Effect of the use of mineral filler on the properties of concrete

Engineers of the concrete technology are increasingly concerned with the material passing through a sieve of the size under 0.149 mm. Materials called very fine aggregate or mineral filler may affect the performance of concrete in an either positive or a negative way. Discussions on aggregate containing very fine material are vitally important. Washing the aggregate residue has been the sole way to solve this matter to date. This is mainly based on the debatable opinion that materials of this kind are regarded as clay material. The goal of the study was to determine how the content of mineral filler might affect properties of concrete. Two types of aggregates with different amounts of cement and mineral filler were used. Basically, mineral filler replaced sand. The effect of applying different amounts of mineral filler on concrete was then determined. The addition of 7-10% of mineral filler to fine aggregate (0-2 mm) was found to considerably improve the properties of concrete.     

(BaTiO3)1-x + (Co0.5Ni0.5Nb0.06Fe1.94O4)x nanocomposites: Structure,morphology, magnetic and dielectric properties

Two phase-based nanocomposites consisting of dielectric barium titanate (BaTiO₃ or BTO) and magnetic spinel ferrite Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄ (CNNFO) have been synthesized through solid state route. Series of (BaTiO₃)_1-x + (Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄)_x nanocomposites with x content of 0.00, 0.25, 0.50, 0.75, and 1.00 were considered. The structure has been examined via X-rays diffraction (XRD) and indicated the occurrence of both perovskite BTO and spinel CNNFO phases in various nanocomposites. A phase transition from tetragonal BTO structure to cubic structure occurs with inclusion of CNNFO phase. The average crystallites size of BTO phase decreases, whereas that for the CNNFO phase increases with increasing x in various nanocomposites. The morphological observations revealed that the porosity is highly reduced, and the connectivity between grains is enhanced with increasing x content. The optical properties have been investigated by UV−vis diffuse reflectance spectroscopy. The deduced band gap energy (E_g) value is found to reduce with increasing the content of spinel ferrite phase. The magnetic as well as the dielectric properties were also investigated. The analysis showed that CNNFO ferrite phase greatly affects the magnetic properties and dielectric response of BTO material. The obtained findings can be useful to enhance the performances of magneto-dielectric composite-based systems.     

Detection of COVID-19 and its pulmonary stage using Bayesian hyperparameter optimization and deep feature selection methods

Since the first case of COVID-19 was reported in December 2019, many studies have been carried out on artificial intelligence for the rapid diagnosis of the disease to support health services. Therefore, in this study, we present a powerful approach to detect COVID-19 and COVID-19 findings from computed tomography images using pre-trained models using two different datasets. COVID-19, influenza A (H1N1) pneumonia, bacterial pneumonia and healthy lung image classes were used in the first dataset. Consolidation, crazy-paving pattern, ground-glass opacity, ground-glass opacity and consolidation, ground-glass opacity and nodule classes were used in the second dataset. The study consists of four steps. In the first two steps, distinctive features were extracted from the final layers of the pre-trained ShuffleNet, GoogLeNet and MobileNetV2 models trained with the datasets. In the next steps, the most relevant features were selected from the models using the Sine–Cosine optimization algorithm. Then, the hyperparameters of the Support Vector Machines were optimized with the Bayesian optimization algorithm and used to reclassify the feature subset that achieved the highest accuracy in the third step. The overall accuracy obtained for the first and second datasets is 99.46% and 99.82%, respectively. Finally, the performance of the results visualized with Occlusion Sensitivity Maps was compared with Gradient-weighted class activation mapping. The approach proposed in this paper outperformed other methods in detecting COVID-19 from multiclass viral pneumonia. Moreover, detecting the stages of COVID-19 in the lungs was an innovative and successful approach.     

