Fundamental aspects of excitation and propagation of on-line partial discharge signals in three-phase medium voltage cable systems

On-line partial discharge (PD) detection of three-phase belted medium voltage cable connections results in a number of interpretation differences as compared to off-line measurements where only one phase is energized. The induced currents and charges in the phase conductors and earth screen upon a PD not only depend on the discharge site, but also become phase angle dependent. Furthermore, simulations show that the PD distribution itself varies with the amount of eccentricity of the rotating electric field and may differ from the off-line distributions obtained with a linear field. Finally, the PD propagation in a multi-conductor cable also alters the signals measured at the cable terminals. In this paper, induced charges and PD distributions are studied by means of computer simulation. The cable propagation characteristics are verified by measurements.     

A multi-purpose CMOS sensor interface for low-power applications

A dedicated low-power CMOS transponder microchip is presented as part of a novel telemetry implant for biomedical applications. This mixed analog-digital circuit contains an identification code and collects information on physiological parameters, i.e., body temperature and physical activity, and on the status of the battery. To minimize the amount of data to be transmitted, a dedicated signal processing algorithm is embedded within its circuitry. All telemetry functions (encoding, modulation, generation of the carrier) are implemented on the integrated circuit. Emphasis is on a high degree of flexibility towards sensor inputs and internal data management, extreme miniaturization, and low-power consumption to allow a long implantation lifetime     

Is the chest radiograph a reliable tool in the assessment of tumor response after radiotherapy in nonsmall cell lung carcinoma?

BACKGROUND: The purpose of this study was to evaluate whether the chest radiograph is a reliable tool to assess response to radiotherapy. MATERIALS AND METHODS: Pre- and post-treatment chest radiographs and computed tomographs (CT) of 63 patients with nonsmall cell lung cancer (NSCLC) treated by radiotherapy were reviewed by four observers with regard to suitability for tumor measurement, and response. Suitability for tumor measurement was expressed as the number of measurable diameters. In addition, the consequences to clinical outcome were studied by survival analysis. RESULTS: The CT turned out to be more suited for tumor measurement before as well as after radiotherapy, resulting in an increase of the number of measurable cases. The number of measurable cases with CT was 52 (83%) as compared to 28 (44%) with chest radiography. Especially in case of centrally localized tumors, the presence of an atelectasis, or squamous cell carcinoma, CT contributed to a higher rate of measurable cases. The interobserver agreement with regard to response using chest radiograph was good (mean kappa = 0.74). In 25 of 28 cases (89%) measurable with CT as well as with chest radiograph, response was equally classified. When CT was used, the median survival of the responders was 14.2 months as compared to 6.8 months of the nonresponders. When chest radiograph was used, the median survival of these groups was 12.0 and 6.6 months respectively, which was not significantly different when response was assessed by CT. CONCLUSION: We conclude that CT is more suited for tumor measurement because more measurable lesions can be found and more evaluable lesions on chest radiograph become measurable on CT. The chest radiograph does have a valuable role to play in those lesions that are measurable because of the good interobserver agreement with regard to the response classification, the high overall agreement between CT and chest radiograph in case of measurable cases, and the lack of important differences with regard to survival.     

Lighting level and productivity: a field study in the electronics industry

The effect of illuminance on the speed and the quality (percentage of errors) with which workers assemble electronic devices was studied in an electronics factory in The Netherlands. For the study, the horizontal illuminance was alternated per work shift between 800 and 1200 lux. The first test was done during the summer and a second test during the winter. A significant effect of illuminance has been found. With 1200 lux at the working plane, the speed of production in the summer was 2.9% higher than with 800 lux. In the winter it was 3.1% higher with the increased illuminance. There was no significant effect of the illuminance on the percentage of errors.     

Course holding by cyclists and moped riders

Course holding by cyclists and moped riders includes both steering alongside a course and stabilising the vehicle. Inability to hold course may lead to conflicts with other road users. To design safe bicycle and moped facilities, and to consider the safety of those existing, knowledge about performance during course holding is necessary. Based on a literature survey, the article discusses how course holding will be influenced by characteristics of the course, the vehicle and the rider. Effects of disturbing factors such as side-wind and road-surface unevenness are also described. In a field study subjects carried out riding tests with various models of bicycles and mopeds on three courses. Speed, riding with one hand on the handlebars, side-wind and road-surface unevenness were included as independent variables.

