Lifting-based wavelet domain adaptive Wiener filter for image enhancement

A method of applying lifting-based wavelet domain Wiener filter (LBWDMF) in image enhancement is proposed. Lifting schemes have emerged as a powerful method for implementing biorthogonal wavelet filters. They exploit the similarity of the filter coefficients between the low-pass and high-pass filters to provide a higher speed of execution, compared to classical wavelet transforms. LBWDMF not only helps in reducing the number of computations but also achieves lossy to lossless performance with finite precision. The proposed method utilises the multi-scale characteristics of the wavelet transform and the local statistics of each subband. The proposed method transforms an image into the wavelet domain using lifting-based wavelet filters and then applies a Wiener filter in the wavelet domain and finally transforms the result into the spatial domain. When the peak signal-to-noise ratio (PSNR) is low, transforming an image to the lifting-based wavelet domain and applying the Wiener filter in the wavelet domain produces better results than directly applying Wiener filter in spatial domain. In other words each subband is processed independently in the wavelet domain by a Wiener filter. Moreover, in order to validate the effectiveness of the proposed method the result obtained using the proposed method is compared to those using the spatial domain Wiener filter (SDWF) and classical wavelet domain Wiener filter (CWDWF). Experimental results show that the proposed method has better performance over SDWF and CWDWF both visually and in terms of PSNR.     

Regional chemotherapy of liver tumors

In the absence of adequate autogenous vein for tibial artery bypass in limb salvage surgery, the use of prosthetic grafts with a distal anastomotic vein cuff or patch has shown promising results. Here, we describe how the Florester Internal Vessel Occluder (Meadox UK, Bedfordshire, UK) can facilitate the construction of a distal anastomotic vein cuff.     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Transplantectomy today: indications and complications

Analysis of the indications for transplantectomy and its complications over a 12-year period. Over a total of 159 failure grafts, we performed 53 transplantectomies (33.3%). The percentage of complications was 16.9%. Three patients died (5.6%) during the more or less immediate post-operative period. In our experience, consistent and prolonged maintenance of immunosuppression should avoid the need for transplantectomy in a high percentage of grafts. Only 15 transplantectomies were made on 104 failure grafts after 6 months (14.4%). Our short but successful experience with embolization of 2 rejected grafts confirms the validity of this conservative alternative versus conventional surgical transplantectomy in selected cases.     

Preparation and characterization of PVA/OMMT composites

In this study, polyvinyl alcohol/organically modified montmorillonite (HDA/MMT; organoclay) composite was prepared for the intercalation processes. Firstly, the rheological behavior of aqueous montmorillonite dispersions was investigated as a function of solid content. Hexadecylamine (HDA) was added to the montmorillonite dispersion (2%, w/w) in different concentrations in the range of 5 × 10^?4 – 9 × 10^?3 mmol/L. The basal spacing of the organoclay (OMMT) was studied by X‐ray diffraction. The FTIR spectra are obtained from the modified montmorillonite products, which revealed the characteristic absorbencies after treatment with HDA. HDA/MMT/PVA composite, which was produced by the reaction of 1 wt % PVA solution with organoclay complex, is characterized by the rheology, electrokinetic, XRD, FTIR, and SEM techniques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2315–2323, 2006     

Kinetics and phase evolution during carbothermal synthesis of titanium carbide from ultrafine titania/carbon mixture

