High-frequency analysis of the Ellipticus antenna

Efficient numerical solution techniques have been developed and used to examine the electromagnetic fields that can be developed in the working volume of the CW Ellipticus antenna operated at frequencies from 100 kHz to 1 GHz. An exponentially tapered transition section is designed to obtain the desired illumination pattern in the working volume. The input transition section is needed for impedance matching and to drive efficiently the Ellipticus antenna. A parametric study is performed to ascertain the performance of the Ellipticus antenna for frequencies up to 1 GHz     

Langmuir-Blodgett deposited cadmium gate inverted InP-GaInAs modulation-doped field-effect transistors

We report on the Langmuir-Blodgett film deposition and plasma etching of cadmium distearate on n-Gao.47Ino.53As to form a high-barrier-height Schottky barrier. Using this technique to form the gate electrode, we fabricated a 1?m-gate-length inverted InP-GalnAs modulation-doped field-effect transistor (MODFET) with an extrinsic transconductance of 170mS/mm and a cutoff frequencyfT of 19 GHz.     

The effects of lead exposure on learning in a multiple repeated acquisition and performance schedule

This study sought to determine the selectivity of Pb-induced changes in learning, as distinct from non-specific or performance effects, and to explore the nature of the underlying error patterns contributing to any learning deficits. To accomplish this, rats were chronically exposed to 0, 50, or 250 ppm Pb acetate in drinking water from weaning and trained on a multiple repeated acquisition (RA) and performance (P) schedule beginning at 55 days of age. The RA component required the rat to learn a new 3-member sequence of responses during each experimental session (Center Right Left, RLC, CLR, RCL, and LRC), while the correct sequence of responses for the P component was constant across sessions (LCR). Significant decrements in accuracy on the RA component but not on the P component were found in Pb-exposed groups compared to control, effects that could not be attributed to differential rates of responding. Analyses of error patterns revealed that the effects of Pb exposure on RA accuracy levels derived from two sources. The first consisted of a perseveration of P-like sequence responding (LCR) even during the RA component. Secondly, Pb exposure increased perseverative responding on a single lever, even though the schedule itself never directly reinforced such repetitive responding. The increase in frequency of these two types of perseverative behavior was incompatible with acquisition of non P-like sequences during the RA component. Adding a 5 sec tone to the light stimuli signalling the transition between RA and P components of the multiple schedule failed to attenuate these effects of Pb, suggesting that deficits in stimulus control were not the sole behavioral mechanism of these impairments. Examination of individual data revealed the presence of both 'learners' and 'non-learners' in each group, with the prevalence of the latter being suggestively higher in Pb-exposed groups than in controls. These findings may be relevant to the classroom setting, where periods requiring learning may frequently be interspersed with periods of performance of learned skills.     

Motion of a solid sphere in a general flow near a plane boundary at zero Reynolds number

It is demonstrated how the hydrodynamic force and moment of force acting on a solid sphere may be calculated when it is placed at rest at an arbitrary position in a two dimensional flow at zero Reynolds number in which the region of flow is bounded by either an undeformable planar free surface or by a plane solid wall. The results so obtained are used to calculate the motion of a freely moving solid sphere in an asymmetric vortex in the presence of an underformable free surface. It is seen that the sphere, depending on the direction of the undisturbed flow, will either spiral into or out of the vortex. This implies that when a dilute suspension of such spherical particles undergoes such a vortex motion in the presence of the free surface, the vortex will either fill up with particles from the surrounding flow or become devoid of particles.Deceased, July 31, 1995     

The domain composition method applied to Poisson's equation in two dimensions

Domain composition, a recently described method for formulating continuum field problems, removes certain restrictions on the construction of finite element models such that it is possible to solve a finite element problem without using a global compatible mesh. The domain composition method couples or otherwise constrains meshes in local regions to obtain a solution equivalent to that produced by conventional finite element methods. In particular, the domain composition method enables finite element models to be formulated with overlapping elements. Several advantages come from this, including an ability to automatically generate a finite element model from a solid geometric model, an ability to use a variety of element types in a single finite element model and an ability to exactly match element boundaries to the local geometry. This paper shows in detail a finite element formulation of Poisson's equation using domain composition and presents certain key algorithms that incorporate the domain composition method into well-established finite element procedures.     

DMD-specific FISH probes are diagnostically useful in the detection of female carriers of DMD gene deletions

The challenge of Duchenne muscular dystrophy (DMD) carrier identification resides in the ability to identify the presence of a mutant gene over the background contributed by the normal allele. Current diagnosis of carrier status when a deletion has been identified in a proband is based on an analysis of a gene dosage. We present a diagnostic strategy that uses fluorescence in situ hybridization (FISH) to detect female carriers with major deletions in the dystrophin gene. We screened a human X-chromosome-derived genomic library with a full-length dystrophin cDNA and isolated 15 dystrophin-specific cosmids that contain DMD gene exons. Six cosmids were further tested as FISH probes in control individuals and subsequently applied on chromosomes from eight males with DMD and known deletions and on samples from three female carriers. As expected, X chromosomes in normal females displayed four signals, two for the DMD-specific probe and two for the X-chromosome centromeric probe. Hybridization on chromosomal spreads from carriers of deletions revealed only one signal from the DMD-specific probe and two from the control centromeric probe. Males carrying deletions showed no DMD-specific signal for the deleted exons tested. Our data indicate that FISH could represent an alternative method for the detection of female carriers with DMD gene deletions.     

Fertilization in vitro. A review over the medical indications and suggestion to unified guidelines for public fertility clinics in Denmark

Medical indications for in vitro fertilization and embryo transfer (IVF-ET) internationally and in Denmark are reviewed. Reports from large international centres document that tubal infertility, unexplained infertility, endometriosis and male infertility are equally good indications for IVF. Traditionally, tubal infertility has been the only medical indication qualifying for IVF treatment within the National Health Service in Denmark. Thus, in this country, couples with unexplained and male infertility and with endometriosis have to pay up to 25,000 D.Kr. per IVF-ET treatment in private fertility clinics. Since there is no scientific basis for this discrimination, it is urged that the present rules are changed, so that couples with unexplained and male infertility and endometriosis are also allowed IVF treatment free of charge in the public fertility clinics.     

Remote sensing of species mixtures in conifer plantations using LiDAR height and intensity data

In even-aged, single species conifer plantations LiDAR height data can be modelled to provide accurate estimates of tree height and volume. However, it is apparent that growth models developed for single species stands are not directly transferable to a more general situation of mixed species plantations. This paper evaluates the ability of small footprint, dual-return, pulsed airborne LiDAR data to estimate the proportion of the productive species when mixed with a nurse crop in closed canopy plantations. A study area located in Galloway Forest District in Scotland is used as an example of Lodgepole pine and Sitka spruce mixed plantation; this area contains good examples of a wide range of pure and mixed species plantation types. Three species groups are studied: areas of pure Sitka spruce, areas of pure Lodgepole pine and areas where the two species have been planted together. Two approaches are assessed for detection of plantation mixtures: the first uses LiDAR intensity data to separate spruce and pine species and the second uses LiDAR-derived canopy density measures, coefficient of variation, skewness, percent of ground returns (which provides a measure of canopy openness) and the mean canopy height, which enables areas with height variations to be identified. From analysis of LiDAR data extracted from 54 study plots using logistic regression, the coefficient of variation and LiDAR intensity data provide the most useful predictors of the proportion of spruce in a pine/spruce mixture with coefficients of determination (R²) of 0.914 and 0.930 respectively. The method could be developed as a mapping tool, which in combination with existing inventory data should help to improve timber volume forecasting for mixed species even-aged plantations.