Optimal Control of the Primary Drying Stage of Freeze Drying of Solutions in Vials Using Variational Calculus

The problem of operating freeze drying of pharmaceutical products in vials placed in trays of a freeze dryer to remove free water (in frozen state) at a minimum time was formulated as an optimal control problem. Two different types of freeze dryer designs were considered. In type I freeze dryer design, upper and lower plate temperatures were controlled together, while in type II freeze dryer design, upper and lower plate temperatures were controlled independently. The heat input to the material being dried and the drying chamber pressure were considered as control variables. Constraints were placed on the system state variables by the melting and scorch temperatures during primary drying stage. Necessary conditions of optimality for the primary drying stage of freeze drying process in vials are derived and presented. Furthermore, an approach for constructing the optimal control policies that would minimize the drying time for the primary drying stage was given. In order to analyze optimal control policy for the primary drying stage of the freeze-drying process in vials, a rigorous multi-dimensional unsteady state mathematical model was used. The theoretical approach presented in this work was applied in the freeze drying of skim milk. Significant reductions in the drying times of primary drying stage of freeze drying process in vials were obtained, as compared to the drying times obtained from conventional operational policies.     

Characterization of rheological properties of systems containing sugar substitutes and carrageenan

The effects of addition of κ-carrageenan to solutions containing 40% (w/w) sugar substitute on the rheological properties of these systems were investigated at 25 °C using a rotational viscometer at rotational speeds of 6, 12, 30, and 60 rev min⁻¹. The flow behaviour of the solutions was adequately described by the power law model with or without yield stress. The consistency index ( K ) and the flow behaviour index ( n ) were determined from shear stress vs. shear rate data. The flow parameters of the solutions depended on the carrageenan concentration. The apparent viscosities of the systems decreased with increasing shear rate, indicating pseudoplastic behaviour. The final carrageenan concentration was found to be an effective factor controlling the degree of sliminess of the model food systems studied.     

A capacitive threshold-logic gate

A dense and fast threshold-logic gate with a very high fan-in capacity is described. The gate performs sum-of-product and thresholding operations in an architecture comprising a poly-to-poly capacitor array and an inverter chain. The Boolean function performed by the gate is soft programmable. This is accomplished by adjusting the threshold with a dc voltage. Essentially, the operation is dynamic and thus, requires periodic reset. However, the gate can evaluate multiple input vectors in between two successive reset phases because evaluation is nondestructive. Asynchronous operation is, therefore, possible. The paper presents an electrical analysis of the gate, identifies its limitations, and describes a test chip containing four different gates of fan-in 30, 62, 127, and 255. Experimental results confirming proper functionality in all these gates are given, and applications in arithmetic and logic function blocks are described     

Microarchitectures for Managing Chip Revenues under Process Variations

As transistor feature sizes continue to shrink intothe sub-90nm range and beyond, the effects of process variationson critical path delay and chip yields have amplified. A commonconcept to remedy the effects of variation is speed-binning, bywhich chips from a single batch are rated by a discrete range offrequencies and sold at different prices. In this paper, we discussstrategies to modify the number of chips in different bins andhence enhance the profits obtained from them. Particularly, wepropose a scheme that introduces a small Substitute Cacheassociated with each cache way to replicate the data elementsthat will be stored in the high latency lines. Assuming a fixedpricing model, this method increases the revenue by as much as13.8% without any impact on the performance of the chips.     

