Histone Methylation Marks on Circulating Nucleosomes as Novel Blood-Based Biomarker in Colorectal Cancer

Circulating nucleic acids (CNAs) are under investigation as a liquid biopsy in cancer as potential non-invasive biomarkers, as stable structure in circulation nucleosomes could be valuable sources for detection of cancer-specific alterations in histone modifications. Our interest is in histone methylation marks with a focus on colorectal cancer, one of the leading cancers respective the incidence and mortality. Our previous work included the analysis of trimethylations of lysine 9 on histone 3 (H3K9me3) and of lysine 20 on histone 4 (H4K20me3) by chromatin immuno- precipitation-related PCR in circulating nucleosomes. Here we asked whether global immunologic measurement of histone marks in circulation could be a suitable approach to show their potential as biomarkers. In addition to H3K9me3 and H4K20me3 we also measured H3K27me3 in plasma samples from CRC patients (n = 63) and cancer free individuals (n = 40) by ELISA-based methylation assays. Our results show that of three marks, the amounts of H3K27me3 (p = 0.04) and H4K20me3 (p < 0.001) were significantly lower in CRC patients than in healthy controls. For H3K9me3 similar amounts were measured in both groups. Areas under the curve (AUC) in receiver operating characteristic (ROC) curves indicating the power of CRC detection were 0.620 for H3K27me3, 0.715 for H4K20me3 and 0.769 for the combination of both markers. In conclusion, findings of this preliminary study reveal the potential of blood-based detection of CRC by quantification of histone methylation marks and the additive effect of the marker combination.     

Possibilities and problems with the use of models as a communication tool in water resource management

Politicians and policy-makers, as well as modellers, often nurses an expectation that model derived results is an objective source of information that can be used to support decisions. However, several prerequisites have to be dealt with in order to ensure that models can be used as legitimate and efficient tools in water resource management. Based on empirical material from recent studies on the use of models in stakeholder dialogues, mainly focusing on catchment nutrient transport, two central problems are identified: (a) Models are laden with choices and thus depend on assumptions and priorities of modellers. (b) There are several factors that influence ability and willingness of stakeholders (as information recovers) to criticize or accept results of the modelling exercise. Recognized factors likely to influence stakeholders' acceptance of model derived results include issues at stake, stakeholders' ability to criticize model derived information, and their trust in the institutions that have developed or applied the used models. Identified prerequisites for successful use of models in integrated water resource management include: consideration of user relevance, awareness of and preparedness to handle constraints linked to communication of model-based results, transparency of used models and data and of involved uncertainties, mutual respect between experts and stakeholders and between involved stakeholder groups, a robust institutional network, and sufficient time for dialogues. Development and use of strategies for participatory modelling, based on a continuous dialogue between experts and stakeholders is recommended as a way to facilitate that the prerequisites for a successful use of models in water resource management are fulfilled.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

Variance sensitive adaptive threshold-based PCA method for fault detection with experimental application

Principal Component Analysis (PCA) is a statistical process monitoring technique that has been widely used in industrial applications. PCA methods for Fault Detection (FD) use data collected from a steady-state process to monitor T² and Q statistics with a fixed threshold. For the systems where transient values of the processes must be taken into account, the usage of a fixed threshold in PCA method causes false alarms and missing data that significantly compromise the reliability of the monitoring systems. In the present article, a new PCA method based on variance sensitive adaptive threshold (T_vsa) is proposed to overcome false alarms which occur in the transient states according to changing process conditions and the missing data problem. The proposed method is implemented and validated experimentally on an electromechanical system. The method is compared with the conventional monitoring methods. Experimental tests and tabulated results confirm the fact that the proposed method is applicable and effective for both the steady-state and transient operations and gives early warning to operators.     

Functional Diversity,Absorptive Capability and Product Success: The Moderating Role of Project Complexity in New Product Development Teams

Absorptive capability appears to be an appealing concept in the technology and innovation management literature. Though absorptive capability attracts researchers from a variety of disciplines, team‐level empirical research on it is scant. In this study, we operationalized team absorptive capability as a multidimensional construct involving knowledge acquisition, assimilation and exploitation. This study also explores the moderating effect of project complexity between team absorptive capability and new product success. In studying the data from 239 new product development projects using partial least squares structural equation modelling, we found that team functional diversity is a significant determinant of team absorptive capability. Moreover, regarding the relationships between team absorptive capability and new product success, we uncovered that (i) new product success is dependent on the ability to understand the acquired knowledge, and (ii) the teams appear to be more cautious in putting the assimilated knowledge into practice to the extent that project complexity increases.     

