The effect of grain size, strain rate, and temperature on the mechanical behavior of commercial purity aluminum

Commercial purity aluminum AA1050 was subjected to equal channel angular extrusion (ECAE) that resulted in an ultrafine-grained (UFG) microstructure with an as-received grain size of 0.35 μm. This UFG material was then annealed to obtain microstructures with grain sizes ranging from 0.47 to 20 μm. Specimens were compressed at quasi-static, intermediate, and dynamic strain rates at temperatures of 77 and 298 K. The mechanical properties were found to vary significantly with grain size, strain rate, and temperature. Yield stress was found to increase with decreasing grain size, decreasing temperature, and increasing strain rate. The work hardening rate was seen to increase with increasing grain size, decreasing temperature, and increasing strain rate. The influence of strain rate and temperature is most significant in the smallest grain size specimens. The rate of work hardening is also influenced by strain rate, temperature, and grain size with negative rates of work hardening observed at 298 K and quasi-static strain rates in the smallest grain sizes and increasing rates of work hardening with increasing loading rate and grain size. Work hardening behavior is correlated with the substructural evolution of these specimens.     

State of polarization changes: Classification and measurement

We propose a standardization procedure that provides a convenient, quantitative and reproducible laboratory-based method for measuring the state of polarization (SOP) fluctuations produced by polarization varying devices. This method is based on the SOP distributions generated by commercial polarization scramblers. We show that these devices generate distributions of the maximum change of the SOP (in a given sample time) that follow Rayleigh statistics, which scale linearly with scrambling frequency and the sample time. We use this procedure to measure the SOP fluctuations in a short length of coiled fiber subject to mechanical perturbations.     

移动WiMAX的发展现状

基于IEEE 802.16-2004及ETSI HiperMAN空中接口标准的WiMAX,正在被证明是一个高性价比的替代有线和DSL服务的固定无线技术.150多次的WiMAX试验及在五大洲的部署,清楚地证明了世界范围内对WiMAX作为固定无线服务技术的接受程度.     

A noncompetitive peptide inhibitor of the nicotinic acetylcholine receptor from Conus purpurascens venom

A paralytic peptide, psi-conotoxin Piiie has been purified and characterized from Conus purpurascens venom. Electrophysiological studies indicate that the peptide inhibits the nicotinic acetylcholine receptor (nAChR). However, the peptide does not block the binding of alpha-bungarotoxin, a competitive nAChR antagonist. Thus, psi-conotoxin Piiie appears to inhibit the receptor at a site other than the acetylcholine-binding site. As ascertained by sequence analysis, mass spectrometry, and chemical synthesis, the peptide has the following covalent structure: HOOCCLYGKCRRYOGCSSASCCQR* (O = 4-trans hydroxyproline; * indicates an amidated C-terminus). The disulfide connectivity of the toxin is unrelated to the alpha- or the alphaA-conotoxins, the Conus peptide families that are competitive inhibitors of the nAChR, but shows homology to the mu-conotoxins (which are Na+ channel blockers).     

Semiconductor laser dynamics for feedback from afinite-penetration-depth phase-conjugate mirror

Most of the previous treatments of semiconductor lasers subject to optical feedback from a phase-conjugate mirror (PCM) have assumed that the PCM responds instantaneously. Furthermore, the mechanism responsible for phase conjugation does not usually enter into the analysis. In this paper, we derive the time-dependent reflectivity of a PCM created through nondegenerate four-wave mixing in a Kerr-type nonlinear medium. The resulting laser dynamics are compared with the case of the ideal PCM, as a function of the external-cavity length, the PCM reflectivity, and the PCM interaction depth. The PCM with a significant interaction depth tends to suppress otherwise chaotic output and produces pulses whose repetition rate is tunable by varying PCM reflectivity. At high feedback levels, it stabilizes the laser output. We use the circle-map formalism to explain our numerical results     

Serum amyloid P component scintigraphy and turnover studies for diagnosis and quantitative monitoring of AA amyloidosis in juvenile rheumatoid arthritis

OBJECTIVE: To evaluate aspects of the natural history of AA amyloidosis complicating juvenile rheumatoid arthritis (JRA), and its response to therapy with chlorambucil. METHODS: Scintigraphy and 7-day turnover studies were performed in JRA patients with histologically proven (n = 35) or clinically suspected (n = 30) AA amyloidosis, following intravenous injection of 123I and 125I-labeled serum amyloid P component (SAP). Prospective monitoring studies were performed over 2-3 years in 20 patients with amyloidosis. All but 2 amyloidosis patients were treated with chlorambucil. RESULTS: Positive scanning results were obtained in all patients in whom imaging was performed within 12 years of positive biopsy findings of amyloid and in 5 patients with clinically suspected amyloidosis. Negative scanning results with normal SAP metabolism, indicating regression of amyloid, were obtained in 4 patients whose amyloidosis had been in full clinical remission for more than 12 years. Prospective monitoring studies in patients whose JRA-associated inflammatory activity was in remission demonstrated regression of amyloid in 8 patients and no substantial changes in 8 others; however, in 4 further patients with active inflammation, there was accumulation of amyloid. There was a very poor correlation between the amount of amyloid present at a particular site and the resultant organ dysfunction. CONCLUSION: Radiolabeled SAP scintigraphy and turnover studies are useful complementary tools in the diagnosis, screening, and quantitative monitoring of type AA amyloidosis in JRA. The amyloid deposits may progress and/or regress at different rates in different anatomic sites over short periods.     

Three-dimensional fracture simulation with a single-domain,direct boundary element formulation

An efficient hypersingular boundary integral equation method for three-dimensional fracture mechanics was presented in a previous paper. The details of the numerical implementation of this method are further discussed herein. In particular, an algorithm for achieving the required differentiability of the crack surface displacement function is discussed. To illustrate the utility of the method, computational results for several strongly interacting multiple-crack geometries are presented. The calculated stress intensity factors are in excellent agreement with those obtained by an approximate analytical method due to Kachanov and Laures.