HPLC ANALYSIS OF ALL POSITIONAL ISOMERS OF THE MONOHYDROPEROXIDES FORMED BY SOYBEAN LIPOXYGENASES DURING OXIDATION OF LINOLEIC ACID

Linoleic acid was oxidized by soybean lipoxygenases I and II (LOX-I and LOX-II). The monohydroperoxides (HPOD) formed were isolated and then hydrogenated. The mixtures of hydroxystearic acid isomers obtained were converted to phenacylesters and analyzed by HPLC. The isomers were identified on the basis of cochromatography with reference materials and mass spectrometry. It was shown that LOX-II forms mainly the 9-and 13-HPOD (94%) and in addition the 8-, 10-, 12- and 14-HPOD as minor components (6%) of the monohydroperoxide fraction. The minor hydroperoxides were absent when the catalyst was LOX-I. The presence of the poly ene crocin in the reaction system containing LOX-II changed the composition of the HPOD mixture. The proportion of the 13-HPOD increased at the expense of both the 9-HPOD and the minor hydroperoxides.     

The removal of arsenic from （ground）-water by adsorbent loaded in polymeric microspheres

Arsenic is a natural tasteless and odourless element,existing in the earth’s crust at average levels of between two and five thousands micrograms per liter (parts per million) . Arsenic is highly toxic to humans, who are exposed to it primarily from air,food and water. The occurrence of arsenic in groundwater is due to geological composition of soil. High concentrations of arsenic in water are the result of dissolution or desorption of ferric oxides and the oxidation of mineral arsenopyrites. Arsenic in drinking water has an important impact on the human health,especially in the less developed countries. Different methods exist to remove arsenic from aquatic media,and one of them is by adsorption. In this work,the adsorption of both As(III) and As(V) by means of novel microspheres has been investigated. In particular,TiO2 has been embedded into polymeric microspheres PES (PolyEtherSulphone) and PEEK-WC (PolyEtherEther-Ketone) . The main advantages of this encapsulation adsorption material are: no loss of adsorbents into the water stream,easy to be used and scaled-up.     

Correlation of Ⅲ/Ⅴ semiconductor etch results with physical parameters of high-density reactive plasmas excited by electron cyclotron resonance

Reactive ion etching is the interaction of reactive plasmas with surfaces. To obtain a detailed understanding of this process, significant properties of reactive composite low-pressure plasmas driven by electron cyclotron resonance(ECR) were investigated and compared with the radial uniformity of the etch rate. The determination of the electronic properties of chlorine-and hydrogen-containing plasmas enabled the understanding of the pressure-dependent behavior of the plasma density and provided better insights into the electronic parameters of reactive etch gases. From the electrical evaluation of I(V) characteristics obtained using a Langmuir probe,plasmas of different compositions were investigated. The standard method of Druyvesteyn to derive the electron energy distribution functions by the second derivative of the I(V)characteristics was replaced by a mathematical model which has been evolved to be more robust against noise, mainly, because the first derivative of the I(V) characteristics is used. Special attention was given to the power of the energy dependence in the exponent. In particular, for plasmas that are generated by ECR with EM modes, the existence of Maxwellian distribution functions is not to be taken as a self-evident fact, but the bi-Maxwellian distribution was proven for Ar-and Kr-stabilized plasmas. In addition to the electron temperature, the global uniform discharge model has been shown to be useful for calculating the neutral gas temperature. To what extent the invasive method of using a Langmuir probe could be replaced with the noninvasive optical method of emission spectroscopy, particularly actinometry, was investigated,and the resulting data exhibited the same relative behavior as the Langmuir data. The correlation with etchrate data reveals the large chemical part of the removal process—most striking when the data is compared with etching in pure argon. Although the relative amount of the radial variation of plasma density and etch rate is approximately ?5%, the etch rate shows a slightly concave shape in contrast to the plasma density.     

Correlation of III/V semiconductor etch results with physical parameters of high-density reactive plasmas excited by electron cyclotron resonance

Reactive ion etching is the interaction of reactive plasmas with surfaces. To obtain a detailed understanding of this process, significant properties of reactive composite low-pressure plasmas driven by electron cyclotron resonance (ECR) were investigated and compared with the radial uniformity of the etch rate. The determination of the electronic properties of chlorine-and hydrogen-containing plasmas enabled the understanding of the pressure-dependent behavior of the plasma density and provided better insights into the electronic parameters of reactive etch gases. From the electrical evaluation of I(V ) characteristics obtained using a Langmuir probe, plasmas of different compositions were investigated. The standard method of Druyvesteyn to derive the electron energy distribution functions by the second derivative of the I(V ) characteristics was replaced by a mathematical model which has been evolved to be more robust against noise, mainly, because the first derivative of the I(V ) characteristics is used. Special attention was given to the power of the energy dependence in the exponent. In particular, for plasmas that are generated by ECR with EM modes, the existence of Maxwellian distribution functions is not to be taken as a self-evident fact, but the bi-Maxwellian distribution was proven for Ar-and Kr-stabilized plasmas. In addition to the electron temperature, the global uniform discharge model has been shown to be useful for calculating the neutral gas temperature. To what extent the invasive method of using a Langmuir probe could be replaced with the non-invasive optical method of emission spectroscopy, particularly actinometry, was investigated, and the resulting data exhibited the same relative behavior as the Langmuir data. The correlation with etchrate data reveals the large chemical part of the removal process—most striking when the data is compared with etching in pure argon. Although the relative amount of the radial variation of plasma density and etch rate is approximately ±5%, the etch rate shows a slightly concave shape in contrast to the plasma density.     

