193-nm lithography

The trend in microelectronics toward printing features 0.25 μm and below has motivated the development of lithography at the 193-nm wavelength of argon fluoride excimer lasers. This technology is in its early stages, but a picture is emerging of its strengths and limitations. The change in wavelength from 248 to 193 nm will require parallel progress in projection systems, optical materials, and photo-resist chemistries and processes. This paper reviews the current status of these various topics as they have been engineered under a multiyear program at MIT Lincoln Laboratory     

From information to probability: An axiomatic approach—Inference is information processing

We define the very rich language of composed conditionals on a three‐valued logic and use this language as the communication tool between man and machine. Communication takes place for three reasons: knowledge acquisition, query, and response. Learning, thinking, and answering questions are of a pure information theoretical nature. The pivot of this knowledge processing concept is the amount of information (bit) we receive if a conditional becomes true. We follow an axiomatic approach to information theory rather than the classical probabilistic approach of Shannon; information comes first, and then comes probability. In the light of this philosophy, query and response experience new interpretations. Both, acquisition and response are realized by maximizing entropy and minimizing relative entropy, respectively. The iterative solution of these mathematical optimization problems gives new insights into the adaptation of prior knowledge to new information. Our expert system shell SPIRIT supports this kind of knowledge processing, which will be established by suitable examples. © 2003 Wiley Periodicals, Inc.     

Fast, large-scale model predictive control by partial enumeration

Partial enumeration (PE) is presented as a method for treating large, linear model predictive control applications that are out of reach with available MPC methods. PE uses both a table storage method and online optimization to achieve this goal. Versions of PE are shown to be closed-loop stable. PE is applied to an industrial example with more than 250 states, 32 inputs, and a 25-sample control horizon. The performance is less than 0.01% suboptimal, with average speedup factors in the range of 80-220, and worst-case speedups in the range of 4.9-39.2, compared to an existing MPC method. Small tables with only 25-200 entries were used to obtain this performance, while full enumeration is intractable for this example.     

Ionic conductivity of synthetic analcime,sodalite and offretite

The ionic conductivity of pressed pellets of dehydrated synthetic analcime, sodalite and offretite was determined by a.c. measurements within the range 10 Hz to 10 MHz. The ionic conductivity values of those zeolites exchanged with various monovalent cations were determined by the complex impedance plane method. The conduction activation energies range between 63 and 101 kJ mol^–1. Sodium analcime shows the best ionic conductivity, namely 1.8×10^–4–1 cm^–1 at 400° C. A comparison with the conductivity of other ion-conducting solids was made.     

Diffusion of the hydroxide-ion in liquid CaO-Al2O3-slags by application of Fourier-Transform-lnfrared-Spectroscopy

Water vapour is soluted in liquid CaO-Al₂O₃-slags as OH^?-ion. To determine the diffusion coefficient a capillary technique is used. Roughly 5 cm long platinum capillaries filled with liquid slag are equilibrated at 1500 and 1600 °C and bar different times and then are quenched in liquid D₂O. By dividing these capillaries into roughly 3 mm long segments enough sample substance is won to obtain FT-IR spectra of the OH-band. From measurement of the integral extinction of the OH-band and OH^?-concentration profile through the capillary is obtained. FT-IR-spectroscopy is very suitable for this capillary technique because it needs only very little sample substance.     

Out-of-Field Hippocampus from Partial-Body Irradiated Mice Displays Changes in Multi-Omics Profile and Defects in Neurogenesis

