Piezoelectric properties of PVDF-conjugated polymer nanofibers

This study presents the development and characterization of PVDF-conjugated polymer nanofiber-based systems. Five different conducting polymers (CPs) were synthesized successfully and used to create the nanofiber systems. The CPs used are polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), and polycarbazole (PCZ). Nanofiber systems were produced utilizing the Forcespinning® technique. The nanofiber systems were developed by mechanical stretching. No electrical field or post-process poling was used in the nanofiber systems. The morphology, structure, electrochemical and piezoelectric performance was characterized. All of the nanofiber PVDF/CP systems displayed higher piezoelectric performance than the fine fiber PVDF systems. The PVDF/PPY nanofiber system displays the highest piezoelectric performance of 15.56 V. The piezoelectric performance of the PVDF/CP nanofiber systems favors potential for an attractive source of energy where highly flexible membranes could be used in power actuators, sensors and portable, and wireless devices to mention some.     

Value of information in remanufacturing complex products

Remanufacturing facilities usually face a trade-off between limited information about remanufacturing yields and potentially long supplier lead times. To improve production performance, these firms may attempt to acquire more timely and accurate information about remanufacturing yields or alternatively, to reduce the lead times of purchased parts. We develop four decision-making models to evaluate the impact of yield information and supplier lead time on manufacturing costs. We identify the operating conditions under which these capabilities are valuable, along with their relative impact on facility performance. Each model is formulated as an infinite horizon, stochastic dynamic program (Markov decision process). Our results indicate that the yield information is generally quite valuable, while investments in supplier responsiveness provide trivial returns to products with few parts. However, as product complexity increases with large number of target parts, the value of short lead times increases.     

On regional nonlinear H-filtering

The structure of the nonlinear H^∞-filter in the neighborhood of the estimated trajectory is investigated and a bound on the size of the neighborhood that allows this structure is determined, both for finite and infinite horizons. Riccati inequalities that depend on the estimated trajectory are derived for finding the filter gain matrix and an algorithm for calculating the bound on the size of the above neighborhood is presented. Explicit formulas are obtained in the infinite horizon case for the minimum achievable disturbance attenuation level, the size of the neighborhood, and the corresponding filter gain.     

Synthesis and Properties of Photoisomerizable Derivatives of Isosorbide and Their Use in Cholesteric Filters

This paper describes the synthesis of photoisomerizable derivatives of isosorbide. These derivatives contain a stilbene or cinnamate moiety and can therefore be used as photoisomerizable chiral compounds in cholesteric liquid‐crystalline mixtures. The reflection wavelength of cholesteric layers made from these mixtures is increased by UV irradiation due to the fact that the Z‐isomers of these derivatives exhibit a lower helical twisting power than the corresponding E‐isomers. The cinnamate derivatives are very suitable for use in cholesteric color filters that find application in liquid‐crystal displays.     

In-vitro iron dialysability from legumes: Influence of phytate and extrusion cooking

In-vitro iron dialysability from five Italian legumes (mottled bean, white bean, faba bean, chickpea, lentil) and the influence of phytate and extrusion cooking on it were evaluated. Iron dialysability was 2·3 and 2·4% in mottled and white bean respectively, 1·2% infaba bean, 2·7% in chickpea and 1·1% in lentil. After extrusion cooking the flours showed a marked iron contamination and a decrease in iron dialysability, but these changes were significant only for mottled bean. Enzymic phytate removal induced an increase in iron dialysability > 100% in all the raw legumes except mottled bean which showed an increase of only 57%. This finding indicates that, although phytate consistently modifies iron dialysability, it is difficult to identify a quantitative relationship between phytate content and iron dialysability.     

Method of Reducing Error in Calculations of Active Power from Signal Samples

The paper presents the results of investigations into several methods of calculating the active power value from current and voltage signal samples. The accuracy attainable for nonsinusoidal signals whose frequency differs from the nominal one was determined. A new active power calculation method ensuring accurate results for sampling over two signal periods is proposed. The method uses a very simple computing algorithm.     

