On global Hessenberg based methods for solving Sylvester matrix equations

In the first part of this paper, we investigate the use of Hessenberg-based methods for solving the Sylvester matrix equation $AX+XB=C$. To achieve this goal, the Sylvester form of the global generalized Hessenberg process is presented. Using this process, different methods based on a Petrov–Galerkin or on a minimal norm condition are derived. In the second part, we focus on the SGl-CMRH method which is based on the Sylvester form of the Hessenberg process with pivoting strategy combined with a minimal norm condition. In order to accelerate the SGl-CMRH method, a preconditioned framework of this method is also considered. It includes both fixed and flexible variants of the SGl-CMRH method. Moreover, the connection between the flexible preconditioned SGl-CMRH method and the fixed one is studied and some upper bounds for the residual norm are obtained. In particular, application of the obtained theoretical results is investigated for the special case of solving linear systems of equations with several right-hand sides. Finally, some numerical experiments are given in order to evaluate the effectiveness of the proposed methods.     

Bond graph modeling,design and experimental validation of a photovoltaic/fuel cell/ electrolyzer/battery hybrid power system

This work presents a complete bond graph modeling of a hybrid photovoltaic-fuel cell-electrolyzer-battery system. These are multi-physics models that will take into account the influence of temperature on the electrochemical parameters. A bond graph modeling of the electrical dynamics of each source will be introduced. The bond graph models were developed to highlight the multi-physics aspect describing the interaction between hydraulic, thermal, electrochemical, thermodynamic, and electrical fields. This will involve using the most generic modeling approach possible for managing the energy flows of the system while taking into account the viability of the system. Another point treated in this work is to propose. In this work, a new strategy for the power flow management of the studied system has been proposed. This strategy aims to improve the overall efficiency of the studied system by optimizing the decisions made when starting and stopping the fuel cell and the electrolyzer. It was verified that the simulation results of the proposed system, when compared to simulation results presented in the literature, that the hydrogen demand is increased by an average of 8%. The developed management algorithm allows reducing the fuel cell degradation by 87% and the electrolyzer degradation by 65%. As for the operating time of the electrolyzer, an increment of 65% was achieved, thus improving the quality of the produced hydrogen. The Fuel Cell's running time has been decreased by 59%. With the ambition to validate the models proposed and the associated commands, the development of this study gave rise to the creation of an experimental platform. Using this high-performance experimental platform, experimental tests were carried out and the results obtained are compared with those obtained by simulation under the same metrological conditions.     

Ballistic behavior of plain and reinforced concrete slabs under high velocity impact

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete slabs. In this paper, we focus on the comparison of the performance of the plain and reinforced concrete slabs of unconfined compressive strength 41 MPa under ballistic impact. The concrete slab has dimensions of 675 mm × 675 mm × 200 mm, and is meshed with 8-node hexahedron solid elements in the impact and outer zones. The ogive-nosed projectile is considered as rigid element that has a mass of 0.386 kg and a length of 152 mm. The applied velocities vary between 540 and 731 m/s. 6 mm of steel reinforcement bars were used in the reinforced concrete slabs. The constitutive material modeling of the concrete and steel reinforcement bars was performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. The analysis was conducted using the commercial finite element package Abaqus/Explicit. Damage diameters and residual velocities obtained by the numerical model were compared with the experimental results and effect of steel reinforcement and projectile diameter were studies. The validation showed good agreement between the numerical and experimental results. The added steel reinforcements to the concrete samples were found efficient in terms of ballistic resistance comparing to the plain concrete sample.     

