XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Assessment of Bonelike® graft with a resorbable matrix using an animal model

Synthetic bone grafts have been developed to provide an alternative to autografts and allografts. Bonelike® is a patented synthetic osteoconductive bone graft that mimics the mineral composition of natural bone. In the present preliminary animal studies a user-friendly version of synthetic bone graft Bonelike® have been developed by using a resorbable matrix, Floseal®, as a vehicle and raloxifene hydrochloride as a therapeutic molecule, that is known to decrease osteoclast activity and therefore enhanced bone formation. From histological and scanning electron microscopy evaluations, the use of Bonelike® associated with Floseal® and raloxifene hydrochloride showed that new bone was rapidly apposed on implanted granules and also that the presence of the matrix and therapeutic molecule does not alter the proven highly osteoconductivity properties of Bonelike®. Therefore, this association may be one step-forward for the clinical applications of Bonelike® scaffolds since it is much more easy-to-handle when compared to granular materials.     

Alarm pheromone system of leaf-footed bugLeptoglossus zonatus (Heteroptera: Coreidae)

The alarm pheromone system ofLeptoglossus zonatus (Dallas) adults was shown to be composed of hexyl acetate, hexanol, hexanal, and hexanoic acid. Single components tested in the field elicited dispersive behavior of over 70% of adults. 2-(E)-Hexenal, found in the secretion of nymphs, but not in the exudates of adults, was also active against adults. In addition, first-instar nymphs responded to the four components of the alarm pheromone of adults as well as to 2-(E)-hexenal, a component of their own alarm pheromone system. Adults and nymphs possess different alarm pheromone systems, which are not specific to their own life stage. That hemipteran alarm pheromone systems are not species-specific was supported by the fact that both adult and nymphL. zonatus responded to butanoic acid, an alarm pheromone of Alydidae, which was not found in this Coreidae species.     

Quantum Phase Transition in the BCS-to-BEC Evolution of p-wave Fermi Gases

We discuss the possibility of a quantum phase transition in ultra-cold spin-polarized Fermi gases which exhibit a p-wave Feshbach resonance. We show that when fermionic atoms form a condensate that can be externally tuned between the BCS and BEC limits, the zero temperature compressibility and the spin susceptibility of the fermionic gas are non-analytic functions of the two-body bound state energy. This non-analyticity is due to a massive rearrangement of the momentum distribution in the ground state of the system. Furthermore, we show that the low temperature superfluid density is also non-analytic and exhibits a dramatic change in behavior when the critical value of the bound state energy is crossed.     

Functionalized Hydrogels for Cartilage Repair: The Value of Secretome-Instructive Signaling

Cartilage repair has been a challenge in the medical field for many years. Although treatments that alleviate pain and injury are available, none can effectively regenerate the cartilage. Currently, regenerative medicine and tissue engineering are among the developed strategies to treat cartilage injury. The use of stem cells, associated or not with scaffolds, has shown potential in cartilage regeneration. However, it is currently known that the effect of stem cells occurs mainly through the secretion of paracrine factors that act on local cells. In this review, we will address the use of the secretome—a set of bioactive factors (soluble factors and extracellular vesicles) secreted by the cells—of mesenchymal stem cells as a treatment for cartilage regeneration. We will also discuss methodologies for priming the secretome to enhance the chondroregenerative potential. In addition, considering the difficulty of delivering therapies to the injured cartilage site, we will address works that use hydrogels functionalized with growth factors and secretome components. We aim to show that secretome-functionalized hydrogels can be an exciting approach to cell-free cartilage repair therapy.     

Circadian Rhythm Dysregulation and Leukemia Development: The Role of Clock Genes as Promising Biomarkers

The circadian clock (CC) is a daily system that regulates the oscillations of physiological processes and can respond to the external environment in order to maintain internal homeostasis. For the functioning of the CC, the clock genes (CG) act in different metabolic pathways through the clock-controlled genes (CCG), providing cellular regulation. The CC’s interruption can result in the development of different diseases, such as neurodegenerative and metabolic disorders, as well as cancer. Leukemias correspond to a group of malignancies of the blood and bone marrow that occur when alterations in normal cellular regulatory processes cause the uncontrolled proliferation of hematopoietic stem cells. This review aimed to associate a deregulated CC with the manifestation of leukemia, looking for possible pathways involving CG and their possible role as leukemic biomarkers.     