Design of a Commercial Hybrid VTOL UAV System

For the last four decades Unmanned Air Vehicles (UAVs) have been extensively used for military operations that include tracking, surveillance, active engagement with weapons and airborne data acquisition. UAVs are also in demand commercially due to their advantages in comparison to manned vehicles. These advantages include lower manufacturing and operating costs, flexibility in configuration depending on customer request and not risking the pilot on demanding missions. Even though civilian UAVs currently constitute 3 % of the UAV market, it is estimated that their numbers will reach up to 10 % of the UAV market within the next 5 years. Most of the civilian UAV applications require UAVs that are capable of doing a wide range of different and complementary operations within a composite mission. These operations include taking off and landing from limited runway space, while traversing the operation region in considerable cruise speed for mobile tracking applications. This is in addition to being able traverse in low cruise speeds or being able to hover for stationary measurement and tracking. All of these complementary and but different operational capabilities point to a hybrid unmanned vehicle concept, namely the Vertical Take-Off and Landing (VTOL) UAVs. In addition, the desired UAV system needs to be cost-efficient while providing easy payload conversion for different civilian applications. In this paper, we review the preliminary design process of such a capable civilian UAV system, namely the TURAC VTOL UAV. TURAC UAV is aimed to have both vertical take-off and landing and Conventional Take-off and Landing (CTOL) capability. TURAC interchangeable payload pod and detachable wing (with potential different size variants) provides capability to perform different mission types, including long endurance and high cruise speed operations. In addition, the TURAC concept is to have two different variants. The TURAC A variant is an eco-friendly and low-noise fully electrical platform which includes 2 tilt electric motors in the front, and a fixed electric motor and ducted fan in the rear, where as the TURAC B variant is envisioned to use high energy density fuel cells for extended hovering time. In this paper, we provide the TURAC UAV’s iterative design and trade-off studies which also include detailed aerodynamic and structural configuration analysis. For the aerodynamic analysis, an in-house software including graphical user interface has been developed to calculate the aerodynamic forces and moments by using the Vortex Lattice Method (VLM). Computational Fluid Dynamics (CFD) studies are performed to determine the aerodynamic effects for various configurations For structural analysis, a Finite Element Model (FEM) of the TURAC has been prepared and its modal analysis is carried out. Maximum displacements and maximal principal stresses are calculated and used for streamlining a weight efficient fuselage design. Prototypes have been built to show success of the design at both hover and forward flight regime. In this paper, we also provide the flight management and autopilot architecture of the TURAC. The testing of the controller performance has been initiated with the prototype of TURAC. Current work focuses on the building of the full fight test prototype of the TURAC UAV and aerodynamic modeling of the transition flight.     

A case of split notochord syndrome: presence of dorsal enteric diverticulum adjacent to the dorsal enteric fistula

Like umblical enteric remnants (eg, umblical sinus and omphalomesenteric fistula), enteric remnants can be seen on the dorsal aspect of the body (dorsal enteric sinus, dorsal enteric fistula IDEF], dorsal enteric diverticulum) in conjunction with complete cleft of the vertebral column. Complete cleft of the vertebral column associated with gastrointestinal tract and central nervous system anomalies is known as "split notochord syndrome" (SNS). The authors present an unreported variant of SNS having dorsal enteric diverticulum adjacent to the DEF. The patient died 17 days after surgical repair.     

Synthesis,characterization and,swelling behavior of semi‐IPN nanocomposite hydrogels of alginate with poly(N‐isopropylacrylamide) crosslinked by nanoclay

pH and temperature responsive nanocomposite hydrogels were synthesized with sodium alginate (NaAlg), N‐isopropylacrylamide (NIPA), and nanoclay. The structure, morphology, thermal behavior, and swelling and deswelling behaviors of the hydrogels were studied. The NaAlgm/PNIPA/Clayn hydrogels revealed a highly porous structure in which the pore sizes decreased and the amount of pores increased with increasing the nanoclay content in the hydrogels. PNIPA retained its own characteristics regardless of the amount of NaAlg and nanoclay. The effect of pH and nanoclay content on the swelling and effect of temperature on the deswelling behavior were investigated. The equilibrium swelling ratios of the nanocomposite hydrogels increased with increasing the pH from 2 to 6. The maximum swelling was attained at pH 6. Deswelling increased with increasing the nanoclay content in the hydrogels. The hydrogels were found to be pH and temperature responsive. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43222.     

