Dopamine and intestinal mucosal tissue oxygenation in a porcine model of haemorrhage

Haemorrhage is associated with intestinal mucosal hypoxia and impaired gut barrier function. Dopamine increases oxygen delivery to the intestinal mucosa and may thus counteract haemorrhage-induced mucosal hypoxia. Jejunal mucosal tissue oxygen tension (mucosal PO2) and jejunal oxygen saturation of mucosal microvascular haemoglobin (mucosal HbO2) were measured in 14 anaesthetized pigs. Seven animals served as controls (group C) and seven received continuous infusion of dopamine 16 micrograms kg-1 min-1 (group D) while 45% of blood volume was removed in three equal increments. Resuscitation was performed using shed blood and fluid. Mean arterial pressure and systemic oxygen delivery decreasing significantly during haemorrhage and returned to baseline after resuscitation in both groups. Mucosal PO2 decreased from 4.4 to 1.7 kPa after haemorrhage (P < 0.01) and further to 1.5 kPa after resuscitation (P < 0.01) in group C whereas group D showed an increase from 3.9 to 5.9 kPa after the start of the dopamine infusion (P < 0.05), but no significant difference from baseline after haemorrhage (2.3 kPa) (ns) or resuscitation (3.1 kPa) (ns). Mucosal HbO2 decreased from 52 to 32% after haemorrhage (P < 0.05) and increased to near baseline (37%) (ns) after resuscitation in group C whereas group D showed no significant changes from baseline (54%) throughout the experiment. Comparison between groups showed higher mucosal PO2 and HbO2 values for group D animals after the start of the dopamine infusion (P < 0.05 each), after the first two steps of haemorrhage (P < 0.01 each) and after resuscitation (P < 0.05 each). We conclude that i.v. dopamine 16 micrograms kg-1 min-1 improved tissue oxygenation of the small intestinal mucosa during moderate haemorrhage and subsequent resuscitation.     

Application of Acoustic Wave Propagation Analysis Methods for Monitoring a Miscible Mixing Zone in Porous Media

The Biot's acoustics theory, which describes acoustic wave propagation in a porous medium, and computer simulation techniques were utilized to model the behavior of acoustic waves entering and leaving a mixing zone in a miscible displacement in porous media. The results indicate that the angles of waves produced by a mixing zone are equal to angles of waves produced by an abrupt fluid-fluid interface. Therefore, acoustic methods and a relationship between the incident, reflection, and transmission angles can be used to determine the location and thickness of the mixing zone during a miscible displacement process in porous media.     

Optimized scenario for rainfall forecasting using genetic algorithm coupled with artificial neural network

Rainfall forecasting plays many important role in water resources studies such as river training works and design of flood warning systems. Recent advancement in artificial intelligence and in particular techniques aimed at converting input to output for highly nonlinear, non-convex and dimensionalized processes such as rainfall field, provide an alternative approach for developing rainfall forecasting model. Artificial neural networks (ANNs), which perform a nonlinear mapping between inputs and outputs, are such a technique. Current literatures on artificial neural networks show that the selection of network architecture and its efficient training procedure are major obstacles for their daily usage. In this paper, feed-forward type networks will be developed to simulate the rainfall field and a so-called back propagation (BP) algorithm coupled with genetic algorithm (GA) will be used to train and optimize the networks. The technique will be implemented to forecast rainfall for a number of times using rainfall hyetograph of recording rain gauges in the Upper Parramatta catchment in the western suburbs of Sydney, Australia. Results of the study showed the structuring of ANN network with the input parameter selection, when coupled with GA, performed better compared to similar work of using ANN alone.     

Effect study of hexagonal mesoporous silica/polyaniline nanocomposite on the structural properties of polysulfone membranes and its heavy metal removal efficiency

New mixed matrix membranes of polysulfone were synthesized by different content of hexagonal mesoporous silica coated by polyaniline and used for nickel and lead ion removal. The membranes were characterized by FESEM, XRD, BET, TGA, and FTIR, and zeta potential measurements. The results showed that PANi/HMS particles enhanced the membrane porosity and permeability. These effects were explained according to an increase of the membrane hydrophilicity due to the formation of new functional groups during membrane casting. The results showed that metal ion rejection was performed by a filtration–adsorption mechanism, resulting in fixation of metal ions on the active sites of membranes.     

Phase coexistence in Bi1−x Pr x FeO3 ceramics

Bi_1?x Pr _x FeO₃ ceramics across the rhombohedral–orthorhombic phase boundary have been studied by X-ray diffraction, transmission electron microscopy, and differential scanning calorimetry. The structural phase transitions in Bi_1?x Pr _x FeO₃ driven by doping concentration and temperature are significantly different from those in BiFeO₃ compounds doped with other rare-earth elements. The features of the structural transformations have been discussed based on the specific character of the chemical bonds associated with praseodymium ions. The detailed study of the crystal structure evolution clarified the ranges of both single-phase and phase coexistence regions at different temperatures and dopant concentrations. For x = 0.125, compound extraordinary three-phase coexistence state has been observed in a narrow temperature range at about 400 °C. The results explicate driving forces of the structural transitions and elucidate the origin of the remarkable physical properties of BiFeO₃-based compounds near the morphotropic phase boundary.     