Acid catalyst influence on the polymerization time of polyfurfuryl alcohol and on the porosity of monolithic vitreous carbon

This study compares the influence of different acid catalysts on the polymerization rate of polyfurfuryl alcohol (PFA) precursor and especially on the respective porosity of Monolithic Vitreous Carbon (MVC) produced from that. Five acid catalysts commonly used were compared: p‐toluenesulfonic (PTLS), hydrochloric, sulfuric, nitric, and phosphoric. A fixed molar concentration of catalyst was diluted in PFA resin under room pressure and temperature. The time dependence of PFA resin polymerization was investigated by optical transmittance of PFA films, and the polymerization degree, characterized by ATR spectroscopy and thermogravimetry. MVC samples prepared with the same PFA resin and each catalyst were carbonized up to 1200 °C, under inert atmosphere. MVC porosity was studied by nitrogen adsorption/desorption, and by SEM and optical microscopy. Higher polymerization degree and higher residual mass were obtained with faster catalysts. No direct relation between the polymerization rate and the acid force was observed. PTLS promoted the fastest PFA polymerization process and the sulfuric acid, the slowest one. MVC samples were obtained by slow carbonization. MVC presented low specific surface S_BET from 1.4 to 7.4 m²/g. Nitric acid catalyst contributed the most to micropores formation. Micrometric apparent porosity was smaller for the catalysts having longer polymerizations times, such as phosphoric and sulfuric acid. Phosphoric catalyst corresponded to the lowest porosity in MVC. As the polymerization time increased, the average size of the micrometric surface pores tended to augment. The MVC macroscopic porosity increased with the S_BET increment. Acid catalysts choice exerted a fundamental role on the porosity of MVC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43272.     

Cold Atmospheric Plasma Apoptotic and Oxidative Effects on MCF7 and HCC1806 Human Breast Cancer Cells

Breast cancer (BC) is a malignant neoplasia with the highest incidence and mortality rates in women worldwide. Currently, therapies include surgery, radiotherapy, and chemotherapy, including targeted therapies in some cases. However, treatments are often associated with serious adverse effects. Looking for new options in BC treatment, we evaluated the therapeutic potential of cold atmospheric plasma (CAP) in two cell lines (MCF7 and HCC1806) with distinct histological features. Apoptosis seemed to be the most prevalent type of death, as corroborated by several biochemical features, including phosphatidylserine exposure, the disruption of mitochondrial membrane potential, an increase in BAX/BCL2 ratio and procaspase 3 loss. Moreover, the accumulation of cells in the G2/M phase of the cell cycle points to the loss of replication ability and decreased survival. Despite reported toxic concentrations of peroxides in culture media exposed to plasma, intracellular peroxide concentration was overall decreased accompanying a reduction in GSH levels shortly after plasma exposure in both cell lines. In HCC1806, elevated nitric oxide (NO) concentration accompanied by reduced superoxide levels suggests that these cells are capable of converting plasma-derived nitrites into NO that competes with superoxide dismutase (SOD) for superoxide to form peroxinitrite. The concomitant inhibition of the antioxidative activity of cells during CAP treatment, particularly the inhibition of cytochrome c oxidase with sodium azide, synergistically increased plasma toxicity. Thus, this in vitro research enlightens the therapeutic potential of CAP in the treatment of breast cancer, elucidating its possible mechanisms of action.     

Survey and comparison of message authentication solutions on wireless sensor networks

Security is an important concern in any modern network. This also applies to Wireless Sensor Networks (WSNs), especially those used in applications that monitor sensitive information (e.g., health care applications). However, the highly constrained nature of sensors imposes a difficult challenge: their reduced availability of memory, processing power and energy hinders the deployment of many modern cryptographic algorithms considered secure. For this reason, the choice of the most memory-, processing- and energy-efficient security solutions is of vital importance in WSNs. To date, a number of extensive analyses comparing different encryption algorithms and key management schemes have been developed, while very little attention has been given to message authentication solutions. In this paper, aiming to close this gap, we identify cipher-based Message Authentication Codes (MACs) and Authenticated Encryption with Associated Data (AEAD) schemes suitable for WSNs and then evaluate their features and performance on a real platform (TelosB). As a result of this analysis, we identify the recommended choices depending on the characteristics of the target network and available hardware.     

Partial oxidation of methane over bimetallic nickel–lanthanide oxides

The study of partial oxidation of methane (POM) over bimetallic nickel–lanthanide oxides was undertaken. Binary intermetallic compounds of the type LnNi (Ln = Pr, Gd, Lu) were used as bimetallic nickel–lanthanide oxides precursors and the products (NiO·Pr₂NiO₄, 2NiO·Gd₂O₃ and 2NiO·Lu₂O₃) were characterized by means of X-ray diffraction, X-ray photoelectron spectroscopy, Raman and temperature programmed reduction. The catalytic activity increases when gadolinium or lutetium replaces praseodymium and the selectivity of the bimetallic nickel–lanthanide oxides is clearly different from that of single metal oxides and/or mechanical mixtures.The existence of an unusual synergism effect between the two metal oxide phases (NiO and Ln₂O₃) that lead to higher conversions of methane and higher selectivities to hydrogen and carbon monoxide correlate also the catalysts stability to deactivation. The activity and selectivity of the gadolinium and lutetium compounds is, under the same conditions, equivalent to that of a platinum commercial catalyst, 5 wt% Pt/Al₂O₃, which stresses the good catalytic performance of this new type of compounds for the production of H₂ and CO (H₂/CO = 2).