Results indicate that cyclists and moped riders need a width of at least 1 m on straight roads. At intersections this width should be at least 1.25 m. Performance in the tests also showed differences between vehicle models and modes of riding.     

National and International Water Law

Abstract

The exchange of data and information relating to transboundary water resources is widely accepted as being an appropriate starting point for more comprehensive cooperation. This paper examines under what conditions data and information exchange occur in relation to shared water resources, and hence examines when it can be used as a confidence building measure. An overview of several major international river basins together with more detailed case studies of the Mekong. Rio Grande, and Rhine River basins suggest that factors that promote data and information exchange include the presence of compatible needs, absence of legacies of mistrust, increasing water resources stress, perceptions that cooperation is of mutual benefit, external pressure and funding, comparable levels of institutional capacity, popular and political concern about water resources management, and functional formal or informal cooperative arrangements. Analysis of the situation prevailing between Israel and the Palestinians with regard to shared water resources suggests that data and information exchange does not seem likely in the short term, even though other forms of cooperation have been established with mixed results. This suggests that in some situations, at least, data and information exchange relating to shared water resources may not be useful as a first step in establishing more comprehensive cooperation.     

PDMS-modified poly(styrene-alt-maleic anhydride)s as water-borne coatings based on surfactant-free latexes

In this work, two series of PDMS-modified poly(styrene-alt-maleic anhydride)s (PSMA) were prepared by the partial imidization of their anhydride groups with mono-functional, amine-terminated polydimethyl siloxanes (PDMS-NH₂) with two different molecular weights. Subsequently, surfactant-free artificial latexes were prepared and characterized and applied onto cotton fabric. The water contact angle values of the coated cotton fabric indicate the formation of hydrophobic surfaces, with static contact angles varying from 119° to 142° depending on the PDMS loading and PDMS molecular weight. Coatings of the prepared copolymers on cotton fabric are highly durable, as shown by washing studies with a standard soap solution. The properties of these water-based surfactant-free latexes can be tuned easily by changing the composition of the polymers, i.e. mol% of imidization, ammonolysis and cross-linking.     

Reversible catastrophic oxidation of a 38Fe–34Ni–25Cr alloy induced by sodium sulphate at low oxygen potential atmospheres

The chromia-forming nickel-based alloy Haynes® HR-120 was oxidised with and without Na₂SO₄ deposit in a CO/H₂/CO₂ (45/45/10%vol.) simulated process atmosphere at 900 °C for 96 h. During the first hours of oxidation, samples covered by sodium sulphate exhibit higher oxidation rate than non-covered ones. However, after 24 h both sulphate-covered and uncovered specimens follow the same linear kinetics. In this very low oxygen partial pressure environment (10^?18 atm), the presence of Na₂SO₄ promotes the growth of localized iron-rich oxide nodules leading to the observed accelerated oxidation. The development of these nodules is discussed to be the result of the chromia dissolution induced by a basic fluxing mechanism. As soon as the salt is evaporated, slower kinetics are observed and the nodules disappear. In these specific conditions, the oxidation could be considered as a self-healing process.     

Traffic accident reduction by monitoring driver behaviour with in-car data recorders

People who are aware of being observed tend to modify their behaviour. This phenomenon could potentially be used to encourage individuals to behave more safely when driving if there were means of providing feedback to the drivers about their behaviour on the road. So-called 'vehicle data recorders' offer such a means of providing behavioural feedback by confronting drivers with their recorded driving actions. A field trial of a 'matched experimental/control group design with intervention' was planned with the objective of investigating whether this feedback mechanism would reduce the number of road traffic accidents in everyday driving conditions. In the study, seven experimental vehicle fleets were involved, which varied widely in terms of the kind of transport sector concerned, the type of vehicles used, and the traffic circumstances in which the vehicles are operated. Each fleet was matched with at least one control vehicle fleet, taking into account those relevant traffic safety characteristics. In total, accident and exposure data were collected for 840 vehicles of which 270 equipped with a recorder. During an observation period representing a total of about 3,100 vehicle years, these vehicles were involved in 1,836 road accidents. Analysis of the effects of the use of data recorders in these fleets resulted in an average estimated accident reduction of some 20%. The analysis shows that the actual savings vary depending on the transport sector involved and on the prior level of the fleet's safety record. Further studies are needed to identify the more promising application of such a use of traffic data recorders as a means of reducing road accidents.