Immunoglobulin A levels in southern elephant seal (Mirounga leonina) milk during the suckling period

Immunoglobulin A (IgA) levels in milk samples from southern elephant seals at King George Island, Antarctica are reported. IgA levels were determined throughout the suckling period (approximately 23 days). The IgA concentration in southern elephant seal milk was lower than in other mammals and, unlike most mammalian milk, was not high during early lactation. There was not a definite pattern in IgA levels, which fluctuated within narrow limits throughout the suckling period (mean +/- SD, 30.81 +/- 6.38 mg IgA/100 g milk). If IgG was present, its level was too low to be detected by the method used. This is the first evidence in Southern elephant seal of the possibility of transmission of passive immunity after birth involving secretion of IgA in the milk.     

Effect of Aminated Chitosan-Coated Fe3O4 Nanoparticles with Applicational Potential in Nanomedicine on DPPG,DSPC, and POPC Langmuir Monolayers as Cell Membrane Models

An adsorption process of magnetite nanoparticles functionalized with aminated chitosan (Fe₃O₄-AChit) showing application potential in nanomedicine into cell membrane models was studied. The cell membrane models were formed using a Langmuir technique from three selected phospholipids with different polar head-groups as well as length and carbon saturation of alkyl chains. The research presented in this work reveals the existence of membrane model composition-dependent regulation of phospholipid-nanoparticle interactions. The influence of the positively charged Fe₃O₄-AChit nanoparticles on a Langmuir film stability, phase state, and textures is much greater in the case of these formed by negatively charged 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DPPG) than those created by zwitterionic 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphocholine (POPC). The adsorption kinetics recorded during penetration experiments show that this effect is caused by the strongest adsorption of the investigated nanoparticles into the DPPG monolayer driven very likely by the electrostatic attraction. The differences in the adsorption strength of the Fe₃O₄-AChit nanoparticles into the Langmuir films formed by the phosphatidylcholines were also observed. The nanoparticles adsorbed more easily into more loosely packed POPC monolayer.     

Novel Cell Permeable Polymers of N-Substituted L-2,3-Diaminopropionic Acid (DAPEGs) and Cellular Consequences of Their Interactions with Nucleic Acids

The present study aimed to synthesize novel polycationic polymers composed of N-substituted L-2,3-diaminopropionic acid residues (DAPEGs) and investigate their cell permeability, cytotoxicity, and DNA-binding ability. The most efficient cell membrane-penetrating compounds (O2Oc-Dap(GO2)_n-O2Oc-NH₂, where n = 4, 6, and 8) showed dsDNA binding with a binding constant in the micromolar range (0.3, 3.4, and 0.19 µM, respectively) and were not cytotoxic to HB2 and MDA-MB-231 cells. Selected compounds used in the transfection of a GFP plasmid showed high transfection efficacy and minimal cytotoxicity. Their interaction with plasmid DNA and the increasing length of the main chain of tested compounds strongly influenced the organization and shape of the flower-like nanostructures formed, which were unique for 5/6-FAM-O2Oc-[Dap(GO2)]₈-O2Oc-NH₂ and typical for large proteins.     

Tau Exon 10 Inclusion by PrPC through Downregulating GSK3β Activity

Tau protein is largely responsible for tauopathies, including Alzheimer’s disease (AD), where it accumulates in the brain as insoluble aggregates. Tau mRNA is regulated by alternative splicing, and inclusion or exclusion of exon 10 gives rise to the 3R and 4R isoforms respectively, whose balance is physiologically regulated. In this sense, one of the several factors that regulate alternative splicing of tau is GSK3β, whose activity is inhibited by the cellular prion protein (PrP^C), which has different physiological functions in neuroprotection and neuronal differentiation. Moreover, a relationship between PrP^C and tau expression levels has been reported during AD evolution. For this reason, in this study we aimed to analyze the role of PrP^C and the implication of GSK3β in the regulation of tau exon 10 alternative splicing. We used AD human samples and mouse models of PrP^C ablation and tau overexpression. In addition, we used primary neuronal cultures to develop functional studies. Our results revealed a paralleled association between PrP^C expression and tau 4R isoforms in all models analyzed. In this sense, reduction or ablation of PrP^C levels induces an increase in tau 3R/4R balance. More relevantly, our data points to GSK3β activity downstream from PrP^C in this phenomenon. Our results indicate that PrP^C plays a role in tau exon 10 inclusion through the inhibitory capacity of GSK3β.