The brain undergoes ionizing radiation exposure in many clinical situations, particularly during radiotherapy for brain tumors. The critical role of the hippocampus in the pathogenesis of radiation-induced neurocognitive dysfunction is well recognized. The goal of this study is to test the potential contribution of non-targeted effects in the detrimental response of the hippocampus to irradiation and to elucidate the mechanisms involved. C57Bl/6 mice were whole body (WBI) or partial body (PBI) irradiated with 0.1 or 2.0 Gy of X-rays or sham irradiated. PBI consisted of the exposure of the lower third of the mouse body, whilst the upper two thirds were shielded. Hippocampi were collected 15 days or 6 months post-irradiation and a multi-omics approach was adopted to assess the molecular changes in non-coding RNAs, proteins and metabolic levels, as well as histological changes in the rate of hippocampal neurogenesis. Notably, at 2.0 Gy the pattern of early molecular and histopathological changes induced in the hippocampus at 15 days following PBI were similar in quality and quantity to the effects induced by WBI, thus providing a proof of principle of the existence of out-of-target radiation response in the hippocampus of conventional mice. We detected major alterations in DAG/IP3 and TGF-β signaling pathways as well as in the expression of proteins involved in the regulation of long-term neuronal synaptic plasticity and synapse organization, coupled with defects in neural stem cells self-renewal in the hippocampal dentate gyrus. However, compared to the persistence of the WBI effects, most of the PBI effects were only transient and tended to decrease at 6 months post-irradiation, indicating important mechanistic difference. On the contrary, at low dose we identified a progressive accumulation of molecular defects that tended to manifest at later post-irradiation times. These data, indicating that both targeted and non-targeted radiation effects might contribute to the pathogenesis of hippocampal radiation-damage, have general implications for human health.     

Wet hydrogen peroxide catalytic oxidation (WHPCO) of organic waste in agro-food and industrial streams

This review discusses the use of iron- or copper-based solid catalysts in the wet oxidation using H₂O₂ as oxidant of organic molecules present in agro-food and industrial waste aqueous streams. After an introduction on the advantages and limits of using wet hydrogen peroxide catalytic oxidation (WHPCO) as opposite to wet air catalytic oxidation (WACO), the contribution shortly analyses recent results in the field in order to evidence new trends and open issues. More specific examples discussed regard the performances of Fe/zeolite and Fe-containing pillared clays in the oxidation of selected molecules (p-coumaric acid, propionic acid) of relevance for the treatment of organic waste from agro-food production (with reference especially to olive oil milling wastewater). The application of WHPCO in the treatment of complex effluents from electronic industry is also shortly discussed.     

Correlation between configuration/conformation of zirconocenes on the stereoselectivity of the propylene polymerization reaction

Summary The catalytic performance (activity and polymer properties) of metallocenes with different symmetries in combination with methylaluminoxane (MAO) in the polymerization of propylene has been investigated at different temperatures, under standardized reaction conditions. The zirconocene rac-ethylene (⁵-1-indenyl) zirconium (IV) dichloride, with C₂ symmetry, produces isotatic polypropylene and isopropylidene(⁵-cyclopentadienyl (⁵-9-fluorenyl) zirconium (IV) dichloride, with C _S symmetry, syndiotactic polypropylene. The degree of the tacticity of these polymers increases with decreasing polymerization temperature. Only atactic polypropylene was formed with the unbridged zirconocenes bis(⁵-cyclopentadienyl) zirconium (IV) dichloride and bis(⁵-indenyl zirconium (IV) dichloride at any temperature investigated (10–60°C).     

SBS and SEBS block copolymers as impact modifiers for polypropylene compounds

Blends of polypropylene (PP) and thermoplastic elastomers (TPE), namely SBS (styrene‐butadiene‐styrene) and SEBS (styrene‐ethylene/1‐butene‐styrene) block copolymers, were prepared to evaluate the effectiveness of the TPE type as an impact modifier for PP and influence of the concentration of elastomer on the polymer properties. Polypropylene homopolymer (PP‐H) and ethylene–propylene random copolymer (PP‐R) were evaluated as the PP matrix. Results showed that TPEs had a nucleating effect that caused the PP crystallization temperature to increase, with SBS being more effective than SEBS. Microstructure characterization tests showed that in most cases PP/SEBS blends showed the smallest rubber droplets regardless of the matrix used. It was seen that SEBS is a more effective toughening agent for PP than SBS. At 0°C the Izod impact strength of the PP‐H/SEBS 30% b/w blend was twofold higher than the SBS strength, with the PP‐R/SEBS 30% b/w blend showing no break. A similar behavior on tensile properties and flexural modulus were observed in both PP/TPE blends. Yield stress and tensile strength decreased and elongation at break increased by expanding the dispersed elastomeric phase in the PP matrix. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 254–263, 2005