Development of low-alcohol isotonic beer by interrupted fermentation

Alcohol-free beer with isotonic properties is getting more popular and its production can be carried out by different production strategies; however, interrupted fermentation is still a challenge. Therefore, the objective of this study was to develop a low-alcohol isotonic beer (<0.5% v/v) by interrupted fermentation. Moreover, the major objective is to compare the developed product to commercial beverages (sports drinks, ‘Pilsen' regular beer, alcohol-free beers and low-alcohol isotonic beer). The beverages were evaluated based on pH, alcohol content (% v/v), total titratable acidity (mEq L⁻¹), osmolality (mOsmol kg⁻¹), bitterness International Bitterness Units, colour European Brewery Convention, total phenolic compounds (mg L⁻¹ gallic acid), reducing and total sugars (%) and Na and K contents (mg L⁻¹). The developed low-alcohol isotonic beer presented characteristics similar to sports drinks, with the advantage of being richer in phenolic compounds and suitable osmolality. Despite salts were added in its formulation, the grades attributed to all beers employed in the sensory evaluation, as well as the purchase intention did not present significant differences.     

Polyetherimide-LaNi5 composite films for hydrogen storage applications

This study investigates the preparation of polyetherimide (PEI) – LaNi₅ composites films for hydrogen storage. Prior to the polymer addition, LaNi₅ was ball-milled at different conditions (250, 350, and 450 RPM) and annealed at 500 °C for 1 h under vacuum. The composites were produced with BM-LaNi₅-350 (PEI/LaNi₅-350) and annealed BM-LaNi₅-350 (PEI/LaNi₅-350-TT). Membranes were successfully produced through solvent casting assisted by an ultrasonic bath. The particles dispersion and the film morphology did not change after hydrogenation cycles. In the H₂ sorption experiments at 43 °C and 20 bar, the films stored H₂ without incubation time; both samples reached a capacity of ~0.6 wt%. The H₂ sorption kinetics of PEI/LaNi₅-350 was comparable to that of BM-LaNi₅-350, whereas PEI/LaNi₅-350-TT presented significantly slower kinetics. LaNi₅ oxidation was hindered by PEI, showing that it can be explored to improve metal hydrides air resistance. The results demonstrated that PEI films filled with LaNi₅ are promising materials for hydrogen storage.     

Synthesis of Benzophenones and in vitro Evaluation of Their Anticancer Potential in Breast and Prostate Cancer Cells

Breast and prostate cancers are frequently treated with chemotherapy. Several novel chemicals are being reported for this purpose, particularly synthetic and natural benzophenones. This work reports the synthesis of substituted 2-hydroxybenzophenones through 1,4-conjugate addition/intramolecular cycloaddition/dehydration of nitromethane on key intermediate chromones. Structures were extensively studied by means of 2D NMR spectroscopy and single-crystal XRD. Their cytotoxicity was evaluated in vitro in two breast cancer cell lines (MDA-MB-231 and T47-D) and one prostate cancer cell line (PC3). The most potent compound exhibited good cytotoxic effects against the three cancer cell lines (IC₅₀ values ranging from 12.09 to 26.49 μm ) and induced cell-cycle retardation only on prostate cancer cells, which suggested that it might exert cell-type-specific effects.     

A New Hand-Held Microsystem Architecture for Biological Analysis

This paper presents a hand-held microsystem based on new fully integrated magnetoresistive biochips for biomolecular recognition (DNA hybridization, antibody antigen interaction, etc.). Magnetoresistive chip surfaces are chemically treated, enabling the immobilization of probe biomolecules such as DNA or antibodies. Fluid handling is also integrated in the biochip. The proposed microsystem not only integrates the biochip, which is an array of 16times16 magnetoresistive sensors, but it also provides all the electronic circuitry for addressing and reading out each transducer. The proposed architecture and circuits were specifically designed for achieving a compact, programmable and portable microsystem. The microsystem also integrates a hand-held analyzer connected through a wireless channel. A prototype of the system was already developed and detection of magnetic nanoparticles was obtained. This indicates that the system may be used for magnetic label based bioassays     

Analysis of an extensive measurement program developed from the start up to the follow up of the operation of the CNAAA NPP

Integrated tests (IT) applied to the Units I and II of the CNAAA Nuclear Power Plants (Angra dos Reis, Rio de Janeiro, Brazil) vara part of a comprehensive test program required to have the commercial operational licence issued. The IT cover operation at zero power and the subsequent power levels (the power escalation) until the nominal power operation.

This paper reports and compares the results of systematic neutron and gamma equivalent dose-rate measurements performed inside and outside the reactor containment of each Unit, during the start-up phase of the operation, for different power levels of the reactors. It also compares the collective-doses measured along the operation of the two units of the CNAAA wich similar data of the Grafenrheinfeld nuclear power plant (Germany) — basic-of-project for the CNAAA — Unit II — and analyses the data under the fight of the state-of-art.     

