low-dose STZ injections with a high-fat diet and two moderate-dose STZ injections to induce DN. We found 221 genes whose expression was significantly altered during DN development in both models and identified serum amyloid A3 (Saa3) as a candidate gene. Next, we applied the Saa3 promoter-driven luciferase reporter (Saa3-promoter luc mice) to these two STZ models and performed in vivo bioluminescent imaging to monitor the progression of renal pathology. In this study, to further exclude the possibility that the in vivo bioluminescence signal is related to renal cytotoxicity by STZ treatment, we injected insulin into Saa3-promoter luc mice and showed that insulin treatment could downregulate renal inflammatory responses with a decreased signal intensity of in vivo bioluminescence imaging. These results strongly suggest that Saa3 promoter activity is a potent non-invasive indicator that can be used to monitor DN progression and explore therapeutic agents and functional foods.     

Polymer-derived β-SiAlON:Eu2+ phosphors

A series of β-SiAlON:Eu²⁺ phosphors were synthesized from single-source precursors, perhydropolysilazane chemically modified with Al(OCH(CH₃)₂)₃, AlCl₃, and EuCl₂. The single-source precursors were converted to β-SiAlON:Eu²⁺ phosphors by pyrolysis under flowing N₂ or NH₃ at 1000°C, followed by heat treatment at 1800°C under an N₂ gas pressure at 980 kPa. By varying the molar ratio of the chemical modifiers, β-SiAlON:Eu²⁺ with the compositions close to the theoretical ones expressed as Si_6−zAl_zO_z−2yN_8−z+2y:yEu²⁺ were synthesized, where the z values and Eu²⁺ contents were controlled in the ranges of .44–.78 and .35–1.48 mol%, respectively. The polymer-derived β-SiAlON:Eu²⁺ phosphors exhibited green emission under excitation at 460 nm attributed to the 4f⁷–4f⁶(7f³)5d¹ transition of dopant Eu²⁺. High-angle annular dark-field-scanning transmission microscopy analysis confirmed that the doped-Eu²⁺ existed interstitially within the channels along the c axis of host β-SiAlON. Compared with the conventional powder metallurgy route, the polymer-derived ceramic route in this study offers some advantages in the grain growth of host β-SiAlON and photoluminescence properties in terms of green emission intensity under excitation at 460 nm, and the highest intensity was achieved for the polymer-derived β-SiAlON:Eu²⁺ with z = .64 and .37 mol% Eu²⁺.     

Kinetic analysis of crystallization of zeolite beta synthesized by direct heating

To quantitatively investigate the initial crystallization of zeolite beta synthesized by direct heating, the extent of the reaction was precisely evaluated by X-ray diffraction measurements and Rietveld structural refinement, and a kinetic analysis of crystallization was performed using the Avrami-Erofe'ev equation. The activation energy for crystallization was lower than that for hydrothermal synthesis. Reaction and synthesis time curves revealed that the initial zeolite beta crystallization consisted of three stages. The first was an induction period with nucleation by the generation of building units and the formation of an initial coordinated structure. The second stage was crystal growth by a diffusion-controlled reaction, and the third stage involved slowing down of crystallization by the limitation of dehydrocondensation. These stages could be analyzed by calculation of the rate constant and Avrami exponent for each stage.     

Investigation on the Interactions between Self-Assembled β-Sheet Peptide Nanofibers and Model Cell Membranes

Self-assembled peptide nanofibers (NFs) obtained from β-sheet peptides conjugated with drugs, including antigenic peptides, have recently attracted significant attention. However, extensive studies on the interactions of β-sheet peptide NFs with model cell membranes have not been reported. In this study, we investigated the interactions between three types of NFs, composed of PEG-peptide conjugates with different ethylene glycol (EG) lengths (6-, 12- and 24-mer), and dipalmitoylphosphatidylcholine (DPPC) Langmuir membranes. When increasing the EG chain length, those interactions significantly decreased considering measurements in the presence of the NFs of: (i) changes in surface pressure of the DPPC Langmuir monolayers and (ii) surface pressure–area (π–A) compression isotherms of DPPC. Because the observed trend was similar to the EG length dependency with regard to cellular association and cytotoxicity of the NFs that was reported previously, the interaction of NFs with phospholipid membranes represented a crucial factor to determine the cellular association and toxicity of the NFs. In contrast to NFs, no changes were observed with varying EG chain length on the interaction of the building block peptide with the DPPC membrane. The results obtained herein can provide a design guideline on the formulation of β-sheet peptide NFs, which may broaden its potential.     

6-Azauridine Induces Autophagy-Mediated Cell Death via a p53- and AMPK-Dependent Pathway

6-Azauridine (6-AZA), a pyrimidine nucleoside analogue, is known to exhibit both antitumor and antiviral activities. Although 6-AZA was discovered more than 60 years ago, the cellular effects of this compound are yet to be elucidated. Here, we report that 6-AZA regulates autophagy-mediated cell death in various human cancer cells, where 6-AZA treatment activates autophagic flux through the activation of lysosomal function. Furthermore, 6-AZA exhibited cytotoxicity in all cancer cells studied, although the mechanisms of action were diverse. In H460 cells, 6-AZA treatment induced apoptosis, and the extent of the latter could be reduced by treatment with chloroquine (CQ), a lysosomal inhibitor. However, 6-AZA treatment resulted in cell cycle arrest in H1299 cells, which could not be reversed by CQ. The cytotoxicity associated with 6-AZA treatment could be linearly correlated to the degree of autophagy-mediated cell death. In addition, we demonstrated that the cytotoxic effect of 6-AZA was dependent on AMPK and p53. These results collectively indicate that autophagy-mediated cell death triggered by 6-AZA contributes to its antitumor effect.     

Characterization of porous alumina bodies fabricated by high-temperature evaporation of boric acid with sodium impurity

For steel-making refractories, porous alumina bodies fabricated by the evaporation of chemical impurities at high temperatures was studied. Boron hydroxide and sodium carbonate were added in different proportions as impurities into the starting aluminum hydroxide powder compacts, which were heated at various temperatures for 1 h to form porous alumina bodies. During heating, the borate compounds that reacted with sodium seems to be formed in the liquid phase, so that all alumina particles were able to grow into platelets. Although the sodium inside the compacts was completely evaporated by 1400 °C, the boron melt was maintained above 1400 °C. Hence, alumina platelets grew with a card-house structure, which preserved the high porosity of the alumina body. After heating at 1600 °C for 1 h, the remaining boron oxide was completely evaporated and sintering between the alumina particles began to decrease the porosity. The compressive strength and porosity of the alumina bodies obtained by heating at 1700 °C for 1 h were 0.8 MPa and 64%, respectively. It is expected that the resulting porous alumina bodies can be used as castable porous clinkers.     

Formation mechanism of Ti2AlC under the self-propagating high-temperature synthesis (SHS) mode

Ti₂AlC was fabricated by the self-propagating high-temperature synthesis (SHS) technique from a compacted powder mixture consisting of Ti:Al:C = 2:1:1 (molar ratio) of mortar mixing, planetary mixing and various packing densities. A thermocouple was placed directly into the green compact body in order to monitor the combustion temperature during the SHS process. When the green compact with planetary mixing treatment and a packing density of 17% as well as 60% was used, propagation of the reaction exothermicity could occur, and the starting compact completely changed to Ti₂AlC. Formation mechanism of Ti₂AlC using a SHS technique was discussed. In addition, the melting point of the resultant sample was determined to be 1570 °C.