The influence of nitrogen doping on reduced graphene oxide as highly cyclable Li-ion battery anode with enhanced performance

A straightforward, one-step route has been established to fabricate reduced- (rGO) and nitrogen-doped reduced graphene oxide (NrGO) with remarkable lithium-ion storage properties. The graphene oxide (GO) was synthesized as starting material by improved Hummers’ method. Thereafter, thermally annealing GO with NH₃ at elevated temperature to synthesize NrGO was yielded a more open structure with nitrogen sites suitable for enhanced Li intercalation. NrGO exhibited a reversible capacity of 240 mAhg^?1 at 10 Ag^-1 after 500 cycles with 90% capacity retention, which is the best result achieved among graphene oxide-based anodes at this current density. In contrast to rGO, NrGO cells exhibited a gradually increasing capacity profile, reaching up to 114% of the initial capacity at 0.1, 2, and 10 Ag^-1 current densities. Results showed that high occupancy of pyridinic N within NrGO enhanced battery performance and cell kinetics upon cycling which offers long-time operability at high current density.     

Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs

In the present work, six new kinds of building composite PCMs (BCPCMs), PS/octadecane, BC/octadecane, PS/CA–MA, BC/CA–MA, PS/PEG1000, and BC/PEG1000 composites, were prepared by using vacuum impregnation method. The maximum percent of PCM in the composites was assigned to be 12, 13, 18, 23, 30, and 42 wt%, respectively. The form‐stable BCPCMs were characterized using SEM, FT‐IR, DSC, and TG analysis techniques. The characterization results showed the existence of homogenous dispersion of the PCM into the PBM matrixes. The DSC measurements indicated that the melting temperatures of the form‐stable BCPCMs are in the range of 20–33°C while they have latent heats of melting in the range of about 28–55 J/g. These results make them promising BCPCMs for low temperature‐passive TES applications in buildings. Thermal cycling test indicated that the prepared BCPCMs have good thermal reliability and chemical stability. TG analysis proved that the prepared BCPCMs have good thermal durability. In addition, the thermal conductivity of BCPCMs was enhanced considerably by addition of expanded graphite (EG). The improvement in thermal conductivity of the BCPCMs caused appreciably reduction in their melting times. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization of nanocomposite resol resins: Individual/synergist effects of alendronic acid and sepiolite

Alendronic acid modified resol nanocomposite resins (AA‐PFNCRs) and sepiolite modified resol nanocomposite resins (SEP‐PFNCRs) have been synthesized by in situ method in the presence of base catalyst. Additionally, the synergistic effects of alendronic acid and sepiolite clay (AA‐SEP‐PFNCR) on the resol resin have been studied. The structure, morphology, and thermal properties of these nanocomposites have been investigated by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and X‐ray Diffraction (XRD). The results demonstrated the interactions between the fillers and resol resin. Thermal properties of nanocomposite resins were improved due to alendronic acid and sepiolite. The obtained samples were also characterized morphologically by Scanning Electron Microscope (SEM). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43807.     

Quasistatic TEM characteristics of overlayed supported asymmetric coplanar waveguides

CAD-oriented analytic formulas are presented for calculating the quasistatic TEM parameters of the overlayed supported asymmetric coplanar waveguides (OSACPW). The effect of the thicknesses and the dielectric constants of the overlaying and supporting materials on the quasistatic parameters has been investigated by using the expressions derived by the conformal mapping techniques. Comparisons have also been made between this article's results and the results available in the literature for the conventional coplanar waveguide (CPW) and the asymmetric coplanar waveguide (ACPW). It has been shown that the present formulas can also be used for calculating the quasistatic TEM parameters of the line structures such as the open, the open supported, and the overlayed supported CPW or ACPW. © 1996 John Wiley & Sons, Inc.