Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

Studying high impact fix-inducing changes

As software systems continue to play an important role in our daily lives, their quality is of paramount importance. Therefore, a plethora of prior research has focused on predicting components of software that are defect-prone. One aspect of this research focuses on predicting software changes that are fix-inducing. Although the prior research on fix-inducing changes has many advantages in terms of highly accurate results, it has one main drawback: It gives the same level of impact to all fix-inducing changes. We argue that treating all fix-inducing changes the same is not ideal, since a small typo in a change is easier to address by a developer than a thread synchronization issue. Therefore, in this paper, we study high impact fix-inducing changes (HIFCs). Since the impact of a change can be measured in different ways, we first propose a measure of impact of the fix-inducing changes, which takes into account the implementation work that needs to be done by developers in later (fixing) changes. Our measure of impact for a fix-inducing change uses the amount of churn, the number of files and the number of subsystems modified by developers during an associated fix of the fix-inducing change. We perform our study using six large open source projects to build specialized models that identify HIFCs, determine the best indicators of HIFCs and examine the benefits of prioritizing HIFCs. Using change factors, we are able to predict 56 % to 77 % of HIFCs with an average false alarm (misclassification) rate of 16 %. We find that the lines of code added, the number of developers who worked on a change, and the number of prior modifications on the files modified during a change are the best indicators of HIFCs. Lastly, we observe that a specialized model for HIFCs can provide inspection effort savings of 4 % over the state-of-the-art models. We believe our results would help practitioners prioritize their efforts towards the most impactful fix-inducing changes and save inspection effort.     

Guaranteed Dynamic-System State Estimation by the Method of Bidirectional Dynamic Programming

The problem of guaranteed estimation (smoothing, filtration, prediction) of a dynamic process observed on a finite discrete time interval is solved, based on generalization of the dynamic programming procedure for the case with sequential optmization in direct and inverse time.     

Design,development and modelling of single actuated,compliant and symmetrical multi link hopping mechanism

Journal of Mechanical Science and Technology - In this study, we present the design and development of a compliant multi-link hopping mechanism actuated by a single DC motor. Mechanism consists of...     

Using of Photoluminescent Tile for Evacuation of the Buildings During Electrical Failure

Photoluminescent pigments could be successfully applied on the wall tiles, floor tiles and porcelain tiles as well as glass substrates （glass mosaics, borders, and cutted glass with various designs）. For this applications, these products can be used for different purposes. In this study, these pigments are applied on the ceramic tiles and glass mosaics/tiles with traditional ceramic production line. These products are intentended to provide guidance in the event of a power failure. With this study also aimed to prevent potential accidents and injury during evacuation of building.     

Effect of packaging materials and storage temperature on the quality of sour cherry nectar

The purpose of this research was to determine the effects of the packaging materials and size on the stability of monomeric anthocyanins, polyphenols, antioxidant activity, ascorbic acid, colour index and hydroxyl methyl furfural (HMF) during the 12‐month shelf life of sour cherry nectars at 4 °C and 20 °C. Sour cherry nectars were aseptically filled out into packaging of different sizes and materials. The packaging included cartons of two different sizes (200 and 1000 mL) and aluminium cans (330 mL). Results showed that the nectars were of better quality when stored at lower temperatures. HMF generally increased significantly for all nectars during storage. Conversely, the total polyphenol content and the antioxidant activity of the nectars stored in aluminium cans and the larger‐sized carton packaging decreased during storage. Lower anthocyanin loss and colour change were found in the nectars stored in aluminium cans. However, the better packaging material was found to be the large‐sized carton package when HMF was analysed.     

Dyeing of poly(lactic acid) fibres with synthesised novel heterocyclic disazo disperse dyes

Poly(lactic acid) (PLA) is the first melt‐processable, renewable, sustainable and biodegradable natural‐based synthetic fibre. It has a broad range of uses and combines ecological advantages with outstanding performance in textiles. PLA fibre, as an aliphatic polyester, can be dyed with disperse dyes. Apart from the limited number of commercial disperse dyes, disperse dye exhaustion on PLA is generally lower than that on  poly(ethylene terephthalate) (PET). In this study, new heterocyclic disazo disperse dyes, substituted with methyl, nitro and chloro groups at their ortho‐, meta‐ and para‐ positions, synthesised in our previous study, were applied to PLA and PET fibres to examine their dyeing performance, and colour fastness and dye exhaustion properties. Different shades of yellow, orange, reddish brown and brown were obtained. Most of the synthesised novel heterocyclic disazo disperse dyes exhibited good build‐up properties with high K/S levels on both fibres. Para‐ bonding substituent provided higher K/S values than meta‐ and ortho‐ positions for –NO₂ and –Cl substituents for both fibres. Overall, the most synthesised novel heterocyclic disazo disperse dyes in this study exhibited good build‐up properties with high K/S, exhaustion and wet fastness levels on both PLA and PET fibres.