Risk factors for a medically inappropriate admission to a Department of Internal Medicine

OBJECTIVE: To identify patient- and admission-related risk factors for a medically inappropriate admission to a department of internal medicine. METHODS: Cross-sectional study of a systematic sample of 500 admissions to the department of internal medicine of an urban teaching hospital. The appropriateness of each admission and reasons for inappropriate admissions were assessed using the Appropriateness Evaluation Protocol. Risk factors included the time (day of week and holidays) and manner (through emergency department or direct admission) of admission, patient age and sex, health status of patient and spouse, living arrangements, formal home care services, and informal support from family or friends. RESULTS: Overall, 76 (15.2%) hospital admissions were rated as medically inappropriate by the Appropriateness Evaluation Protocol. In multivariate analysis, the likelihood of an inappropriate admission was increased by better physical functioning of the patient (odds ratio [OR], 1.5; 95% confidence interval [CI], 1.1-2.1 [for 1 SD in Physical Functioning scores]), lower mental health status of the patient's spouse (OR, 2.6; 95% CI, 1.3-5.6), receipt of informal help from family or friends (OR, 3.3; 95% CI, 1.5-7.2), and hospitalization by one's physician (OR, 3.6; 95% CI, 1.7-7.5). Receiving formal adult home care was not associated with inappropriateness of hospitalization. CONCLUSIONS: Inappropriate admissions to internal medicine wards are determined by a mix of factors, including the patient's health and social environment. In addition, the private practitioners' discretionary ability to hospitalize their patients directly may also favor medically inappropriate admissions.     

The ability of the rat to metabolize myristoyl-methionine: an acylamino acid with potentially useful antibacterial properties

Two experiments with Sprague Dawley rats tested their ability to hydrolyse myristoyl-methionine (M-M) into myristic acid and L-methionine (M). In the first experiment, lasting for 3 days. male rats were orally administered [9,10-3H]myristoyl-L-[35S]methionine. The recovery of radioactivity was approximately 90% for both isotopes; 19% of the administered 3H was recovered in the urine and 16% in the faeces, while the recovered 35S activity was 13 and 12%, respectively. The balance of the radioactivity was found among the tissues, organs and blood. In the second experiment, male and female rats received soybean-based diets which were supplemented with either 0.305% M-M or 0.2% M (both diets contained equal amounts of M) for periods up to 4 weeks. The growth rate of the rats receiving the 0.305% M-M diets was slightly slower than that for the rats on the 0.2% M diet, but the difference was not statistically significant (P > 0.05). The M-M rats had a transitory decrease in feed consumption, suggesting that palatability may have contributed to the growth difference and that a somewhat greater amount of M-M was necessary for the rat to attain the same growth rate as that produced by 0.2% M. When the amount of dietary M-M was increased to 3.05% M-M, a greater reduction in feed consumption and body weight gain was observed. This latter diet was an initial attempt to study the potential toxicity of M-M. None of the haematological, clinical chemistry or organ weight data suggested that M-M was overtly toxic per se, but longer-term feeding studies are needed to evaluate the potential toxicity of M-M more fully.     

Kinetic analysis of the coding properties of O6-methylguanine in DNA: the crucial role of the conformation of the phosphodiester bond

Production by N-nitroso compounds of O6-alkylguanine (O6-alkylG) in DNA directs the misincorporation of thymine during DNA replication, leading to G:C to A:T transition mutations, despite the fact that DNA containing O6-alkylG:T base pairs is less stable than that containing O6-alkylG:C pairs. We have examined the kinetics of incorporation by Klenow fragment (KF) of Escherichia coli DNA polymerase I of thymine (T) and of cytosine (C) opposite O6-MeG in the template DNA strand. Both T and C were incorporated opposite O6-MeG much slower than nucleotides forming regular A:T or G:C base pairs. Using various concentrations of dTTP, dCTP, or their phosphorothioate (Sp)-dNTP alpha S analogues, or a mixture of dTTP and dCTP, the progress of incorporation of a single nucleotide in a single catalytic cycle of a preformed KF-DNA complex was measured (pre-steady-state kinetics). The results were consistent with the kinetic scheme (Kuchta, R. D., Benkovic, P., & Benkovic, S. J. (1988) Biochemistry 27, 6716-6725): (1) binding of dNTP to polymerase-DNA; (2) conformational change in polymerase; (3) formation of phosphodiester between the dNTP and the 3'-OH of the primer; (4) conformational change of polymerase; (5) release of pyrophosphate. The results were analyzed mathematically to identify the steps at which the rate constants differ significantly between the incorporation of T and C. The only significant difference was the 5-fold difference in the rates of formation of the phosphodiester bond (for dTTP, kforward = 3.9 s-1 and kback = 1.9 s-1; for dCTP, kforward = 0.7 s-1 and kback = 0.9 s-1). These pre-steady-state progress curves were biphasic with a rapid initial burst followed by an apparently steady-state rise. Deconvolution of these curves gave direct evidence for the importance of the conformational change after polymerization by showing that the curves represented the sum of the rapid accumulation of the product of step 3 followed by the slow conversion of that to the product of step 5 (because of the rapidity of the release of pyrophosphate there was no significant accumulation of the product of step 4). The equilibrium constants for each step suggest that the greatest change in the Gibbs free energy occurs at the conformational change after polymerization and that while the formation of the phosphodiester bond to T is slightly exothermic, that to C is slightly endothermic.(ABSTRACT TRUNCATED AT 400 WORDS)     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Atmospheric corrosion of reference metals in Antarctic sites

This paper presents the results obtained at three Antarctic test sites participating in the “Ibero-American Map of Atmospheric Corrosiveness” (MICAT), a project on atmospheric corrosion carried out during the period 1988–1994 at some 70 sites distributed across 12 countries of the Latin-American region, Spain and Portugal. The three Antarctic sites are located near the coastline.The singular climatic characteristics of Antarctic regions are related with the purity of the air, the absence of rainfall and the formation of ice on the metallic surface during an important part of the exposure time. However, electrochemical activity is possible below ice layers. This situation affects the structure and morphology of corrosion product films and the resulting corrosion rates of metallic surfaces.