Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

Effect of nitrogen on the antibacterial behavior of oxynitride glasses

The main drawback of bioglasses is their restricted use in load bearing applications and the consequent need to develop stronger glassy materials. This has led to the consideration of oxynitride glasses for numerous biomedical applications. This paper investigated two different types of glasses at a constant cationic ratio, with and without nitrogen (a N containing and a N-free glass composition) to better understand the effect of N on the biological properties of glasses. The results revealed that the addition of N increased the glass transition temperature, isoelectric point (IEP) and slightly increased wettability. Moreover, compared to N including glass, N-free glass exhibited better anti-bacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), two key bacteria that infect implants. In summary, these in vitro results indicated that amine functional groups existing in N containing glasses which are missing in N-free glasses, caused a slight difference in wetting behavior and a more obvious change in isoelectric point and in bacterial response. N-free glasses exhibited better inhibitory results both against E. coli and S. aureus compared to N including glass suggesting that oxygen rich glasses should be further studied for their novel antibacterial properties.     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

Prolymphocytic leukemia: diagnosis and treatment. A case report

A patient with B-cell prolymphocytic leukemia (PLL) who has had a prolonged survival is presented. The patient was diagnosed incidentally while asymptomatic, but later developed progressive disease. He was refractory to alkylating agents and fludarabine, but responded to treatment with cyclophosphamide, doxorubicin, vincristine, and prednisone. This patient's prolonged survival may be due partly to his diagnosis at an indolent phase, possibly representing the early phase of the natural course of the disease. Diagnosis, clinical course, and treatment options for PLL are discussed.     

Malaysia's Multimedia Super Corridor Cluster: communication linkages among stakeholders in a national system of innovation

As the wave of globalization washes over geographical boundaries, the world steps into the era of a new knowledge-based economy with governments striving to encourage innovation in industry especially through national systems of innovation. A national system of innovation (NSI) is considered important because how a nation utilizes and exploits its NSI will determine whether it can compete and ride the wave of globalization or be carried by it and thrashed onto the shores of the new economy. This paper seeks to highlight the linkages developed for enabling communication among the various NSI stakeholders for achieving goals in one such effort, viz. the Multimedia Super Corridor (MSC) Cluster of Malaysia. The MSC offers a vision to create a global multimedia climate through an integrated environment of interlinked elements and attributes. The government of Malaysia, realising the significance of the NSI as a way to better utilize, exploit, and enhance systems, is making efforts to this effect. The efforts include bringing together various stakeholder organizations under the "Multimedia Flagship Applications" to develop flagship applications. This is for the development of information technology applications to pave the way toward a knowledge-based economy. The MSC Cluster is presented here as a physical manifestation of the NSI, and it gives an idea as to how policy makers can design linkages for communication among the various stakeholders to further national innovative performance and competitiveness in general.     

Lateral polysilicon pn diodes: current-voltage characteristicssimulation between 200 K and 400 K using a numerical approach

The current-voltage characteristics of lateral pn diodes fabricated in polysilicon layer grown by LPCVD on oxidized silicon substrates are analyzed versus temperature. The simulation proposed by Greve (1985) using the analytical current modeling is applied to forward and reverse junction currents for various temperatures; this modeling shows its limitations. Then to fit the experimental characteristics at low and high temperatures as well as at low and high current levels, a numerical modeling is developed taking into account the local electrical field effect on recombination and generation mechanisms at grain boundaries in the whole of the structure, i.e., quasi-neutral and depleted regions. This modeling allows one to fit the complete I-V experimental curves in the whole of the considered temperature range (200 K-400 K) with physical acceptable parameters     

Subsurface Characterization at Ground Failure Sites in Adapazari, Turkey

Ground failure in Adapazari, Turkey during the 1999 Kocaeli earthquake was severe. Hundreds of structures settled, slid, tilted, and collapsed due in part to liquefaction and ground softening. Ground failure was more severe adjacent to and under buildings. The soils that led to severe building damage were generally low plasticity silts. In this paper, the results of a comprehensive investigation of the soils of Adapazari, which included cone penetration test (CPT) profiles followed by borings with standard penetration tests (SPTs) and soil index tests, are presented. The effects of subsurface conditions on the occurrence of ground failure and its resulting effect on building performance are explored through representative case histories. CPT- and SPT-based liquefaction triggering procedures adequately identified soils that liquefied if the clay-size criterion of the Chinese criteria was disregarded. The CPT was able to identify thin seams of loose liquefiable silt, and the SPT (with retrieved samples) allowed for reliable evaluation of the liquefaction susceptibility of fine-grained soils. A well-documented database of in situ and index testing is now available for incorporating in future CPT- and SPT-based liquefaction triggering correlations.     

Growth and Characterization of YbBCO Films on Textured Gd2O3 Buffer-Layered Ni Tapes: All Sol–Gel Process

YbBa₂Cu₃O_7?x (YbBCO) thick films were grown on buffered, cube-textured Nickel tapes by sol–gel dip-coating method. Yb-123 films were prepared using solutions of Yb, Ba, and Cu organometallic compounds. A solution-based Gd₂O₃ buffer layer was deposited by dip-coating process with excellent texture and uniformity. The texture development and surface morphology of the buffer-layer films were examined by X-ray diffraction, pole figures, and ESEM analysis. Microstructure and characterization of Yb-123 films were done by ESEM, EDS, and XRD analysis. T _c and J _c were conducted by four-wire measurement method