Design and Implementation of a Flexible Manufacturing Control System Using Neural Network

Design and implementation of a sequential controller based on the concept of artificial neural networks for a flexible manufacturing system are presented. The recurrent neural network (RNN) type is used for such a purpose. Contrary to the programmable controller, an RNN-based sequential controller is based on a definite mathematical model rather than depending on experience and trial and error techniques. The proposed controller is also more flexible because it is not limited by the restrictions of the finite state automata theory. Adequate guidelines of how to construct an RNN-based sequential controller are presented. These guidelines are applied to different case studies. The proposed controller is tested by simulations and real-time experiments. These tests prove the successfulness of the proposed controller performances. Theoretical as well as experimental results are presented and discussed indicating that the proposed design procedure using Elman's RNN can be effective in designing a sequential controller for event-based type manufacturing systems. In addition, the simulation results assure the effectiveness of the proposed controller to outperform the effect of noisy inputs.     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

Finishing of glass-ionomer cement (SEM study)

A total of 12 glass-ionomer cement specimens were utilized in the present study. The specimens were divided into two equal groups. The first group was used after 10 minutes from setting, while the second was utilized after 24 hours from setting. Each group was divided into three equal subgroups (2 specimens each). The first subgroups were finished under wet condition (wet finished). The second subgroups were dry finished. On the other hand, the third subgroups were kept undisturbed (as set) under mylar strips. The specimens surfaces were then examined by a Scanning Electron Microscope (SEM). It was found that, finishing of the specimens after 24 hours from setting demonstrated more acceptable surface topography either in wet or dry conditions than finishing after 10 minutes from setting. Moreover, the dry finished specimens displayed more acceptable surface topography than the wet finished specimens. On the other hand, the as set (undisturbed) specimens the most acceptable surface topography.     

Generalized Eigenvalue Decomposition Applied to Estimation of Spatial rPPG Distribution of Skin

Journal of Mathematical Imaging and Vision - Remote photoplethysmography (rPPG) has been at the forefront recently, thanks to its capacity in estimating non-contact physiological parameters such as...     

Eco-friendly Geopolymer Composite Based on Non-heat-treated Phosphate Sludge Reinforced With Polypropylene Fibers

Silicon - Geopolymers produced with metakaolin (MK) and thermally untreated phosphate sludge (PS) are beneficial and environmentally advantageous materials, but their fragility limits its...     

Lignin‐based polycondensation resins for wood adhesives

Lignin‐based wood adhesives are obtained that satisfy the requirements of relevant international standards for the manufacture of exterior‐grade wood particleboard. Formulations based on low molecular mass lignin and presenting an increase in the relative proportion of reactive points yield better results than the higher molecular mass lignin used in the past. These lignins allow a higher proportion of hydroxymethylation during preparation of methylolated lignins. These lignin‐based adhesives also yield acceptable results at particleboard pressing times that are sufficiently low to be of industrial significance. Lignin‐based wood adhesives, in which a nonvolatile nontoxic aldehyde (glyoxal) is substituted for formaldehyde in their preparation, are prepared and tested for application to wood panels such as particleboard. The adhesives yield good internal bond strength results for the panels, which are good enough to comfortably pass relevant international standard specifications for exterior‐grade panels. The adhesives also show sufficient reactivity to yield panels in press times comparable to that of formaldehyde‐based commercial adhesives. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1690–1699, 2007     

An image composition algorithm for handling global visual effects

Image composition is widely used in television and film industry to create synthetic visual effects. It requires seamless integration of different parts of two or more images into a single image. Existing image composition techniques only change the local contents of the resulting image while in many cases local changes may also require some global effects as well. For example, if the image of sun from one image is transferred to another image, the global brightness pattern should also be transferred. Unfortunately existing techniques cannot handle global effects of local content manipulations. This paper describes a novel image composition technique which captures global effects associated with a specific local content from one image and incorporates in the second image. In our proposed technique, all images are transformed to the frequency domain. The composite image is created in frequency domain by mixing different frequencies from multiple images and then transformed back to the spatial domain. We have experimented the proposed technique to shift the image of sun along with its global brightness pattern, the global effects of rain and also for transferring global texture pattern from one image to the other. In most of the cases the results produced by our algorithm appear far close to real images than state of the art existing image composition techniques.