The kinetics and phase evolution of the TiC formation process by carbothermal reduction of ultrafine titania/carbon mixture were investigated using thermogravimetric analysis (TGA), X-ray diffraction (XRD) and oxygen analysis. Titania (TiO2) first lowered its oxidation state to Ti3O5 via an unidentified phase (possibly one of the Magneli phases). Then Ti3O5 was further reduced to Ti2O3, followed by the formation of titanium oxycarbide (TiCxOy) phase and its purification toward high purity TiC thereafter. Ti2O3 was the oxide phase with the lowest oxidation state before forming TiCxOy phase. In the isothermal TGA trace, the formation of Ti3O5 showed a diffusion-controlled process; possibly carbon diffusion limited the solid state reaction. The formation of Ti2O3 and TiCxOy was interpreted to be associated with CO gas-assisted reduction reaction, based on constant reaction rate for each process. The activation energy for the formation of Ti2O3 (from Ti3O5) and TiCxOy (from Ti2O3) phase were calculated to be 415.6 and 264.3 kJ mol-1, respectively. The TiC powder synthesized at 1550 °C for 4 h in flowing argon atmosphere showed fine particle size (0.3–0.6 m) with oxygen content of 0.7 wt % and lattice parameter of 0.4328 nm while interparticle agglomeration was moderate. © 1998 Chapman & Hall.     

Multi-directional blending for heterogeneous objects

This paper presents a novel multi-directional blending method for heterogeneous object design. Contrary to earlier studies, this paper introduces material blending through multiple features with different heterogeneous material composition. Feature-based method is used to represent and design heterogeneous objects with multi-directional material composition. The Voronoi diagram of multiple curves is constructed to generate bisector of the geometric domain. Then, metamorphosis from the bounding curve to multiple internal curves is performed using dynamic programming based optimization approach in two steps. First, optimum curve matching between internal curves and enclosing Voronoi cells is obtained. Then, an optimum ruling line alignment and insertion technique between the Voronoi diagram and the bounding curve is developed. Metamorphosis through complex concavities is also achieved. Finally, multi-directional material composition is mapped based on a set of relations.     

Microplane Model M5 with Kinematic and Static Constraints for Concrete Fracture and Anelasticity. I: Theory

Presented is a new microplane model for concrete, labeled M5, which improves the representation of tensile cohesive fracture by eliminating spurious excessive lateral strains and stress locking for far postpeak tensile strains. To achieve improvement, a kinematically constrained microplane system simulating hardening nonlinear behavior (nearly identical to previous Model M4 stripped of tensile softening) is coupled in series with a statically constrained microplane system simulating solely the cohesive tensile fracture. This coupling is made possible by developing a new iterative algorithm and by proving the conditions of its convergence. The special aspect of this algorithm (contrasting with the classical return mapping algorithm for hardening plasticity) is that the cohesive softening stiffness matrix (which is not positive definite) is used as the predictor and the hardening stiffness matrix as the corrector. The softening cohesive stiffness for fracturing is related to the fracture energy of concrete and the effective crack spacing. The postpeak softening slopes on the microplanes can be adjusted according to the element size in the sense of the crack band model. Finally, an incremental thermodynamic potential for the coupling of statically and kinematically constrained microplane systems is formulated. The data fitting and experimental calibration for tensile strain softening are relegated to a subsequent paper in this issue, while all the nonlinear triaxial response in compression remains the same as for Model M4.     

Complex assembly variant design in agile manufacturing. Part I: System architecture and assembly modeling methodology

In the distributed and horizontally integrated manufacturing environment found in agile manufacturing, there is a great demand for new product development methods that are capable of generating new customized assembly designs based on mature component designs that might be dispersed at geographically distributed partner sites. To cater for this demand, this paper addresses the methodology for complex assembly variant design in agile manufacturing. It consists in fundamental research in two parts: (i) assembly modeling; and (ii) assembly variant design methodology. This paper, the first of a two-part series, presents the assembly variant design system architecture and the assembly modeling methodology. First, a complementary assembly modeling concept is proposed with two kinds of assembly models, the hierarchical assembly model and the relational assembly model. The first explicitly captures the hierarchical and functional relationships between constituent components whereas the second explicitly captures the mating relationships at the form-feature-level. These models are complementary in the sense that each of them models only a specific aspect of assembly-related information but together they include the required assembly-related information. They are further specialized to accommodate the features of assembly variant design. As a result, two kinds of assembly models, the assembly variants model and the assembly mating graph are generated. These assembly models serve as the basis for assembly variant design which is discussed in the companion paper.