Carotenoid Composition and Vitamin A Values of Oils from Four Brazilian Palm Fruits

In oils extracted from fresh and sterilized palm fruits (Elaeis guineensis, Jacq. tenera, dura dumpy and psifera and E. oleifera), cis-phytofluene, 13-cis-α-carotene, α-carotene, 13-cis-β-carotene, β-carotene, 9-cis-β-carotene, σ-carotene, zeaxanthin, --cryptoxanthin, poly-cis-lycopene, mono-lycopene and lycopene, were identified and quantified by normal phase open column chromatography (stepwise-elution), TLC, UV/Vis spectroscopy and specific chemical reactions. The sum of α- and β-carotene in all samples analysed was higher than 80% of the total carotenoid content, while the α/β-carotene ratios were W.9, 1/11.1, 1/22 and V2.6 for oils extracted from fresh fruits of dura dumpy, psifera, tenera and E. oleifera, respectively. Total carotenoid contents (pg/g) and vitamin A values (R. E./100 g) of these samples were 1 120.7 and 12 404 for dura dumpy, 283.2 and 3612 for psifera, 660.5 and 7630 for tenera and 1576.8 and 21691 for E. oleifera. The sterilization of fruits (127°C × 35 min.) resulted in isomerization of pigments and reduction of vitamin A values of approximately 45% and 25%, respectively.     

Biosynthesis of fatty acids byTrypanosoma cruzi

The incorporation of [1-¹⁴C] acetate into fatty acids by cultured epimastigotes ofTrypanosoma cruzi was studied. After 8, 24, and 48 hr incubation with labeled precursor, up to 2.8% of the initial radioactivity added to the medium was found in theT. cruzi long chain fatty acids. Saturated (16∶0 and 18∶0), monounsaturated (18∶1ω9), and diunsaturated (18∶2ω6) fatty acids were synthesized. Both the pattern of incorporation of labeled acetate into the fatty acids and the decarboxylation ratios found suggest that de novo synthesis of fatty acids has taken place.     

A prismoid framework for languages with resources

Inspired by the Multiplicative Exponential fragment of Linear Logic, we define a framework called the prismoid of resources where each vertex is a language which refines the λ-calculus by using a different choice to make explicit or implicit (meta-level) the definition of the contraction, weakening, and substitution operations. For all the calculi in the prismoid we show simulation of β-reduction, confluence, preservation of β-strong normalisation and strong normalisation for typed terms. Full composition also holds for all the calculi of the prismoid handling explicit substitutions. The whole development of the prismoid is done by making the set of resources a parameter of the formalism, so that all the properties for each vertex are obtained as a particular case of the general abstract proofs.     

Evaluating evolution: Naturalistic inquiry and the Perseus Project

Delia Neuman is an assistant professor in the College of Library and Information Services at the University of Maryland, College Park. She has written several articles on the use of naturalistic inquiry to study electronic environments, including two published in Educational Technology Research and Development: Naturalistic Inquiry and Computer-Based Instruction: Rationale, Procedures and Potential (Spring 1989) and Learning Disabled Students' Interactions with Commercial Courseware: A Naturalistic Study (Spring 1991). She is currently involved in a study funded by the American Library Association to use naturalistic methods to investigate high school students' use of CD-ROM and online databases.     

Synthesis of AlN nanopowder coated with a thin layer of C,using a thermal plasma reactor

High-purity nanocrystalline aluminum nitride powders were synthesized by using a 12?kW non-transferred arc plasma. The synthesis was conducted in a versatile, new designed, one-chamber thermal plasma reactor (TPR). The novel experimental assembly incorporated better working conditions like: high temperature gradient between the crucible and reactor's wall, and high super-saturation of the system by nitrogen and carbon. Thermodynamic modelling of the synthesis was conducted in order to achieve the best conditions for AlN formation. In this study, aluminum discs of Al 1100 were used as precursor material and pure nitrogen was the only gas used as reagent and plasmogenic gas.Nanopowders collected from reactor's wall were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-Ray diffraction (XRD). Synthesized h-AlN nano-powders were found to be free of oxides and aluminum metal. A thin carbon-layer around the particles was detected. TEM results indicated that the carbon-layer was around 5 and 10?nm. This outcome could make a significant difference with other synthesis reported in the literature since the occurrence of the carbon-layer, could delay AlN oxidation, prevent hydration, and could avoid the agglomeration of the particles.     

Improving the performances of earth air heat exchangers through Constructal design

Earth to air heat exchanger (EAHE) is a well‐known technique used to preheat or precool outdoor air before blowing it into a building. However, its geometry is often very simple as it consists in one or multiple straight pipes, while more complex arrangements can be found in heat exchangers design. In this paper, we explore the advantage of designing an EAHE as a network through the Constructal law point of view. A methodology is first proposed to design a single pipe EAHE when the need is defined in terms of cooling power, overall efficiency and enthalpy difference between the inlet air and the ground. Next, the single pipe EAHE is used as a reference for designing a tree‐shaped network under the constraint of identical fluid volume and cooling power. The geometrical features are allowed to change for the different branches of the network. The network coefficient of performance is found to increase significantly with the bifurcation level, illustrating the superior performances of the network. This approach was found to be robust as the improvements were not depending on the cooling demand or the environmental conditions. However, further work is needed to move from this theoretical result to practical considerations.     

Constructal design of underground heat sources or sinks for the annual cycle

Here we show that the heat transfer between a pipe assembly and the soil during the annual temperature cycle of a heat pump depends on the configuration of the flow system. We rely on constructal design to find the flow architecture (spacings, shapes) such that the heat transfer between the assembly and the ground is increased. The flow configuration changes freely, and its design is evolutionary. The better shapes change gradually from slender to square as the volume fraction occupied by the flow assembly increases. The heat transfer performance increases as the depth of the structure decreases, but the depth has a negligible effect on the shape of the structure. The results also show that the heat transfer performance increases as the configuration of the ground volume and the buried structure evolves to the most slender shape possible.     

Vascularization for cooling and mechanical strength

In this paper we explore the use of vascular design that provides cooling and mechanical strength at the same time. We illustrate the concept with a circular plate vascularized with embedded channels. The cooling fluid enters to the plate from the center or from the rim, and leaves after it cools the plate down to an allowable temperature level. The vascular cooling channels also affect the mechanical strength of the plate. We simulated numerically the thermofluid and mechanical behavior for three different structures; radial, dendrites with one pairing level and dendrites with two pairing levels. We found that for a given set of conditions (applied pressure difference, coolant inlet position, and number of the cooling channels) there is one configuration that is best; however, there is no single configuration that is best for all conditions.