Sinusoidal disturbance rejection in chaotic planar oscillators

The main goal of this paper is to design a compensator able to restore the nominal behavior of a planar system, which is rendered chaotic by an unmeasurable sinusoidal disturbance input. To reach such a goal, some instruments, taken from algebraic geometry, are used to estimate the unmeasurable disturbance from the time derivatives of the output of the system and of the control input. Copyright © 2015 John Wiley & Sons, Ltd.     

Electrical and optical properties of semi-insulating polycrystalline silicon thin films: the role of microstructure and doping

We have investigated the relationship between microstructure and electrical conductivity in semi-insulating polycrystalline silicon (SIPOS) with oxygen concentrations in the 2–35 at.% range and the effect of doping with boron, phosphorus, arsenic and erbium by ion implantation. SIPOS thin films are mixtures of silicon and silicon oxide phases. The chemical and morphological evolution of these phases upon annealing is emphasized. Electrical conductivity measurements are interpreted in terms of a physical model containing few free parameters related to the material microstructure. A direct extension of this model explains also the conductivity increase in SIPOS doped with elements of the third or the fifth group. In the last part of the paper, data of electroluminescence at 1.54 μm in Er-implanted SIPOS due to intra-4f transitions of the Er³⁺ ion are shown and discussed.     

Stick-slip vibrations of a two degree-of-freedom geophysical fault model

This paper considers the behaviour of a two degree-of-freedom autonomous system with static and dynamic friction consisting of two blocks linked by springs on a moving belt. This system is the simplest model which has been used to simulate the dynamics of seismic faults. The friction force is assumed to be a decreasing function of the relative sliding velocity. The motion of the blocks is composed of a uniform stick motion, during which the divergence of the system is zero, and an accelerated slip motion, during which the divergence is positive. The mathematical model by definition concentrates the dissipation on the point where the slip motion ceases. It is assumed that slip occurs only in one direction. A three-dimensional Poincaré map and a scalar single variable map are discussed which characterize the dynamics of the system in a simple way. The one-dimensional map can be used to diagnose the chaotic behaviour of the full system, and quantities, similar to Lyapunov exponents, can be easily calculated which provide information regarding the system-sensitive dependence on initial conditions. The system dynamics illustrate the idea of studying the earthquake generation mechanism as a chaotic phenomenon.     

Silver electrodeposition from air and water-stable ionic liquid: An environmentally friendly alternative to cyanide baths

The influence of temperature on the kinetics and the morphology of silver deposits obtained from an air and water-stable ionic liquid (the 1-butyl-3-methyl imidazolium tetrafluoroborate) was studied by means of cyclic voltammetry and chronoamperometry. The nucleation and growth mechanisms have been investigated and the effect of temperature evaluated up to 200 °C. Dense, pure and very thin (about 0.3 μm) silver coatings, with decorative properties, have been obtained on commercial copper electrodes at different temperatures. The characterization of the deposits morphology has been performed by visual investigation and SEM microscopy. Data about thickness were acquired by Calotest® measurements. The deposits result constituted by pure silver as determined by combination of EDX microanalysis and Auger Electron Spectroscopy (AES). The deposition method promises to be a new, environmentally friendly, method for silver electrodeposition which is the reason for the absence of cyanide and volatile toxic solvents in the electroplating bath.     

Physics-Based Correction of Extracted Conductance Parameters of Nonlinear Microwave Semiconductor Devices

Nonlinear models of microwave semiconductor devices are usually evaluated from small-signal high-frequency measurements of differential parameters, performed at many bias points. A linear equivalent circuit is extracted at each bias point, and this is used to construct the nonlinear model. This procedure does not take into account the effects of slow phenomena as heating of the semiconductor or trapping/detrapping of carriers, produced by biasing. Thus, the parameters extracted from multi-bias S-parameter measurements do not fulfill simple consistency requirements. This paper presents a new method to extract a dynamic model from the measurements of the S-parameters through a physics-based correction of the extracted conductance parameters.     

Recognition of Adulterated Oils by Direct Analysis of the Minor Components

Recognition of adulteration by other oils via direct analysis of the minor components (“sterol fraction”) is shown for olive oil. 10 % of various oils were admixed, the free alcohols silylated and the minor components analyzed by on-line coupled LC-GC-FID. For most oils, even smaller additions can be recognized. Admixed oils can no longer be determined, however, if their minor components have been removed by strong raffination. Bleaching of rapeseed oil with 7% of earth at 180 °C, in fact, completely removed free and esterified sterols.     

Gamma irradiation of PolyEthyleneTerephthalate and PolyEthyleneNaphthalate

The effect of gamma irradiation in air is investigated in two thermoplastic polyesters (PET and PEN), in order to evaluate the influence of aromatic density and the role of oxygen on radiation resistance. EPR measurements were carried out to detect radical stability against oxygen permeation and to provide radical characterization. Viscometric data reveal a different behaviour between films and thick samples. Positron annihilation spectra show a decrease of ortho-positronium intensity, which is more marked in film samples. ortho-positronium lifetime does not depend on the radiation dose.     

Deep-MEG: spatiotemporal CNN features and multiband ensemble classification for predicting the early signs of Alzheimer’s disease with magnetoencephalography

Neural Computing and Applications - In this paper, we present the novel Deep-MEG approach in which image-based representations of magnetoencephalography (MEG) data are combined with ensemble...     

Sulfur containing polymers

Summary Copolymers containing -S-CO-S-and/or -O-CO-S-groups have been synthesized mainly by interfacial polycondensation.Different chemical structures were obtained by reacting 1,3-benzene dithiol (BDT) respectively with phosgene alone, phosgene and bisphenol-A (BPA), bischloroformate of BPA, BPA polycarbonate oligomers and by reacting phosgene with the products of BPA polycarbonate degraded with BDT. The chemical structures of the copolymers were investigated by IR, ¹H-NMR and ¹³C-NMR; molecular weights were determined by viscometry and vapor pressure osmometry. Although no attempt was made to find the optimum conditions for high molecular weight, some copolymers with fairly high mol. weight were obtained.