Indoor heterogeneous photochemistry of furfural drives emissions of nitrous acid

People spend approximately 80% of their time indoor, making the understanding of the indoor chemistry an important task for safety. The high surface-area-to-volume ratio characteristic of indoor environments leads the semi-volatile organic compounds (sVOCs) to deposit on the surfaces. Using a long path absorption photometer (LOPAP), this work investigates the formation of nitrous acid (HONO) through the photochemistry of adsorbed nitrate anions and its enhancement by the presence of furfural. Using a high-resolution proton-transfer-reaction time-of-flight mass spectrometer (PTR-TOF-MS), this work also investigates the surface emissions of VOCs from irradiated films of furfural and a mix of furfural and nitrate anions. Among the emitted VOCs, 2(5H)-furanone/2-Butenedial was observed at high concentrations, leading to maleic anhydride formation after UV irradiation. Moreover, the addition of potassium nitrate to the film formed NO_x and HONO concentrations up to 10 ppb, which scales to ca. 4 ppb for realistic indoor conditions. This work helps to understand the high levels of HONO and NO_x measured indoors.     

The hot compaction behaviour of woven oriented polypropylene fibres and tapes. I. Mechanical properties

The aim of this work was to establish the important parameters that control the hot compaction behaviour of woven oriented polypropylene. Five commercial woven cloths, based on four different polypropylene polymers, were selected so that the perceived important variables could be studied. These include the mechanical properties of the original oriented tapes or fibres, the geometry of the oriented reinforcement (fibres or tapes), the mechanical properties of the base polymer (which are crucially dependant on the molecular weight and morphology), and the weave style. The five cloths were chosen so as to explore the boundaries of these various parameters, i.e. low and high molecular weight: circular or rectangular reinforcement (fibres or tapes): low or high tape initial orientation: coarse or fine weave.A vital aspect of this study was the realisation that hot compacted polypropylene could be envisaged as a composite, comprising an oriented ‘reinforcement’ bound together by a matrix phase, formed by melting and recrystallisation of the original oriented material. We have established the crucial importance of the properties of the melted and recrystallised matrix phase, especially the level of ductility, in controlling the properties of the hot compacted composite.     

Picosecond photodiffraction in semiconductor multiquantum wells and microcavities

We study the transient gratings photogenerated in the picosecond regime in three families of structures, namely : - structures of thickness in the order of one micron, including quantum wells (GaAs/GaAlAs, CdTe/ CdZnTe). A transmission modulation due to the electric field has been observed. We show that, in accordance with our calculations, this modulation is screened faster than 10 ps at a fluence of a few µJ/cm2. - A structure including GalnAs/GalnAsP MQWS in a cavity. This structure shows a top diffraction efficiency of 2.5 × 10-² at 1.55 µm for an energy of excitation in the order of 100 µJ/cm2. The diffraction efficiency exhibits several oscillations due to Fabry-Pårot effects. By introducing cavity effects in our model, we show that the diffraction efficiency is amplified by more than a factor 2 with respect to the no-cavity case. Calculations show that the diffraction efficiency may reach 6 × 10-² around 1.625 µm, for a front mirror reflectivity of 90 %. - Structures including bulk GaAs microcavities. The risetime is lower or in the order of 1 ps while the diffraction efficiency attains 1 %, with an average power of 4 mW (i.e. an energy of 2 µJ/cm²/pulse), compatible with a commutation of packets at 80 MHz.     

Scopolamine impairs human recognition memory: Data and modeling.

Eight subjects studied a set of complex visual images after administration of 0.4 mg scopolamine. Another 8 subjects performed the same task without drug administration. On a subsequent item recognition test, subjects rated, on a 5-point scale, their confidence that the studied pictures and an equal number of unstudied lures were actually presented. Results showed that scopolamine affected responses to studied items, but not unstudied lures, demonstrating an unambiguous effect of scopolamine on recognition memory. To describe the scopolamine-injected subjects' data, the authors constructed a new model of 2-process recognition that includes the A. P. Yonelinas (1994) model as a limiting case. The model analysis suggests that scopolamine affected both familiarity and recollection. In particular, scopolamine did not affect the frequency with which recollection took place, but rather, affected the amount of recollected information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Statistical studies of branched ester latex and paint properties

Vinyl versatate, butyl acrylate and 2-ethylhexyl acrylate were compared as comonomer, for colloid-stabilized vinyl acetate latex polymers to assess their impact on latex coating properties. Vinyl versatate afforded advantages in scrub resistance, gloss, hydrophobicity and higher glass transition temperatures. Butyl acrylate developed better wet adhesion efficiency, gel content and hiding efficiency. 2-Ethylhexyl acrylate offered performance comparable to butyl acrylate in hiding efficiency, lowering copolymer glass transition temperatures, and gloss development. Combinations of these monomers, in many instances, afforded a better balance of performance properties than individual monomers alone. In the subject study, a simplex-centroid design was utilized to statistically map polymer compositions for determining the effect of comonomer composition on latex and paint film properties. In addition to developing contour maps of polymer and paint properties as a function of composition, a technique for studying structure-property relationships is presented.     

Identification of leek-moth and diamondback-moth frass volatiles that stimulate parasitoid,Diadromus pulchellus

Acrolepiopsis assectella andPlutella xylostella frass volatiles, trapped on Tenax GC, were examined by capillary gas chromatography. In both moths, the same three disulfides, dimethyl, dipropyl, and methyl propyl, were the most abundant substances, but in different proportions. The synthetic disulfides elicited the same behavioral response by the parasitoid,Diadromus pulchellus as frass. The plant origin of these substances is discussed.     

Synthesis of Organotin Polyamine Ethers Containing Acyclovir and their Preliminary Anticancer and Antiviral Activity

Organotin polyamine ethers containing acyclovir in their backbone were synthesized in moderate to high yield employing the aqueous interfacial polycondensation system. The products are high molecular weight polymers. Infrared spectroscopy of the products shows new bands characteristic of the formation of Sn–N and Sn–O bonds consistent with the proposed structure. MALDI-TOF MS below 2000 Da shows the presence of organotin and acyclovir units containing these two moieties. The products show moderate inhibition of a number of cancer cell lines and exhibit the ability to inhibit a number of viruses, particularly the herpes simplex virus-1 and varicella zoster virus that are responsible for herpes, chicken pox and shingles.     

Design and fabrication of 3D‐plotted polymeric scaffolds in functional tissue engineering

Regenerating the load‐bearing tissues requires 3D scaffolds that balance the temporary mechanical function with the biological requirements. In functional tissue engineering, designing scaffolds with biomimetic mechanical properties could promote tissue ingrowth since the cells are sensitive to their local mechanical environment. This work aims to design scaffolds that mimic the mechanical response of the biological tissues under physiological loading conditions. Poly(L ‐lactide) (PLLA) scaffolds with varying porosities and pore sizes were made by the 3D‐plotting technique. The scaffolds were tested under unconfined ramp compression to compare their stress profile under load with that of bovine cartilage. A comparison between the material parameters estimated for the scaffolds and for the bovine cartilage based on the biphasic theory enabled the definition of an optimum window for the porosity and pore size of these constructs. Moreover, the finite element prediction for the stress distribution inside the scaffolds, surrounded by the host cartilaginous tissue, demonstrated a negligible perturbation of the stress field at the site of implantation. The finite element modeling tools in combination with the developed methodology for optimal porosity/pore size determination can be used to improve the design of biomimetic scaffolds. POLYM. ENG. SCI., 47:608–618, 2007. © 2007 Society of Plastics Engineers.