Review of free software tools for image analysis of fluorescence cell micrographs

An increasing number of free software tools have been made available for the evaluation of fluorescence cell micrographs. The main users are biologists and related life scientists with no or little knowledge of image processing. In this review, we give an overview of available tools and guidelines about which tools the users should use to segment fluorescence micrographs. We selected 15 free tools and divided them into stand‐alone, Matlab‐based, ImageJ‐based, free demo versions of commercial tools and data sharing tools. The review consists of two parts: First, we developed a criteria catalogue and rated the tools regarding structural requirements, functionality (flexibility, segmentation and image processing filters) and usability (documentation, data management, usability and visualization). Second, we performed an image processing case study with four representative fluorescence micrograph segmentation tasks with figure‐ground and cell separation. The tools display a wide range of functionality and usability. In the image processing case study, we were able to perform figure‐ground separation in all micrographs using mainly thresholding. Cell separation was not possible with most of the tools, because cell separation methods are provided only by a subset of the tools and are difficult to parametrize and to use. Most important is that the usability matches the functionality of a tool. To be usable, specialized tools with less functionality need to fulfill less usability criteria, whereas multipurpose tools need a well‐structured menu and intuitive graphical user interface.     

Adsorption of Gas-Phase Phenanthrene on Atmospheric Water and Ice Films

The adsorption of gas-phase phenanthrene on atmospheric water and ice films was investigated in a flow-tube reactor with a view to understanding the processing of semi-volatile organic compounds by fog and snow. Air-water (ice) interface partition constants were obtained by measuring the mass uptake of phenanthrene vapor on thin water and ice films with varying thickness. Adsorption enthalpies and entropies were obtained from the temperature dependence of the interfacial partition constants. The surface adsorption is the predominant mechanism for the uptake of phenanthrene in water and ice films with small film thickness or at low temperature. The adsorption of phenanthrene to ice resembles that to sub-cooled water and there's no significant difference between the adsorption of phenanthrene to water and that to quasi liquid layer (QLL) if we take into account the uncertainties on the thermodynamic quantities measured. Molecular dynamics simulations of phenanthrene at air/water and air/ice interfaces support these experimental observations. The interfacial air-water and air-ice partition constants of phenanthrene increased greatly in the presence of surface-active substances, indicating that surface active materials effectively enhanced the uptake of organic compounds by atmospheric water and ice films.     

Clarified Natural Apple Juice: Production and Storage Stability of Juice and Concentrate

Thermal treatment (90°C, 20 sec) of Red Delicious apple mashes followed by Pectinase (0.02%;v/w), centrifugation, bentoniting and filtration resulted in a clear natural apple juice. Whole apple mash juice was faintly pink due to extracted skin anthocyanins and the 70° Brix concentrate prepared from the juice was ruby red. Pink juice browned extensively over 648 hr storage at 37°C and browning was associated with development of an absorption maximum at 446 nm. The ruby red concentrate stored at 37°C, turned orange (167 hr) darkening to brown (648 hr) and gave visible spectral scan typical of Maillard browning development.     

奥钢联近终形异型坯浇铸技术

1前言 奥钢联近终形异型坯浇铸技术对于大型和中型型钢以及工字梁,与薄板坯生产扁材产品具有同样的优点.     

Recording Spatially Resolved Plasma Parameters in Microwave-Driven Plasmas

In an almost cubical reactor 90 l in volume which is intended to deposit organic polymers by plasma-enhanced chemical vapor deposition (PECVD), microwave power is coupled into the volume via a quartz window which extends to approximately 1/10 of the sidewall area. Since the plasma is excited locally, plasma parameters like electron temperature and plasma density are expected to exhibit a spatial variation. The compilation of these plasma quantities has been accomplished with a bendable single Langmuir probe. To isolate the tungsten wire against its grounded housing tube, it was coated with polyparylene. After having compared this construction with our Langmuir probe, which has been now in use for more than a decade, we have taken data of more than half the volume of the reactor with argon and have found a definitive radial inhomogenity for all plasma parameters. To investigate whether this conduct can be determined applying optical emission spectroscopy, we improved our spectrometer which had been used for endpoint detection purposes and plasma diagnostics in chlorine-containing ambients where we could detect also a spatial dependence. This behavior is discussed in terms of Lieberman’s global model.     

Aggregate production planning using chance-constrained goal programming

Multiple objective models have frequently been proposed to assist in solving aggregate production planning problems. Although such models are an improvement over those with single objectives, demand is usually considered deterministic. For this reason, previous attempts at solving production problems have often lacked realism and could not be successfully applied in many real decision environments. This paper suggests a chance-constrained goal programming (CCGP) approach to production planning which allows the decision maker to specify both probabilistic product demands and production line operating characteristics more in keeping with actual situations. The CCGP approach is based on the sequential solution of a linear programming formulation, allowing efficient solution of large-scale real-world problems using commercially available LP codes. The procedure is demonstrated with a hypothetical example, and proper interpretation of goal achievement is discussed. The findings in the paper are applicable whether preemptive goal programming or a weighted objective function approach is used.