Modeling of multilevel converters

In this paper, the imbricated cells multilevel converters are studied and modeled from a control viewpoint. These converters make use of several switches connected in a series, which allows using switches with reduced voltage ratings; these low voltage switches have lower conduction losses and can switch at higher frequency. In addition to this feature common to all converters using series connected switches, the control signals of multilevel converters can be phase shifted to increase the apparent switching frequency and improve the dynamic performances of the whole converter. It is shown that a multilevel inverter leg, composed of p pairs of switches and p-1 capacitors, forms a multivariable nonlinear system that cannot be properly modeled by standard methods such as state-space averaging. The transient behavior of this system depends on the current harmonics and their phase shift with the different control signals. A specific model is detailed, studied, and used to illustrate the properties of these converters. In particular, the natural balancing of the voltage across the switches is demonstrated and the time constants involved in this process are determined     

Effect of Molybdenum on the Structure and on the Crystallization of SiO2–Na2O–CaO–B2O3 Glasses

Crystallization of the poorly durable Na₂MoO₄ phase able to incorporate radioactive cesium must be avoided in SiO₂–Al₂O₃–B₂O₃–Na₂O–CaO glasses developed for the immobilization of Mo-rich nuclear wastes. Increasing amounts of B₂O₃ and MoO₃ were added to a SiO₂–Na₂O–CaO glass, and crystallization tendency was studied. Na₂MoO₄ crystallization tendency decreased with the increase of B₂O₃ concentration whereas the tendency of CaMoO₄ to crystallize increased due to preferential charge compensation of BO₄⁻ entities by Na⁺ ions. ²⁹Si MAS NMR showed that molybdenum acts as a reticulating agent in glass structure. Trivalent actinides surrogate (Nd³⁺) were shown to enter into CaMoO₄ crystals formed in glasses.     

Characterization of Ge–Bi–S glass by thermal, electrical, switching and optical measurements

A study of the synthesized Ge22.5Bi7S70.5 glassy system has been carried out. Differential thermal analysis data indicate the retention in the as-quenched sample of two amorphous phases. Thermal conductivity, , measurements on bulk sample reveal that the main contribution to is due to phonon thermal conductivity. Thermal evaporation of the synthesized ingot gives films with Ge20.7Bi6.8S72.5 as composition. The values of the activation energy and the pre-exponential factor calculated from the direct current electrical conductivity above 53 °C suggest that carrier conduction occurred between extended states in these films. The I–V characteristics in the off-state and the switching phenomenon are investigated. A memory switch with a threshold voltage decreasing with temperature is detected for the studied films. Optical parameters such as absorption coefficient, optical gap and refractive index are also determined. Comparison with binary Ge–S glass reveals that the addition of Bi introduces additional absorbing states at band edges. © 1998 Kluwer Academic Publishers     

Seismic Retrofit of State Street Bridge on Interstate 80

The State Street Bridge, in Salt Lake City, was designed and built in 1965 according to the 1961 AASHO specifications; the design did not include earthquake-induced forces or displacements since only wind loads were considered. The bridge consists of four reinforced concrete (RC) bents supporting composite welded steel girders; the bents are supported on cast-in-place concrete piles and pile caps. A vulnerability analysis of the bridge was conducted that determined deficiencies in (1) confinement of column lap splice regions, (2) anchorage of longitudinal column bars in the bent cap, (3) confinement of column plastic hinge zones, and (4) shear capacity of columns and bent cap–column joints. Seismic retrofit designs using carbon-fiber-reinforced-polymer (CFRP) composites and steel jackets were performed and compared for three design spectra, including the 10% probability of exceedance in 250 years earthquake. The CFRP composite design was selected for implementation and application of the composite was carried out in the summer of 2000 and 2001, while the bridge was in service. The paper describes the CFRP composite design, which, in addition to column jackets, implemented an “ankle wrap” for improving joint shear strength and a “U-strap” for improving anchorage of column bars in the bent cap; other retrofit measures were implemented, such as bumper brackets and a deck slab retrofit. A capacity versus demand evaluation of the as-built and retrofitted bents is presented.     

Joint physical and link layer error control analysis for nanonetworks in the Terahertz band

Nanonetworks consist of nano-sized communicating devices which are able to perform simple tasks at the nanoscale. The limited capabilities of individual nanomachines and the Terahertz (THz) band channel behavior lead to error-prone wireless links. In this paper, a cross-layer analysis of error-control strategies for nanonetworks in the THz band is presented. A mathematical framework is developed and used to analyze the tradeoffs between Bit Error Rate, Packet Error Rate, energy consumption and latency, for five different error-control strategies, namely, Automatic Repeat reQuest (ARQ), Forward Error Correction (FEC), two types of Error Prevention Codes (EPC) and a hybrid EPC. The cross-layer effects between the physical and the link layers as well as the impact of the nanomachine capabilities in both layers are taken into account. At the physical layer, nanomachines are considered to communicate by following a time-spread on-off keying modulation based on the transmission of femtosecond-long pulses. At the link layer, nanomachines are considered to access the channel in an uncoordinated fashion, by leveraging the possibility to interleave pulse-based transmissions from different nodes. Throughout the analysis, accurate path loss, noise and multi-user interference models, validated by means of electromagnetic simulation, are utilized. In addition, the energy consumption and latency introduced by a hardware implementation of each error control technique, as well as, the additional constraints imposed by the use of energy-harvesting mechanisms to power the nanomachines, are taken into account. The results show that, despite their simplicity, EPCs outperform traditional ARQ and FEC schemes, in terms of error correcting capabilities, which results in further energy savings and reduced latency.     

