Assessment of the Influence of the Selected Range of Visible Light Radiation on the Durability of the Gel with Ascorbic Acid and Its Derivative

(1) Background: Depending on the type of hydrophilic polymer used, different types of hydrogels may be chemically stable or may degrade and eventually disintegrate, or dissolve upon exposure to sunlight. Many over-the-counter medications are now stored with a limited control of temperature, humidity and lighting. Therefore, in this study, the photostability of a gel made of cross-linked polyacrylic acid (PA), methylcellulose (MC) and aristoflex (AV) was assessed, and the interaction between the polymers used and ascorbic acid and its ethylated derivative was investigated. (2) Methods: The samples were continuously irradiated at constant temperature for six hours. The stability of the substance incorporated into the gels was assessed using a UV-Vis spectrophotometer. FTIR-ATR infrared spectroscopy was used to measure changes during the exposure. (3) Results: Ascorbic acid completely decomposed between the first and second hours of illumination in all samples. The exception is the preparation based on polyacrylic acid with glycerol, in which the decomposition of ascorbic acid slowed down significantly. After six hours of irradiation, the ethylated ascorbic acid derivative decomposed in about 5% for the polyacrylic acid-based gels and aristoflex, and in the methylcellulose gel it decomposed to about 2%. In the case of ascorbic acid, the most stable formulation was a gel based on polyacrylic acid and polyacrylic acid with glycerol, and in the case of the ethyl derivative, a gel based on methylcellulose. (4) Conclusions: The experiment showed significant differences in the decomposition rate of both compounds, resulting from their photostability and the polymer used in the hydrogel.     

The preparation of TiO2–nitrogen doped by calcination of TiO2·xH2O under ammonia atmosphere for visible light photocatalysis

The investigation on incorporating nitrogen group into titanium dioxide in order to obtain powdered visible light-active photocatalysts is presented. The industrial hydrated amorphous titanium dioxide (TiO₂·xH₂O) obtained directly from sulphate technology installation was modified by heat treatment at temperatures of 100–800 °C for 4 h in an ammonia atmosphere. The photocatalysts were characterized by UV–VIS–DR and XRD techniques. The UV–VIS–DR spectra of the modified catalysts exhibited an additional maximum in the VIS region (, ) which may be due to the presence of nitrogen in TiO₂ structure. On the basis of XRD analysis it can be supposed that the presence of nitrogen does not have any influence on the transformation temperature of anatase to rutile. The photocatalytic activity of the modified photocatalysts was determined on the basis of decomposition rate of phenol and azo-dye (Reactive Red 198) under visible light irradiation. The highest rate of phenol degradation was obtained for catalysts calcinated at 700 °C (6.55%), and the highest rate of dye decomposition was found for catalysts calcinated at 500 and 600 °C (ca. 40–45%). The nitrogen doping during calcination under ammonia atmosphere is a very promising way of preparation of photocatalysts which could have a practical application in water treatment system under broader solar light spectrum.     

Bifunctional Opioid/Melanocortin Peptidomimetics for Use in Neuropathic Pain: Variation in the Type and Length of the Linker Connecting the Two Pharmacophores

Based on the mechanism of neuropathic pain induction, a new type of bifunctional hybrid peptidomimetics was obtained for potential use in this type of pain. Hybrids consist of two types of pharmacophores that are connected by different types of linkers. The first pharmacophore is an opioid agonist, and the second pharmacophore is an antagonist of the pronociceptive system, i.e., an antagonist of the melanocortin-4 receptor. The results of tests in acute and neuropathic pain models of the obtained compounds have shown that the type of linker used to connect pharmacophores had an effect on antinociceptive activity. Peptidomimetics containing longer flexible linkers were very effective at low doses in the neuropathic pain model. To elucidate the effect of linker lengths, two hybrids showing very high activity and two hybrids with lower activity were further tested for affinity for opioid (mu, delta) and melanocortin-4 receptors. Their complexes with the target receptors were also studied by molecular modelling. Our results do not show a simple relationship between linker length and affinity for particular receptor types but suggest that activity in neuropathic pain is related to a proper balance of receptor affinity rather than maximum binding to any or all of the target receptors.     

40 Years after the Registration of Acyclovir: Do We Need New Anti-Herpetic Drugs?

Herpes simplex virus types 1 and 2 HSV1 and 2, namely varicella-zoster VZV and cytomegalovirus CMV, are among the most common pathogens worldwide. They remain in the host body for life. The course of infection with these viruses is often asymptomatic or mild and self-limiting, but in immunocompromised patients, such as solid organ or bone marrow transplant recipients, the course can be very severe or even life-threatening. Unfortunately, in the latter group, the highest percentage of infections with strains resistant to routinely used drugs is observed. On the other hand, frequent recurrences of genital herpes can be a problem even in people with normal immunity. Genital herpes also increases the risk of acquiring sexually transmitted diseases, including HIV infection and, if present in pregnant women, poses a risk to the fetus and newborn. Even more frequently than herpes simplex, congenital infections can be caused by cytomegalovirus. We present the most important anti-herpesviral agents, the mechanisms of resistance to these drugs, and the associated mutations in the viral genome. Special emphasis was placed on newly introduced drugs such as maribavir and brincidofovir. We also briefly discuss the most promising substances in preclinical testing as well as immunotherapy options and vaccines currently in use and under investigation.     

