Optimization methods in inverse problems and applications to science and engineering

Optimization and Engineering -     

Two-step sinter-crystallization of K2O–CaO–P2O5–SiO2 (45S5-K) bioactive glass

Bioactive glasses and glass-ceramics (GCs) effectively regenerate bone tissue, however most GCs show improved mechanical properties. In this work, we developed and tested a rarely studied bioactive glass composition (24.4K₂O-26.9CaO-46.1SiO₂-2.6P₂O₅ mol%, identified as 45S5-K) with different particle sizes and heating rates to obtain a sintered GC that combines good fracture strength, low elastic modulus, and bioactivity. We analyzed the influence of the sintering processing conditions in the elastic modulus, Vickers microhardness, density, and crystal phase formation in the GC. The best GC shows improved properties compared with its parent glass. This glass achieves a good densification degree with a two-step viscous flow sintering approach and the resulting GC shows as high bioactivity as that of the standard 45S5 Bioglass®. Furthermore, the GC elastic modulus (56 GPa) is relatively low, minimizing stress shielding. Therefore, we unveiled the glass sintering behavior with concurrent crystallization of this complex bioactive glass composition and developed a potential GC for bone regeneration.     

Maskless Preparation of Spatially-Resolved Plasmonic Nanoparticles on Polydimethylsiloxane via In Situ Fluoride-Assisted Synthesis

Here, a fluoride-assisted route for the controlled in-situ synthesis of metal nanoparticles (NPs) (i.e., AgNPs, AuNPs) on polydimethylsiloxane (PDMS) is reported. The size and coverage of the NPs on the PDMS surface are modulated with time and over space during the synthetic process, leveraging the improved yield (10×) and faster kinetics (100×) of NP formation in the presence of F⁻ ions, compared to fluoride-free approaches. This enables the maskless preparation of both linear and step gradients and patterns of NPs in 1D and 2D on the PDMS surface. As an application in flexible plasmonics/photonics, continuous and step-wise spatial modulations of the plasmonic features of PDMS slabs with 1D and 2D AgNP gradients on the surface are demonstrated. An excellent spatially resolved tuning of key optical parameters, namely, optical density from zero to 5 and extinction ratio up to 100 dB, is achieved with AgNP gradients prepared in AgF solution for 12 minutes; the performance are comparable to those of commercial dielectric/interference filters. When used as a rejection filter in optical fluorescence microscopy, the AgNP-PDMS slabs are able to reject the excitation laser at 405 nm and retain the green fluorescence of microbeads (100 µm) used as test cases.     

Effects of Prior Annealing on the Spark Plasma Sintering of Nanostructured Y2O3 Powders

The effects produced by annealing Y₂O₃ nanopowders on their spark plasma sintering (SPS) behavior are systematically investigated in this work. It is found that the annealed powders display higher sinterability with respect to the as‐received ones. Indeed, the maximum densification level reached from pristine powders is about 97.5%, whereas density decreases when further increasing either the sintering temperature or the dwell time. In contrast, the density of SPS products obtained from pretreated powder monotonically increases with temperature and processing time, thus leading to fully dense materials in 30 min at 1050°C and 60 MPa. Correspondingly, it is found that the annealing treatment markedly inhibits grain coarsening during SPS. Thus, dense translucent samples with grain size below 100 nm can be attained from annealed powders. On the other hand, white‐opaque specimens with significantly coarser microstructures (up to 1‐μm‐sized grains) are obtained when pristine powders are directly processed under the same sintering conditions. Furthermore, it is observed that the annealing treatment of SPS samples in air allows for graphite contamination removal, whereas no improvement in term of light transmittance is produced.     

Application of the novel Droplet digital PCR technology for identification of meat species

The authenticity and traceability of meat products are issues of primary importance to ensure food safety. Unfortunately, food adulteration (e.g. the addition of inexpensive cuts to minced meat products) and mislabelling (e.g. the inclusion of meat from species other than those declared) happens frequently worldwide. The aim of this study was to apply a droplet digital PCR assay for the detection and quantification (copies μL⁻¹) of the beef, pork, horse, sheep, chicken and turkey in meat products. The analysis conducted on commercial meat showed the presence of traces of DNA from other animal species than those declared. We show that the method is highly sensitive, specific and accurate (accuracy = 100%). This method could be adopted by competent food safety authorities to verify compliance with the labelling of meat products and to ensure quality and safety throughout the meat supply chain, from primary production to consumption.     

Treatment and prognosis of secondary glaucoma in Fuchs' heterochromic iridocyclitis

After reviewing the records of 111 patients with Fuchs' heterochromic iridocyclitis, we studied the therapy and prognosis of secondary glaucoma in 30 of these 111 patients (27%) who had glaucoma or could be considered glaucoma suspects. Maximal medical therapy was unsuccessful in 22 of the 30 patients (73%). Surgical intervention (mostly trabeculectomies, half with 5-fluorouracil) successfully controlled intraocular pressure (< or = 21 mm Hg with or without medication) in 13 of the 18 operated-on patients (72%) after a mean follow-up of 26 months. All successfully operated-on patients retained a visual acuity of 20/80 or better. We had favorable results, possibly because of modern surgical techniques (use of 5-fluorouracil, sodium hyaluronate) or earlier surgical intervention, or both.