A light refractory concrete for thermal insulation

Compositions have been developed for nonshrinking vibrocast thermally insulating light refractory concretes with densities of 1.0, 1.3, 1.5, and 1.8 g/cm³ for temperatures of use up to 1400°C. The structure and properties have been examined for the concrete of density 1.3 g/cm³. __________ Translated from Novye Ogneupory, No. 4, pp. 29–32, April, 2008.     

Turbulent flow of a chemically reactive gas suspension in a channel with a blow

The influence of the chemical reactions occurring in the gas phase of a gas suspension flowing in a channel with penetrable walls and the combustion of the condensed-impurity particles in this flow on its gasdynamic structure has been investigated. It is shown that the order of the system of equations defining a flow of a chemically reactive gas suspension with a homogeneous exothermic reaction proceeding at a definite rate and a heterogeneous combustion of the condensed-phase particles can be decreased if certain assumptions are mode. The distributions of the parameters of the gas and dispersed phases were calculated as functions of the rate of blow and the sizes of the particles. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 4, pp. 91–98, July–August, 2007.     

Self Assembly of Polymer Structures Induced by Electric Field

A method has been developed for fabricating polymer microstructures based on electric field induced self assembly and pattern formation. A dielectric fluid placed in between two conductive plates experience a force in an applied electric field gradient across the plates, which can induce a diffusive surface instability and self construction of the fluid surface. This process is exploited for the fabrication of self assembled polymer microstructures as well as replicated patterns through the use of pre-patterned plates or electrodes. FEM simulation is used to decide the minimum wavelength and electric gradient distribution of polymer structures. A variety of structures in the micron and nanometer scales including bio-fluidic MEMS, polymer optoelectronic devices can be fabricated using this method.     

High‐pressure processing effects on the mechanical,barrier and mass transfer properties of food packaging flexible structures: a critical review

Food products can be high‐pressure processed (HPP) either in bulk or prepackaged in flexible or semi‐rigid packaging materials. In the latter case the packaging material is subjected, together with the food, to high‐pressure treatment. A number of studies have been performed to quantify the effects of high‐pressure processing on the physical and barrier properties of the packaging material, since the integrity of the package during and after processing is of paramount importance to the safety and quality of the food product. This article reviews the results of published research concerning the effect of HPP on packaging materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Measurement of forming trajectories during drilling

Results are provided for an experimental study of forming trajectories during drilling and the effect on them of cutting speed and drilling depth. __________ Translated from Izmeritel’naya Tekhnika, No. 8, pp. 31–33, August, 2006.     

Effect of coke quality on blast-furnace performance indices

The quality of coke has a strong effect on the performance indices of a blast furnace. For a furnace to operate with high productivity and a low coke rate, it is necessary to use coke with high strength characteristics. The Novolipetsk Metallurgical Combine has conducted studies of the effect of coke quality on the operation of blast furnaces of different sizes. The quality of the coke was evaluated on the basis of the following indices: CSR, CRL, the cold-strength indices M₁₀ and M₂₅, and the integral coke-quality index I_g.c used by the Sidmar company. Furnace productivity, coke rate, and the totterman index (DMI) were also used for the sake of comparison.     

Heat evolution of high-volume fly ash concrete

In this paper, the results of a laboratory investigation conducted with heat evolution of high-volume fly ash (HVFA) concrete are presented. Heat evolution of concrete was studied by measuring the temperature increase in concrete under adiabatic curing condition. Characteristic of heat evolution of fly ash concrete was found to be strongly dependent on the replacement level of fly ash and dosage of superplasticizer used to maintain workability. It was also found that using fly ash as cement replacement resulted in a reduction on the maximum temperature rise. Increasing the replacement level of fly ash caused lower temperature rise in concrete. Superplasticizer caused a delay in peak temperature rise time; this is taken as an indicator that high-dosage superplasticizer used in concrete caused retardation in hydration of cement. Concretes having similar ingredients showed similar peak temperature rise whether they are superplasticized or not.     

Synthesis Routes and Characterization of High-Purity, Single-Phase Gallium Nitride Powders

Synthesis of high-purity, single-phase gallium nitride powder has been achieved in a hot-wall tube furnace via (i) the reaction of gallium with ammonia (NH₃) and (ii) the conversion of gallium oxide (Ga₂O₃). For complete reaction, the optimum temperatures, NH₃ flow rates, and boat positions relative to the NH₃ inlet were 975°C, 400 standard cubic centimeters per minute (sccm), and 50 cm, respectively, for the gallium-NH₃ reaction, and 1050°C, 500 sccm, and 50 cm, respectively, for the Ga₂O₃ conversion. Polyhedra of various shapes were obtained from both processes; some rod-shaped crystals also were observed in the material derived from Ga₂O₃.