Deep learning frameworks to learn prediction and simulation focused control system models

Deep learning (DL) methods have brought world-shattering breakthroughs, especially in computer vision and classification problems. Yet, the design and deployment of DL methods in time series prediction and nonlinear system identification applications still need more progress. In this paper, we present DL frameworks that are developed to provide novel approaches as solutions to the aforementioned engineering problems. The proposed DL frameworks leverage the advantages of autoencoders and long-short term memory network, which are known being data compression and recurrent structures, respectively, to design Deep Neural Networks (DNN) for modeling time series and nonlinear systems with high performance. We provide recommendations on how deep AEs and LSTMs should be utilized to end up with efficient Prediction-focused (Pf) and Simulation-focused (Sf) DNNs for time series and system identification problems. We present systematic learning methods for the DL frameworks that allow straightforward learning of Pf-DNN and Sf-DNN models in detail. To demonstrate the efficiency of the developed DNNs, we present various comparative results conducted on the benchmark and real-world datasets in comparison with their conventional, shallow, and deep neural network counterparts. The results clearly show that the deployment of the proposed DL frameworks results with DNNs that have high accuracy, even with a low dimensional feature vector.

     

Interval type-2 fuzzy inverse controller design in nonlinear IMC structure

In the recent years it has been demonstrated that type-2 fuzzy logic systems are more effective in modeling and control of complex nonlinear systems compared to type-1 fuzzy logic systems. An inverse controller based on type-2 fuzzy model can be proposed since inverse model controllers provide an efficient way to control nonlinear processes. Even though various fuzzy inversion methods have been devised for type-1 fuzzy logic systems up to now, there does not exist any method for type-2 fuzzy logic systems. In this study, a systematic method has been proposed to form the inverse of the interval type-2 Takagi-Sugeno fuzzy model based on a pure analytical method. The calculation of inverse model is done based on simple manipulations of the antecedent and consequence parts of the fuzzy model. Moreover, the type-2 fuzzy model and its inverse as the primary controller are embedded into a nonlinear internal model control structure to provide an effective and robust control performance. Finally, the proposed control scheme has been implemented on an experimental pH neutralization process where the beneficial sides are shown clearly.     

Differentiating types of muscle movements using a wavelet based fuzzy clustering neural network

Abstract: The electromyographic signals observed at the surface of the skin are the sum of many small action potentials generated in the muscle fibres. After the signals are processed, they can be used as a control source of multifunction prostheses. The myoelectric signals are represented by wavelet transform model parameters. For this purpose, four different arm movements (elbow extension, elbow flexion, wrist supination and wrist pronation) are considered in studying muscle contraction. Wavelet parameters of myoelectric signals received from the muscles for these different movements were used as features to classify the electromyographic signals in a fuzzy clustering neural network classifier model. After 1000 iterations, the average recognition percentage of the test was found to be 97.67% with clustering into 10 features. The fuzzy clustering neural network programming language was developed using Pascal under Delphi.     

A fuzzy assessment framework to select among transportation investment projects in Turkey

Selecting the best transportation investment project (TIP) is often a difficult task, since many social, environmental and economic criteria have to be considered simultaneously. Evaluating a set of different projects, especially the best set of alternatives, portfolios, is even more complex. Pursuing the goal of selecting the best TIP portfolio, we propose a fuzzy assessment method to aid the selection process of a multi-criterion project by utilizing the concept of entropy and interval normalization procedure in a fuzzy analytic hierarchy process (F-AHP). Then, regarding this informative phase, we propose a fuzzy linear programming model to select the best TIP portfolio under uncertain cost pressure. A real case study is conducted to illustrate the efficiency of the proposed method.     

The influence of operating and device parameters on the maximum efficiency and the maximum output power of thermoelectric generator

Thermoelectric power generators are one of the promising green energy sources. The operating and the generator parameters influence the generator output performance. In the present study, the influence of the operating and the generator parameters on the maximum output power and the efficiency of the thermoelectric power generator are examined. The output power corresponding to the maximum efficiency and the maximum attainable output power of the generator are compared. It is found that the maximum power of the thermoelectric generator corresponding to the high Figure of Merit is very sensitive to the operating temperature. The maximum power attainable is larger than that its counterpart corresponding to the maximum generator efficiency. Copyright © 2010 John Wiley & Sons, Ltd.