Expression of Irisin/FNDC5 in Breast Cancer

Irisin is a myokine formed from fibronectin type III domain-containing protein 5 (FNDC5), which can be found in various cancer tissues. FNDC5 and irisin levels have been poorly studied in the tumor tissues of breast cancer (BC). The aim of this study was to determine the levels of irisin expression in BC tissues and compare them to clinicopathological factors and Ki-67 and PGC-1α expression levels. Tissue microarrays (TMAs) with 541 BC tissues and 61 samples of non-malignant breast disease (NMBD; control) were used to perform immunohistochemical reactions. FNDC5 gene expression was measured in 40 BC tissue samples, 40 samples from the cancer margin, and 16 NMBD samples. RT-PCR was performed for the detection of FNDC5 gene expression. Higher irisin expression was found in BC patients compared to normal breast tissue. FNDC5/irisin expression was higher in patients without lymph node metastases. Longer overall survival was observed in patients with higher irisin expression levels. FNDC5/irisin expression was increased in BC tissues and its high level was a good prognostic factor for survival in BC patients.     

Similarity and grouping of perlite and zeolite abrasive fillers: A replacement test

Inverse gas chromatography was used to estimate surface activity expressed by the dispersive component of the surface free energy, γ, as well as parameters K_A and K_D describing surface ability to act as electron acceptor and donor, respectively. These parameters characterize the ability of the surface to specific interactions. The method was also applied to describe the magnitude of filler‐phenolic resin interaction by Flory‐Huggins parameter, χ′₂₃. Granulation, surface area and porosity were also determined. The minimum number of parameters required to complete characterization of filler properties has been selected by principal component analysis. The usefulness of the selection for the abrasive industry has been proven. Moreover, the similarities and deviations from “an average” filler was determined by chemometric methods. Principal component analysis (PCA) and a novel procedure based on sum of ranking differences (SRD) were successfully applied for selection of the best fillers, and of advantageous parameters for characterization of the fillers. Similar and diverse fillers have been chosen based on clustering pattern by PCA and SRD. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Staphylococcus aureus—A Known Opponent against Host Defense Mechanisms and Vaccine Development—Do We Still Have a Chance to Win?

The main purpose of this review is to present justification for the urgent need to implement specific prophylaxis of invasive Staphylococcus aureus infections. We emphasize the difficulties in achieving this goal due to numerous S. aureus virulence factors important for the process of infection and the remarkable ability of these bacteria to avoid host defense mechanisms. We precede these considerations with a brief overview of the global necessitiy to intensify the use of vaccines against other pathogens as well, particularly in light of an impasse in antibiotic therapy. Finally, we point out global trends in research into modern technologies used in the field of molecular microbiology to develop new vaccines. We focus on the vaccines designed to fight the infections caused by S. aureus, which are often resistant to the majority of available therapeutic options.     

Acrylic bone cements modified with poly(ethylene glycol)‐based biocompatible phase‐change materials

The high polymerization temperature of acrylic bone cements used in hip replacement implantation may cause thermal necrosis of surrounding tissues. In order to reduce the polymerization temperature, acrylic bone cement has been modified with a biocompatible polymeric phase‐change material (PCM) based on poly(ethylene glycol) (PEG) of different molecular weights and stabilized with potato starch. Structural and morphological studies were performed, and the thermal and mechanical properties were investigated. The incorporation of PEG‐based PCM led to a decrease in the polymerization temperature of bone cement from 70 °C for unmodified cement to 58 °C for modified cement. Modified cement materials were stable in incubation tests, although acoustic analysis data revealed a decrease in propagation speed after incubation, which indicates formation of material defects (pores, cracks, voids, etc.) due to water activity. However, in the regeneration process, these defects can be filled by freshly grown bone tissue leading to better incorporation of bone cement replacements into tissue. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43898.     

Synthesis,modification, and porous properties of new glycidyl methacrylate copolymers

Synthesis, copolymerization, and physicochemical properties of new, of different degrees of crosslinker tetrafunctional bis[4(2‐hydroxy‐3‐methacryloyloxypropoxy)phenyl]sulfide and glycidyl methacrylate copolymers are presented. The monomers were used for the synthesis of porous microspheres in the presence of pore‐forming diluents, decan‐1‐ol, and toluene. Influence of diluents composition on their porous structures was studied. Porous structure of the obtained microspheres in dry (from nitrogen adsorption–desorption measurements) states was studied. Their chemical structures were studied by the use of Fourier transform infrared. The number of epoxy groups of the obtained copolymers, their thermal properties (thermogravimetric analysis), and swelling characteristics in 10 solvents of different chemical nature were examined. Selected copolymers were modified by amines in the epoxide ring‐opening reaction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011