Optimization of a Three-Component Green Corrosion Inhibitor Mixture for Using in Cooling Water by Experimental Design

Factors such as inhibitor concentration, solution hydrodynamics, and temperature influence the performance of corrosion inhibitor mixtures. The simultaneous studying of the impact of different factors is a time- and cost-consuming process. The use of experimental design methods can be useful in minimizing the number of experiments and finding local optimized conditions for factors under the investigation. In the present work, the inhibition performance of a three-component inhibitor mixture against corrosion of St37 steel rotating disk electrode, RDE, was studied. The mixture was composed of citric acid, lanthanum(III) nitrate, and tetrabutylammonium perchlorate. In order to decrease the number of experiments, the L16 Taguchi orthogonal array was used. The “control factors” were the concentration of each component and the rotation rate of RDE and the “response factor” was the inhibition efficiency. The scanning electron microscopy and energy dispersive x-ray spectroscopy techniques verified the formation of islands of adsorbed citrate complexes with lanthanum ions and insoluble lanthanum(III) hydroxide. From the Taguchi analysis results the mixture of 0.50 mM lanthanum(III) nitrate, 0.50 mM citric acid, and 2.0 mM tetrabutylammonium perchlorate under the electrode rotation rate of 1000 rpm was found as optimum conditions.     

Tartaric Acid as a Non-toxic and Environmentally-Friendly Anti-scaling Material for Using in Cooling Water Systems: Electrochemical and Surface Studies

Because of the major limitations in drinking water resources, the industries need to use unprocessed water sources for their cooling systems; these water resources contain major amount of hardening cations. So, mineral scales are formed in cooling water systems during the time and cause major problems. The use of green anti-scaling materials such as carboxylic acids is considered due to their low risks of environmental pollution. In the present work, the scale inhibition performance of tartaric acid as a green organic material was evaluated. Chemical screening tests, cathodic and anodic voltammetry measurements and electrochemical impedance spectroscopy (EIS), field emission scanning electron microscopy (FESEM), energy-dispersive x-ray and x-ray diffraction, were used for the evaluation of the scale inhibition performance. The results showed that tartaric acid can prevent calcium carbonate precipitation significantly. The hard water solution with 2.0 mM of tartaric acid indicated the highest scale inhibition efficiency (ca. 68%). The voltammetry, EIS and FESEM results verified that tartaric acid can form smooth and homogeneous film on steel surface through formation of Fe(III)-tartrate complexes and retard the local precipitation of calcium carbonate deposits.     

Facile Synthesis of Ferrocene-Based Polyamides and Their Organic Analogues Terpolyamides: Influence of Aliphatic and Aromatic Sequences on Physico-Chemical Characteristics

Efforts have been devoted to synthesize and characterize processable polymers with desired properties. Herein, four different series of aromatic and aliphatic terpolyamides were prepared via solution phase polycondensation of 4,4′-oxydianiline and hexamethylenediamine (HMDA) with various diacids chlorides (isophthalyol dichloride, terepthalyol dichloride, 1, 1′-ferrocene dicarboxylic acid chloride and trans-azobenzene-4, 4′-dicarbonyl chloride). The structural, morphological and physico-chemical nature of as prepared polymers was explored by Fourier-transform infrared spectroscopy, scanning electron microscopy, thermal analysis (TGA and DSC), and wide-angle x-ray diffraction. Moreover, an aliphatic diamine was incorporated in varying concentration as a flexible methylene spacer and the effect of its concentration on the properties of polyamides was also studied. Changes in various physico-chemical properties such as solubility, inherent viscosity, surface morphology and flame retarding behaviour were investigated. Marked difference in morphology and solubility was observed with the change in the ratio of segments in the chain. Inherent viscosities of polymers ranged from 1.8052–1.6274 dl/g indicating reasonably moderate molecular weights. Interestingly, ferrocene based aromatic polymers were more thermally stable (T_g 260 °C, T_i 310 °C, T_h 525 °C, T_f 720 °C, for PF₀), and also found to exhibit best flame retarding behavior (limiting oxygen index value for PF₀is LOI 33.15%).

     

Structural and magnetic properties of erbium doped nanocrystalline Li–Ni ferrites

A series of nanocrystalline Li_0.25Ni_0.5Fe_2.25−xEr_xO₄ (x=0.00, 0.02, 0.06, 0.08, and 0.10) ferrite powders, having a cubic spinel crystal structure and a low value of coercivity, was synthesized by the sol–gel auto-combustion route. The structure, morphology and magnetic properties of the prepared nanoferrites were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and the magnetic property measurement system (MPMS). A well-defined single phase spinel structure is confirmed in all the samples by X-ray diffraction analysis. The lattice parameters of the samples increase slightly with increasing the erbium content. The crystallite size of the Er-doped samples is smaller than that of pure Li–Ni ferrite, and decrease regularly in the range of 36.0–14.5 nm. It has been observed that the magnetic properties of these ferrites are strongly influenced by the added erbium content. The magnetic measurements indicate that saturation magnetization (M_s) and coercivity (H_c) decrease gradually with the increase of Er content in the lattice.     

The odontogenic differentiation of human dental pulp stem cells on hydroxyapatite-coated biodegradable nanofibrous scaffolds

The authors aimed to design nanofibrous (NF) scaffolds that facilitate odontogenic and osteogenic differentiation of human dental pulp-derived mesenchymal stem cells (DPSCs) in vitro. For this purpose, hydroxyapatite (HA)–loaded poly (L-lactic acid)/poly (?-caprolactone) (PLLA:PCL 2;1) blend NFs were prepared using the electrospinning method. Alizarin red activity and cell viability were evaluated by MTT assay, and SEM revealed the proliferation properties of NF scaffolds. QRT-PCR results demonstrated that HA-loaded PLLA/PCL can lead to osteoblast/odontoblast differentiation in DPSCs through the up-regulation of related genes, thus indicating that electrospun biodegradable PCL/PLA/HA has remarkable prospects as scaffolds for bone and tooth tissue engineering.