Combination of nuclear magnetic resonance spectroscopy and nonlinear methods to analyze the copolymerization of phosphonic acid derivatives

We demonstrate in this study that the combination of modern inline monitoring methods [here: inline nuclear magnetic resonance (NMR)] with simulations gains more exact and profound kinetic results than previously used methods like linearization without that combination. The ¹H-NMR spectroscopic data (more than 100 data points) are used to construct the copolymerization diagram. The reactivity ratios are obtained applying the van Herks nonlinear least square method. The examination of the radical copolymerization of 2-hydroxyethyl methacrylate (HEMA) with (2-{[2-(ethoxycarbonyl)prop-2-en-1-yl]oxy}ethyl) phosphonic acid (ECPPA) as important adhesive monomer used in dentistry yields reactivity ratios of r_HEMA = 1.83; r_ECPPA = 0.42. The copolymerization diagram reflects nonideal, non-azeotropic copolymerization. The sequence distribution of the obtained by Monte Carlo simulation indicates the generation of statistical copolymers. As an important finding, it is demonstrated that the repeating units responsible for etching and adhesion are arranged over the whole polymer chain, which is necessary to achieve proper functionality. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48256.     

On the reliability of Landsat TM for estimating forest variables byregression techniques: a methodological analysis

In order to build models that relate thematic mapper (TM) imagery to field forest variables, several regression techniques, such as the ones based on the Mallows' C_p and the adjusted R² statistics, were applied. Nevertheless, although the best created models had good fittings (R²>0.65) apparently supported by a clear statistical significance (p<0.0001), later trials tested with additional plots showed that these models were, in fact, nonrobust models (models with very low-predictive capabilities). Two factors were pointed out as causes of these inconsistencies between predicted and observed values: a relatively small number of available field plots and a relatively high number of possible independent variables. Actually, different trials suggested much lower fittings for the expected “really” predictive models. Some restrictions of TM satellite data, such as its radiometric, spectral, and spatial limitations, together with restrictions arising from gathering and processing of field data, might have led to these poor relations. This study shows the need for guarantees stronger than the usual ones before concluding that there is a clear possibility of using satellite information to estimate forest parameters by means of regression techniques     

87Sr/86Sr from rock and soil into vine and wine

For provenance assignments of wines strontium isotope ratios can be used because soils from different wine-growing regions, and hence the wines grown there, each show specific ratios. Some successful applications are demonstrated.

---

⁸⁷Sr/⁸⁶Sr aus Gestein und Boden in Rebe und Wein

Zusammenfassung Zur Herkunftsbestimmung von Weinen können Strontium-Isotopenverhältnisse herangezogen werden, da die Böden verschiedener Weinbaugebiete, und damit die dort gezogenen Weine, jeweils spezifische Verhältnisse aufweisen. Einige erfolgreiche Anwendungen werden demonstriert.

     

Evaluation of the completion of influenza vaccination

OBJECTIVE: To find the reasons which determine failures to comply with anti-flu vaccinations, so that these can be corrected and the coverage of this preventive action be increased. DESIGN: Observational crossover study, done by means of a telephone survey of people over 65. A questionnaire with closed questions, composed after a pilot study and validated by Cronbach's alpha. SETTING: Primary Care Centre (PCC). PATIENTS: We calculated a population sample for qualitative variables (_ = 0.05; p = 0.60; e = 0.05) of 294 people over 65, chosen from the PCC records, by means of random sampling (K = 4) stratified for age and discounting the telephone selection bias. MEASUREMENTS AND RESULTS: The proportion of vaccinated patients (60.9%) obtained in our study did not significantly differ from that in the general population. The percentage of patients included in the programme for the first time was 14%. Level of satisfaction among those vaccinated was 89.4%, with 8.9% of problems detected being light. Main causes of non-vaccination were: thinking that they didn't need it (63.5%), ignorance of the campaign (35.7%), fear of the reaction (24.3%), forgetting (10.4%). The main form of access to the campaign information was from the PCC, both through individuals and posters. Lack of information was statistically significant (p < 0.00001) as a determinant of non-vaccination, without other factors (age, sex, associated pathologies...) explaining these differences. CONCLUSIONS: Individualised and on-going health education by the PCC is fundamental. This would enable the identification of the group not vaccinated due to their express refusal and the recovery of non-vaccinated patients.     

