Chemically induced residual stresses in dental composites

In several European countries, dental composites are replacing mercury-containing amalgams as the most common restorative materials. One problem with dental composites is residual stresses which may lead to poor performance of the restoration. In the present study, a combined modeling and materials characterization approach is presented and predictions compare well with experimental data on residual stresses. The model takes stress relaxation into account through the complete relaxation time spectrum of the resin. The approach allows for detailed parametric studies where resin and composite composition as well as cure conditions may be tailored with respect to residual stress generation.     

Deformation and fracture of glass bead/ CTBN-rubber/epoxy composites

Carboxyl-terminated butadiene-acrylonitrile-rubber decreases modulus and yield stress of the studied epoxy but increases fracture toughness. The addition of glass bead compensates for the loss in modulus but has little effect on yield stress. However, it significantly contributes to the fracture toughness by providing additional mechanisms for toughening of both the unmodified and rubber-modified epoxy. For the toughened epoxies studied, fracture surfaces gave only limited information on fracture mechanisms since significant energy absorption also occurs in the material below the fracture surface. Suggestions for suitable material compositions for fiber composite matrices are given.     

Paper remote: an augmented television guide and remote control

The television (TV) is one of the most common entertainment devices in homes. Searching and finding TV programs is a common task and using TV guides is one way of performing this. This paper presents three studies that are focused on examining audiences’ TV habits and TV guide usage, evaluating a new concept based on linking paper and pen with TV technology, and studying the audiences’ attitudes toward and anticipated interest in the future guide. The results of our first study emphasize the value of using paper based TV guides and also identify the deficiencies. We also found indications that the advantages and disadvantages of paper-based TV guides are related to the physical properties of paper. Thus, we suggest a solution that uses digital pen and paper technology to offer a new interaction method for TV. A research system “Paper Remote”, is developed and used in the two subsequent studies. Viewers tick designated areas on the paper-based guide to perform actions such as channel switching. However, this solution is not a substitute for the remote control device. We argue that these user studies on linking digital paper to the TV for everyday information navigation illuminate the possibilities of providing innovative solutions also for home information systems also.     

Cryogenic temperature measurement for large applications

We have developed a resistance thermometry system for the acquisition, control and monitoring of temperature in large-scale cryogenic applications. The resistance of the sensor is converted to a voltage using a self-balancing AC bridge circuit featuring square-wave excitation currents down to 1 nA. The system is easily scalable and includes intelligent features to treat special situations such as magnet quenches different from normal operation.     

Food intake after gastrectomy for gastric carcinoma: the role of a gastric reservoir

Patients with carcinoma of the stomach who underwent curative resection were randomized to total gastrectomy (n = 49), total gastrectomy and an S-shaped gastric substitute (n = 28) or subtotal gastrectomy (n = 12); all had a Roux-en-Y reconstruction. The gastric substitute and gastric remnant allowed a volume of 400-500 ml to be installed without increments in basal pressures. The corresponding volume in the Roux limb was 100 ml. Energy intake was approximately 120 kJ/kg preoperative weight per day 3 months after operation, and then remained constant. Patients who had subtotal gastrectomy ate less (91.7 kJ/kg preoperative weight) 3 months after operation, but thereafter increased their intake. Patients allocated to have a gastric pouch or subtotal gastrectomy complained more frequently of adverse postprandial symptoms (P < 0.03) as a major cause of reduced calorie intake. The construction of a gastric reservoir did not improve nutritional adaptation after surgery for gastric carcinoma.     

