Experimental and numerical analysis of the influence of cable tray arrangements on the resulting mass loss rate and fire spreading

In the context of industrial buildings and power plants, electrical installations and cable trays represent a main fuel load and a potential initial fire source due to possible short circuits or comparable malfunction. Furthermore, a fire can spread from one tray to additional trays mounted above and/or horizontally on one tray. Because of the high significance of cable fires, several research projects have been carried out, investigating the fire behaviour of cables from small‐scale tests, eg, the cone calorimeter, up to large‐scale tests, analysing complete cable tray constructions. The goal of the work presented in this paper is the extension of the knowledge regarding the influence of geometrical parameters like the packing density and tray distance on the burning behaviour and fire spread of cable tray installations. The results are considered, together with test results from the literature, to quantify the main physical parameters describing the burning behaviour. In a next step, the general applicability of these parameters as input data for the parametrization of the source term of numerical simulations is shown. The test results show that the burning behaviour and the fire spreading highly depend on the cable arrangement of the cables on the cable tray, in combination with other boundary conditions. By applying the results as input for a fire simulation, the mass loss rate is considered appropriately.     

Glial development in the Drosophila CNS requires concomitant activation of glial and repression of neuronal differentiation genes

Two classes of glial cells are found in the embryonic Drosophila CNS, midline glial cells and lateral glial cells. Midline glial development is triggered by EGF-receptor signalling, whereas lateral glial development is controlled by the gcm gene. Subsequent glial cell differentiation depends partly on the pointed gene. Here we describe a novel component required for all CNS glia development. The tramtrack gene encodes two zinc-finger proteins, one of which, ttkp69, is expressed in all non-neuronal CNS cells. We show that ttkp69 is downstream of gcm and can repress neuronal differentiation. Double mutant analysis and coexpression experiments indicate that glial cell differentiation may depend on a dual process, requiring the activation of glial differentiation by pointed and the concomitant repression of neuronal development by tramtrack.     

Continuously distributed phase shifts in chirped DFB lasers usingbent waveguides

The authors have implemented chirped distributed feedback (DFB) grating lasers with phase shifts [λ/8, 2λ/8 and 3λ/8] distributed continuously over various axial distances, using their recently proposed method for producing bent optical waveguides. The singlemode stability of the lasers with distributed phase shifts was found to be considerably higher than for lasers with abrupt phase shifts     

Monolithic integration of DFB laser with spot-size transformer forhighly efficient laser fibre coupling

The monolithic integration of a mushroom type InGaAs-InGaAsP MQW DFB laser with a spot-size transformer based on a two-layer lateral taper is reported. Highly efficient coupling to a butt-joined dispersion shifted singlemode fibre with a coupling loss down to 0.9 dB and large alignment tolerances was achieved, maintaining the good spectral characteristics of an isolated DFB-laser structure     

Structures of sialylated oligosaccharides of human erythropoietin expressed in recombinant BHK-21 cells

The native structures of the Asn-linked oligosaccharides and the O-glycans at Ser126 of human erythropoietin expressed from recombinant BHK cells have been elucidated. Enzymatically released N-glycans were studied by methylation analyses, fast-atom-bombardment mass spectrometry as well as one- and two-dimensional 1H-NMR spectrometry at 600 MHz. Many (82.7%) were found to be tetraantennary N-acetyllactosamine-type (22.8% with one, 3.6% with two and 0.4% with three N-acetyllactosamine repeats) being tetrasialylated (41%), trisialylated (29.6%) and disialylated (12.2%). A few (9.7%; 4.1% 2,4-branched, 5.6%, 2,6-branched) of the chains were triantennary (5.4% trisialyl, 4.3% disialyl) and 4.6% were of the disialyl diantennary type. Almost all of the innermost GlcNAc residues were alpha 1-6 fucosylated and NeuAc was exclusively alpha 2-3 linked to Gal beta 1-4GlcNAc-R; 60% of the protein was found to be O-glycosylated at Ser126; structures were monosialylated (70%) or disialylated (30%) forms of the Gal beta 1-3GalNAc core type. Glycosylation patterns at individual Asn-Xaa-Thr/Ser sites were determined by analytical high-pH anion-exchange chromatography with pulsed amperometric detection. Only tetraantennary chains with 0-3 N-acetyllactosamine repeats were detected at Asn38 and Asn83, while almost all of the di- and triantennary oligosaccharides were attached to Asn24. Batch analysis of different preparations of recombinant erythropoietin revealed the high reproducibility of the production procedure. Structures containing terminal GalNAc-GlcNAc were detected in small amounts in a few batches.     

Continuously chirped DFB gratings by specially bent waveguides fortunable lasers

We have implemented and studied a new type of tunable multiple-section semiconductor distributed feedback (DFB) laser using tailored chirped DFB gratings. Arbitrarily and continuously chirped DFB gratings are defined by bent waveguides on homogeneous grating fields with ultrahigh spatial precision. The mathematical bending functions are optimized in this case to provide enlarged wavelength tuning ranges. We present the results of model calculations, the technological device realization and experimental results of the DFB laser characterization e.g. a tuning range of 5.5 nm without wavelength gaps and high side mode suppression ratio     

The influence of preparation conditions on the electrochemical behaviour of CuO in a Li/CuO cell

A dozen CuO samples prepared under various conditions and from different starting materials were evaluated as cathode materials for a primary Li/CuO cell. The “thin electrode” method was used for rapid evaluation of the samples. Both coulombic efficiency and discharge voltage depend considerably on the method of synthesis. No correlation was found between the specific surface area and the resistivity of the samples on the one hand and the cathode performance on the other. Best results were obtained from CuO prepared by the oxidation of Cu₂O under controlled temperature and time of oxidation.     

BB_RADABA: a computer program as a tool for breeding and management of laboratory animals.

The use of well characterized laboratory animals in biomedical research is of importance for quality securing and reproducibility of animal experiments. Therefore, breeders should not only have in mind the reproduction of their animal stocks, but they should also be interested to achieve an optimal resemblance of the animals in the main traits characterizing them as a model of human diseases. Specific software applications which helps the breeders in monitoring the main breeding parameters, selecting suitable breeding pairs and data processing are practically not available. This prompted us to develop a computer program for management of breeding and experimental data, which we called BB_RADABA. In this report we want to give a short survey on this computer program.     

A tractable large-signal dynamic model-application to stronglycoupled distributed feedback lasers

The modulation characteristics of DFB semiconductor lasers have been studied using a transfer matrix method combined with an appropriate rate equation analysis. The model takes into account longitudinal mode spatial hole burning, as well as the nonuniform current injection resulting from the axially varying Fermi voltage, and can be used for the efficient simulation of static, small-signal, and large-signal dynamic properties. The program is applied to the interpretation of experimental data from a strongly coupled InGaAsP/InP DFB laser. The experimental high-frequency properties of this device are well described by the simulations