Shape memory properties of Ni-Ti based melt-spun ribbons

Shape-memory properties of equiatomic NiTi, Ni₄₅Ti₅₀Cu₅, and Ni₂₅Ti₅₀Cu₂₅ ribbons made by melt spinning have been studied by temperature inducing the martensitic transformation under constant tensile loads. Recoverable strains above 4 pct can be obtained under ∼100 MPa loads for the NiTi and Ni₄₅Ti₅₀Cu₅ ribbons, transforming to B19’ martensite. The B19 martensite is formed in the Ni₂₅Ti₅₀Cu₂₅ ribbon after crystallization, and according to the lowering in transformation strain as Cu content increases, the recoverable strain is close to 2.5 pct for ∼150 MPa load. The transformation temperatures exhibit a linear dependence on the applied stress, which can be quantitatively described by means of a Clausius-Clapeyron type equation. The NiTi and Ni₄₅Ti₅₀Cu₅ ribbons exhibited some degree of two-way shape-memory effect (TWSME) after thermomechanical cycling. Texture analyses performed on the different ribbons allow us to better understand the transformation strains obtained in each ribbon. The amounts of shape-memory effect (SME) and nonrecoverable strain shown by the studied ribbons are of the same order as those already observed in bulk materials, which makes melt spinning an ideal substitute to complicated manufacturing processes if really thin samples are needed. However, applicable stresses in melt-spun ribbons are limited by a relatively “premature” brittle fracture caused by irregularities in ribbon thickness.     

Relative involvement of protein kinase C and of the estrogen receptor in the cytotoxic action of a population of triphenylethylenes on MCF7 cells as revealed by correspondence factorial (CF) analysis

A multivariate statistical method, correspondence factorial (CF) analysis, was used to examine the correlations among the protein binding and cell proliferation effects of a series of 36 di- and triphenylethylenes (DPEs and TPEs). The analysis was applied to a study which measured their competition for estradiol binding to cytosol estrogen receptor (ER), their influence on protein kinase C (PKC) activity under different conditions of enzyme activation, their ability to promote the growth of a breast cancer cell line and to inhibit growth at high concentrations (cytotoxicity). The CF analysis revealed several levels of correlation. First, it distinguished those molecules within the population that stimulated rather than inhibited PKC activity. Second, it made apparent a strong correlation between cytotoxicity and inhibition of Ca++ and phosphatidylserine-dependent PKC activity, which was most marked when the enzyme had been activated by diacylglycerol indicating that PKC inhibition under physiological conditions might contribute to the overall cytotoxicity of these compounds. Third, a lower level of correlation was established between competition for ER binding and cytotoxicity. Taken together, the results suggest that MCF7 cells might be most sensitive to a cytotoxic effect of TPEs (via PKC and other targets) when they at the same time decrease estrogen-stimulated proliferation via an ER-mediated antiestrogenic effect.     

Films and fibers of oriented single wall nanotubes

As-produced nanotubes form a light, fragile and isotropic soot. Different efforts are made to process nanotubes into macroscopic forms of more practical use and more controlled properties. We briefly review in this paper two methods recently proposed to make films of magnetically aligned nanotubes and fibers by using an electrophoretic method. Preferential orientation of the nanotubes in the plane of the films or along the fiber axis is an important feature of the obtained materials. Then we describe in details a different, spinning like, process for making fibers out of single wall carbon nanotubes. This process consists of dispersing the nanotubes in a surfactant solution, re-condensing the nanotubes in the flow of a polymer solution to form a nanotube mesh, and then collating this mesh to a nanotube fiber. The behaviors of the surfactant-stabilized dispersions, which are also presented, are critical for this process. The degree of nanotubes alignment in dried fibers has been characterized by X-ray scattering. It is found to be smaller than the alignment obtained in the previous materials. However, the processing is simpler and faster and potentially scalable for large-scale production.     

Improving the Reliability of Computer Communication Networks

For networks that are directed or can be represented by a directed network,reversing one or more of the uni-directional links may provide the ability to reconnect a network that has been disconnected by link failure.In this paper,a new approach to reconfigure such networks is proposed.We develop a linear time algorithm which,when reachability has been destroyed by the removal of a single link,optimally restores reachability through the reversal of selected links.Multi-link failure reconnectability is discussed and an algorithm with polynomial complexity is given which provides a nearly optimum solution to reconnect the network.We show that the reliability of a network that allows reversals is at least twice more than that in which reversals are not permitted.Unfortunately,the reconnection of some networks cannot be established.Therefore,we discuss the maximization of reachability of such networks so that each node can reach maximum number of the other nodes.     

Analyzing the Reliability of Degradable Networks

The reachability of a strongly connected network may be destroyed after link damage,Since many networds have directed links with the potential for reversal,the reachability may be restored by reversing the direction of links.In this paper,the reliability of a network that allows reversal of links in discussed.