Morphogen Signals Shaping the Gastric Glands in Health and Disease

The adult gastric mucosa is characterised by deep invaginations of the epithelium called glands. These tissue architectural elements are maintained with the contribution of morphogen signals. Morphogens are expressed in specific areas of the tissue, and their diffusion generates gradients in the microenvironment. Cells at different positions in the gland sense a specific combination of signals that instruct them to differentiate, proliferate, regenerate, or migrate. Differentiated cells perform specific functions involved in digestion, such as the production of protective mucus and the secretion of digestive enzymes or gastric acid. Biopsies from gastric precancerous conditions usually display tissue aberrations and change the shape of the glands. Alteration of the morphogen signalling microenvironment is likely to underlie those conditions. Furthermore, genes involved in morphogen signalling pathways are found to be frequently mutated in gastric cancer. We summarise the most recent findings regarding alterations of morphogen signalling during gastric carcinogenesis, and we highlight the new stem cell technologies that are improving our understanding of the regulation of human tissue shape.     

Low Breakdown Voltage Varistors by Grain Boundary Diffusion of Molten Bi2O3 in ZnO

Diffusion of molten Bi₂O₃ into the grain boundaries of sintered, alumina-doped (0.23 and 0.7 mol%) ZnO pellets resulted in varistors with breakdown voltages in the 3–5 V range and nonlinearity coefficients of 10–24. The varistors were fabricated by spreading a thin layer of Bi₂O₃ powder on the surface of ZnO pellets and heating the combination to various temperatures (860–1155°C) and different times. The highest nonlinearity coefficients (20–24) and lowest breakdown voltages (3–5 V) were recorded in samples annealed at 860°C for 35 min. Longer annealing times and/or higher temperatures resulted in progressively higher breakdown voltages. Eventually the devices became insulating, which was attributed to the formation of an insulating Bi₂O₃ layer between the grains. Separate wetting experiments have shown that the penetration of Bi₂O₃ into ZnO grain boundaries was a strong function of alumina doping —the penetration rate was decreased by a factor of 5–7 as the ZnO was doped with as little as 0.2 mol% alumina. It is this slowing down of the penetration of the ZnO grain boundaries that is believed to be critical in the development of the low breakdown voltages observed.     

Reliability-Based Design Optimization for Durability of Ground Vehicle Suspension System Components

The effect of materials processing- and component manufacturing-induced uncertainties in material properties and component shape and size on the reliability of component performance is investigated. Specifically, reliability of a suspension system component from a high-mobility multipurpose wheeled vehicle which typically can fail under low-cycle strain-based fatigue conditions is analyzed. Toward that end, the most advanced reliability-based design optimization methods available in the literature were combined with the present understanding of low-cycle fatigue durability and applied to the component in question. This entailed intricate integration of several computational tools such as multibody vehicle dynamics, finite-element simulations, and fatigue strain-life assessment/prediction techniques. The results obtained clearly revealed the importance of consideration of material property uncertainties in attaining vehicle performance of critical structural components in complex systems (e.g., a vehicle).     

In vitro buffering capacity changes of seven commodities under controlled moisture and heating conditions.

Effects of adding 0 or .25 g of water/g of feed and heating for 0, 20, or 40 h at 100 degrees C on buffering capacity of beet pulp, almond hulls, alfalfa hay, oat hay, wheat bran, oat bran, and barley were determined in vitro. Feeds were examined for ash, N, NDF, ADF, acid detergent lignin, total buffering capacity (pH 4 to 9), and physiological buffering capacity (pH 5.5 to 7). Minerals were measured at 0 g of water/g of feed, 0 h of heat and at .25 g of water/g of feed, 40 h of heat; differences were negligible. Total buffering capacity was high for alfalfa, oat hay, and almond hulls; low for barley and oat bran; and intermediate for beet pulp and wheat bran. Physiological buffering capacity was consistently lower than total buffering capacity, but differences varied among and within feeds. Moisture had little effect on buffering capacity, NDF, ADF, or lignin. Time of heating had a significant effect on buffering capacity, NDF, ADF, and lignin but not on N or ash. Heating increased buffering capacity in most cases. Lignin was a poorer predictor of buffering capacity than total ash across feeds but a better predictor within feed across treatments. Large errors could occur when using total ash to predict buffering capacity for feeds subjected to heat.     

Improvement and stabilization white of bread flavour

Effect of adding the model system mixture (D,L-lysine · HCl, L-proline and D-glucose) on the sensory properties and volatile components of fresh bread and bread stored for 3 days were investigated. The results showed that the model system mixture improved the crust colour and flavour of fresh bread and kept the freshness, retarded the staling and improved the quality of the bread samples stored for 3 days. Analysis of the crust aroma of the bread samples showed that 2-acetyl pyrazine, 2-acetyl pyridine and 2-methyl-3-ethyl pyrazine, which may be responsible for bread crust aroma, were determined at high concentration in the bread sample containing 0.24% model system mixture. The concentration of pyrazine derivatives increased during storage whereas the carbonyl, pyrrol and furan derivatives decreased.