Optimum design for buckling of plain and stiffened composite axisymmetric shell panels/shells

The buckling of plain and discretely stiffened composite axisymmetric shell panels/shells made of repeated sublaminate construction is studied using the finite element method. In repeated sublaminate construction, a full laminate is obtained by repeating a basic sublaminate, which has a smaller number of plies. The optimum design for buckling is obtained by determining the layup sequence of the plies in the sublaminate by ranking, so as to achieve maximum buckling load for a specified thickness. For this purpose, a four-noded 48-dof quadrilateral composite thin shell element, together with fully compatible two-noded 16-dof composite meridional and parallel circle stiffener elements are used.     

An imperfect production process for time varying demand with inflation and time value of money – An EMQ model

The paper deals with an economic manufacturing quantity (EMQ) model for time-dependent (quadratic) demand pattern. Every manufacturing sector wants to produce perfect quality items. But in long run process, there may arise different types of difficulties like labor problem, machinery capabilities problems, etc., due to that the machinery systems shift from in-control state to out-of-control state as a result the manufacturing systems produce imperfect quality items. The imperfect items are reworked at a cost to become the perfect one. The rework cost may be reduced by improvements in product reliability i.e., the production process depend on time and also the reliability parameter. We want to determine the optimal product reliability and production rate that achieves the biggest total integrated profit for an imperfect manufacturing process using Euler–Lagrange theory to build up the necessary and sufficient conditions for optimality of the dynamic variables. Finally, a numerical example is discussed to test the model which is illustrated graphically also.     

Note: Compact high voltage pulse transformer made using a capacitor bank assembled in the shape of primary

The experimental results of an air-core pulse transformer are presented, which is very compact (<10 Kg in weight) and is primed by a capacitor bank that is fabricated in such a way that the capacitor bank with its switch takes the shape of single-turn rectangular shaped primary of the transformer. A high voltage capacitor assembly (pulse-forming-line capacitor, PFL) of 5.1 nF is connected with the secondary of transformer. The transformer output voltage is 160 kV in its second peak appearing in less than 2 μS from the beginning of the capacitor discharge. The primary capacitor bank can be charged up to a maximum of 18 kV, with the voltage delivery of 360 kV in similar capacitive loads.     

Optimization of friction stir welding process using NSGA-II and DEMO

In welding processes, the selection of optimal process parameter settings is very important to achieve best weld qualities. In this work, neuro-multi-objective evolutionary algorithms (EAs) are proposed to optimize the process parameters in friction stir welding process. Artificial neural network (ANN) models are developed for the simulation of the correlation between process parameters and mechanical properties of the weld using back-propagation algorithm. The weld qualities of the weld joint, such as ultimate tensile strength, yield stress, elongation, bending angle and hardness of the nugget zone, are considered. In order to optimize those quality characteristics, two multi-objective EAs that are non-dominated sorting genetic algorithm II and differential evolution for multi-objective are coupled with the developed ANN models. In the end, multi-criteria decision-making method which is technique for order preference by similarity to the ideal solution is applied on the Pareto front to extract the best solutions. Comparisons are conducted between results obtained from the proposed techniques, and confirmation experiments are performed to verify the simulated results.

     

Dielectric and impedance spectroscopy of barium orthovanadate ceramics

Barium orthovanadate (Ba₃V₂O₈), a derivative of perovskite family has been prepared using a mixed-oxide technique. The room temperature X-ray diffraction analysis has confirmed the formation of a single phase compound in trigonal crystal structure. The study of microstructure by scanning electron microscopy shows that the compound has well defined grains, distributed uniformly throughout the surface. The studies of dielectric parameters (ε_r and tan δ) of the compound as a function of temperature at three different frequencies (100, 500, 1,000 kHz) exhibit that they are almost temperature independent at low and medium temperature ranges. Detailed studies of impedance and related parameters exhibit that the electrical properties of the material are strongly dependent on temperature, and bear a good correlation with its microstructures. The bulk resistance, evaluated from complex impedance spectra, is found to be decreasing with rise in temperature. It shows that the material has negative temperature co-efficient of resistance similar to that of semiconductors. The same behaviour has also been observed in the study of I–V characteristics of the material. The complex electric modulus analysis indicates the possibility of hopping conduction mechanism in the system with non-exponential type of conductivity relaxation. The nature of variation of dc conductivity with temperature confirms the Arrhenius behavior of the material. The ac conductivity spectra show a typical signature of an ionic conducting system, and are found to obey Jonscher’s universal power law.     

Synthesis of SBA 15 graphene oxide composite membrane using phenol–formaldehyde resin pore modifier for CO2 separation

Present study highlights the development of carbon-loaded SBA 15 membrane on clay-alumina tubular support and its performance on the CO₂ separation efficiencies from different mixture gases. To modify the large pores of SBA 15 by graphitic carbon, low molecular weight phenol–formaldehyde (PF) resin was incorporated into the mesoporous channel followed by calcination under inert atmosphere. The modified ordered pore structure of the membrane has been characterized by low-angle XRD, TEM, and pore size distribution analysis. The chemical state of the deposited carbon phase into the SBA 15 pores was analyzed by X-ray photoelectron and Raman spectroscopy. Carbon having graphitic nature mainly in graphene oxide has been deposited into the mesopore of SBA 15 resulting decrease in pore size from 8.9 to 1.0 nm. Finally, the developed SBA 15 carbon membranes were characterized by CO₂ permeation and separation selectivity of CO₂/CH₄, CO₂/CO. Highest CO₂/CH₄ separation factor was achieved as 16.9 with CO₂ permeance 13.6 × 10^–8 mol/m²/s/Pa at 200 kPa feed pressure by the 20% resin with 2 times coated membrane. In flue gas analysis, highest CO₂/CO separation factor of 32.8 was achieved. This study offers an observation on CO₂ separation from simulated BF gas for the first time and the results show the potential of the developed SBA 15/C composite membranes in commercial application.     

Performance Analysis of Ferroelectric GAA MOSFET with Metal Grain Work Function Variability

Silicon - This work represents a unique GAA MOSFET with metal work-function variations (WFVs) and ferroelectric material as dielectric. A random distribution of metal grain (TiN) with grain size...