Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Challenges in the Application of Stochastic Modal Identification Methods to a Cable-Stayed Bridge

This paper presents an analysis of the data collected in the ambient vibration test of the International Guadiana cable-stayed Bridge, which links Portugal and Spain, based on different output-only identification techniques: peak-picking, frequency domain decomposition, covariance-driven stochastic subspace identification, and data-driven stochastic subspace identification. The purpose of the analysis is to compare the performance of the four techniques and evaluate their efficiency in dealing with specific challenges involved in the modal identification of the tested cable-stayed bridge, namely the existence of closely spaced modes, the perturbation produced by the local vibration of stay-cables, and the variation of modal damping coefficients with wind velocity. The identified natural frequencies and mode shapes are compared with the corresponding modal parameters provided by a previously developed numerical model. Additionally, the variability of some modal damping coefficients is related with the variation of the wind characteristics and associated with a component of aerodynamic damping.     

The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens.

This study investigates the phenotype of turbulent (Re = 5,200) and laminar (Re = 2,000) flow-generated Pseudomonas fluorescens biofilms. Three P. fluorescens strains, the type strain ATCC 13525 and two strains isolated from an industrial processing plant, D3-348 and D3-350, were used throughout this study. The isolated strains were used to form single and binary biofilms. The biofilm physiology (metabolic activity, cellular density, mass, extracellular polymeric substances, structural characteristics and outer membrane proteins [OMP] expression) was compared. The results indicate that, for every situation, turbulent flow-generated biofilms were more active (p < 0.05), had more mass per cm(2) (p < 0.05), a higher cellular density (p < 0.05), distinct morphology, similar matrix proteins (p > 0.1) and identical (isolated strains -single and binary biofilms) and higher (type strain) matrix polysaccharides contents (p < 0.05) than laminar flow-generated biofilms. Flow-generated biofilms formed by the type strain revealed a considerably higher cellular density and amount of matrix polysaccharides than single and binary biofilms formed by the isolated strains (p < 0.05). Similar OMP expression was detected for the several single strains and for the binary situation, not dependent on the hydrodynamic conditions. Binary biofilms revealed an equal coexistence of the isolated strains with apparent neutral interactions. In summary, the biofilms formed by the type strain represent, apparently, the worst situation in a context of control. The results obtained clearly illustrate the importance of considering strain variation and hydrodynamics in biofilm development, and complement previous studies which have focused on physical aspects of structural and density differences.     

Copper phthalocyanine as corrosion inhibitor for ASTM A606-4 steel in 16% hydrochloric acid

A study based on the corrosion inhibition properties of copper phthalocyanine is described. Coverage degrees of copper phthalocyanine (Cu-phcy) on ASTM-A606-4 steel, obtained by weight loss measurements, were fitted to Langmuir, Frumkin, Temkin and Flory–Huggins adsorption isotherms. A better fit to the Langmuir isotherm was obtained. The polarization curves showed that polarization of both the anodic and cathodic reactions were verified for concentrations higher than 10^–4 M, indicating a mixed type action. Only the anodic reactions were polarized for lower concentrations. At high frequencies the Nyquist diagrams showed one capacitive loop attributable to double layer charging and a small one at intermediary frequencies attributable to the faradaic process of hydrogen evolution. The formation of an adsorbed film was characterized by increasing charge transfer resistance values in the low frequency range for increasing inhibitor concentrations. According to the techniques used in this study, copper phthalocyanines showed a high corrosion inhibiting efficiency for all concentrations.     

Health and education: alternative courses for the development of nursing personnel

The disposition behavior of trientine, a selective copper-chelating drug for Wilson's disease, and its metabolites in normal patients with Wilson's disease and rats were studied. A high concentration of metabolites appeared in blood samples of patients and rats in the early stage after administration of trientine. Furthermore, large amount of trientine metabolites were excreted into the urine of patients. These results suggest that trientine is remarkably subjected to a first-pass effect. The drug concentration area under the curve (AUC) of the unchanged form and the metabolites of trientine in patients was not dependent on the administered dosage. It seems that the absorption process is an important factor for the disposition behavior of trientine, we have also investigated the uptake characteristics of trientine by rat intestinal brush-border membrane vesicles. The uptake characteristics of trientine were similar to the physiological polyamines, spermine and spermidine. The uptake rate of trientine was dose-dependently inhibited by spermine and spermidine. Moreover, spermine competitively inhibited the uptake of trientine with a Ki value of 18.6 muM. This value is very close to the Km value for spermine (30.4 muM). These data suggested that the uptake mechanism of trientine in rat small intestinal brush-border membrane vesicles was almost identical to that of spermine and spermidine, and that the physiological polyamines seem to have the ability to inhibit the absorption of trientine from the gastrointestinal tract.     

HIV-1 and HIV-2 antibodies in pregnant women in the City of Maputo, Mozambique. A comparative study between 1982/1983 and 1990

The seroprevalence of HIV-1 and HIV-2 among pregnant women in Maputo, the capital of Mozambique, was compared between the years 1982/83, 1988 and 1990. None of the 432 serum samples collected in 1982/83 was positive for HIV antibodies whereas in 1988 the HIV-1 and HIV-2 seroprevalence was 0.4% (2/500) and 0.6% (3/500), respectively, and in 1990 0.6% (12/2014) and 0.2% (4/2014), respectively. These results indicate that HIV infection has been introduced recently in Maputo and is spreading at a slow rate among women.     

Spouted bed drying of cork stoppers

The spouted bed is commonly used to dry granular particles as it displays some special characteristics which render it capable of performing cyclic operations, with particles that are very difficult to fluidize under a different type of bed.Information on the characteristic drying rates of cork stoppers is still very limited in the technical and scientific literature, and until now no published data was found on the spouted bed drying of cork stoppers.The characterization of the drying performance of Port wine cork stoppers was carried out in a laboratory scale spouted bed. Characteristic drying curves were determined with 29 mm × 21 mm cork stoppers under several operating conditions. Values for the effective diffusivity were obtained in the range of 1.36 × 10⁻⁹ to 4.44 × 10⁻⁹ m²/s, with the temperature dependence represented by an Arrhenius-type relationship. The activation energy obtained was 28.72 kJ/mol.     

Exporting water wave optimization concepts to modified simulated annealing algorithm for size optimization of truss structures with natural frequency constraints

This paper proposes an improved version of a recently proposed modified simulated annealing algorithm (MSAA) named as an improved MSAA (I-MSAA) to tackle the size optimization of truss structures with frequency constraint. This kind of problem is problematic because its feasible region is non-convex while the boundaries are highly non-linear. The main motivation is to improve the exploitative behavior of MSAA, taking concept from water wave optimization metaheuristic (WWO). An interesting concept of WWO is its breaking operation. Thirty functions extracted from the CEC2014 test suite and four benchmark truss optimization problems with frequency constraints are explored for the validity of the proposed algorithm. Numerical results indicate that I-MSAA is more reliable, stable and efficient than those found by other existing metaheuristics in the literature.