Effects of annealing on the structural and magnetic properties of flame spray pyrolyzed MnFe2O4 nanoparticles

In this study, manganese ferrite (MnFe₂O₄) nanoparticles were produced through flame spray pyrolysis (FSP). To investigate the effects of heat treatment, the nanoparticles were annealed between 400 and 650°C for 4 h in air in a comparative manner. The structural, chemical, morphological, and magnetic properties of the nanoparticles were evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), dynamic light scattering (DLS), and vibrating sample magnetometry (VSM), respectively. The XRD results showed that the nanoparticles synthesized by the FSP method exhibited the MnFe₂O₄ spinel ferrite structure. The annealing process led to the decomposition of MnFe₂O₄ into various phases. According to the morphological analysis, the as-synthesized particles were hemispherical–cubic in shape and had an average particle size of less than 100 nm. In addition, the chemical bond structures of the nanoparticles were confirmed in detail by XPS elemental analysis. The highest saturation magnetization was recorded as 33.50 emu/g for the as-produced nanoparticles. The saturation magnetization of the nanoparticles decreased with increasing annealing temperature, while coercivity increased.     

Distribution of hydrophilic and lipophilic antibacterial drugs in skim milk,cream, and casein

This study determined the distribution of drugs to different milk fractions according to their physicochemical properties. Hydrophilic drugs tend to concentrate in skim milk, whereas lipophilic drugs tend to concentrate in cream. The concentration of a drug in casein is related to its degree of binding to milk proteins. Thus, we aimed to determine whether withdrawal time in whole milk differs from that in cream, casein, and skim milk. Amoxicillin and tylosin were selected as prototype hydrophilic and lipophilic drugs, respectively. The study was conducted in vitro and in vivo to determine whether in vitro conditions reflect the distribution of drugs in the different milk fractions in vivo. The in vivo study was conducted using a crossover design on 6 healthy Holstein dairy cattle. First, amoxicillin (i.m., single dose, 14 mg/kg) was administered to cows. Following a 1-wk washout period, tylosin (i.m., single dose, 15 mg/kg) was administered. Concentrations of amoxicillin and tylosin in milk and milk fractions were measured using HPLC-UV. In the in vitro study, 0.04 to 400 μg/g of amoxicillin and 0.05 to 50 μg/g of tylosin were spiked to drug-free milk and the concentrations in milk and milk fractions were measured. In addition, the percentage of total protein in milk and milk fractions was determined. Amoxicillin accumulated more in skim milk than in cream and casein, both in vitro (92%) and in vivo (73%, skim milk-to-whole milk ratio). The distribution of tylosin in whole and skim milk was similar to that of amoxicillin in the in vitro study, in contrast to the accumulation of tylosin in cream seen in vivo. However, the accumulation ratio of tylosin in cream was lower than expected. By either method, tylosin was less concentrated in casein than in skim milk and cream. The percentage of total protein was similar in skim milk and whole milk and higher than in cream. Thus, amoxicillin accumulates less in cream and casein, suggesting that these fractions would pose a lower risk to the consumer. Tylosin was still present at the maximum residue limit (50 μg/kg) 24 h after injection in the casein fraction and 48 h after injection in the cream fraction.     

Determination of sulphonamide residues in cattle meats by the Charm-II system and validation with high performance liquid chromatography with fluorescence detection

The purpose of this study was determination of sulphonamide residues (sulphanilamide, sulphadiazine, sulphathiazole, sulphamerazine, sulphamethazine, sulphamethoxazole, and sulphadimethoxine) in cattle meat by the Charm II technique and the validation of sulphonamide levels by high performance liquid chromatography with fluorescence detector (HPLC-FLD). Of 157 meat samples, 9 samples (5.73%) were found positive by the Charm II method. To make quantitative confirmation of sulphonamide content of positive samples, HPLC-FLD was used and four samples were confirmed as positive. In HPLC analysis, the limit of detection (LOD) was in the range 8–15 μg/kg and the limit of quantification (LOQ) was 13–25 μg/kg. Average recoveries of sulphonamides ranged from 44.6% to 81% with relative standard deviations below 6% (n = 6). In conclusion, we consider that the results obtained in field screening by only using the Charm II system, as is common practice in Turkey and worldwide, are inadequate and thus the results should be confirmed by sensitive systems like HPLC.