Dynamics of lung collapse and recruitment during prolonged breathing in porcine lung injury

Oleic acid (OA) injection, lung lavage, and endotoxin infusion are three commonly used methods to induce experimental lung injury. The dynamics of lung collapse and recruitment in these models have not been studied, although knowledge of this is desirable to establish ventilatory techniques that keep the lungs open. We measured lung density by computed tomography during breath-holding procedures. Lung injury was induced with OA, lung lavage, or endotoxin in groups of six mechanically ventilated pigs. After a stabilization period, repetitive computed tomography scans of the same slice were obtained during prolonged expirations with and without positive end-expiratory pressure and during prolonged inspirations after 5 and 30 s of expiration. Lung collapse and recruitment occurred mainly within the first 4 s of breath-holding procedures in all three lung injury models, and some collapse and recruitment occurred even within 0.6 s. OA-injured lungs were significantly more unstable than lungs injured by bronchoalveolar lavage or endotoxin infusion. In this experimental setting, expiration times <0.6 s are required to avoid cyclic alveolar collapse during mechanical ventilation without extrinsic positive end-expiratory pressure.     

Protein engineering of alcohol dehydrogenases; effects of amino acid changes at positions 93 and 48 of yeast ADH1

By protein engineering we have investigated changes to two aminoacid residues (Trp93 and Ser48) in the substrate pocket of yeastalcohol dehydrogenase 1. Upon changing Thr48 to serine we producedan enzyme which has markedly greater activity towards aliphaticalcohols with chain length up to 8, together with a generalincrease in catalytic activity (V/K). Changes at position 93were less pronounced, with the Phe enzyme being more activethan the parent towards the range of alcohols but with the alanineenzyme showing very little difference from the wild-type. Enzymeswith the double changes at 48 and 93 showed increased activitytowards alcohols with 3–8 carbons but the increases werenot additive over the single changes. The enzymes with changesat the two positions would metabolize both stereoisomers of2-octanol whereas the parent ADH would attack only one of them.None of the engineered enzymes would attack cyclohexanol oraromatic alcohols. The results are in general agreement withthe prediction that reducing the size of amino acids in thesubstrate pocket would enhance the ability to oxidize alcoholslarger than ethanol.     

Effects of grain-shape anisotropy and texture on balanced-biaxial creep of Ti and Zr alloys

Biaxial creep behaviors of stress-relieved and recrystallized thin-walled tubing of Ti-3Al-2.5V and Zircaloy-4 are considered under equal hoop and axial stresses by internal pressurization superimposed with axial load. Both hoop and axial strains were monitored and the ratio of the strain rate along the hoop to that along the axial directions is considered to represent the degree of anisotropy. In both of these alloys, relatively weak hoop direction in cold-worked stress-relieved (CWSR) materials became slightly stronger following recrystallization. Crystallographic texture was considered in terms of x-ray pole figures from which the crystallite orientation distribution functions (CODFs) were derived and crystal plasticity model with slip dominant on prism planes was combined with the CODFs to predict the creep anisotropy. While good correlation was noted for recrystallized materials, distinct deviations are observed for CWSR that are believed to arise from grain shape anisotropy. The relatively small (equiaxed) grain size along the hoop and radial directions results in grain boundary sliding leading to stress enhancements along these directions. This anisotropy in grain boundary sliding is shown to explain the observed deviations.     

Some sexological characteristics of stress incontinent women

The goal of stress incontinence surgery is to prevent opening of the urethra during increases in intra-abdominal pressure. Greater refinements in the understanding of the pathophysiology of incontinence and experience with newer treatments have extended surgical thinking beyond the familiar paradigm "to place the urethra in a high retropubic position." When incontinence is associated with vaginal hypermobility, vaginal support may be sufficient to restore continence if the suburethral vaginal wall is sufficiently strong, an evaluation which must often be made by physical examination alone. However, when the vaginal wall is weak, the urethra will require an alternative form of support, usually a sling. If the urethra is intrinsically deficient, vaginal support may not be sufficient to prevent opening during increased intra-abdominal pressure, and coaptation by sling obstruction or periurethral bulking injection may be required. Most laparoscopic approaches to stress incontinence use Burch's method, which offers excellent urethral stability provided the suburethral vaginal wall is strong. Newer insights into the relation between vaginal mobility and urethral closure are discussed, as well as anatomic aspects of the Burch suspension relevant to laparoscopic repair.