Influence of SiC content on the oxidation of carbon fibre reinforced ZrB2/SiC composites at 1500 and 1650 °C in air

The microstructure and the oxidation resistance in air of continuous carbon fibre reinforced ZrB₂–SiC ceramic composites were investigated. SiC content was varied between 5–20?vol.%, while maintaining fibre content at ～40?vol.%. Short term oxidation tests in air were carried out at 1500 and 1650?°C in a bottom-up loading furnace. The thickness, composition and microstructure of the resulting oxide scale were analysed by SEM-EDS and X-Ray diffraction. The results show that contents above 15?vol.% SiC ensure the formation of a homogeneous protective borosilicate glass that covers the entire sample and minimizes fibre burnout. The scale thickness is ～90?μm for the sample containing 5?vol.% SiC and decreases with increasing SiC content.     

The first five responses in the method of constant stimuli.

Examined whether the method of constant stimuli with the standard presented first produces a constant error that depends on adaptation level. 120 university students were shown 5 series of 5 pairs of standard and variable lines. They had to decide whether the standard or the variable was longer or shorter than the preceding variable, or standard, respectively. In order to establish when the constant error occurred, the point of subjective equality was determined for each response. It was found that the 1st response was nearly random. The constant error was present from the 2nd response, and its magnitude did not change in succeeding series, contrary to expectations from adaptation-level theory. (French abstract) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Parents and procedures: a randomized controlled trial

INTRODUCTION: Previous work has shown that parents prefer to be present when their children undergo common invasive procedures, although physicians are ambivalent about parental presence. PURPOSE: To determine the effect of a parent-focused intervention on the pain and performance of the procedure, anxiety of parents and clinicians, and parental satisfaction with care. POPULATION: Children younger than 3 years old undergoing venipuncture, intravenous cannulation, or uretheral catheterization. SETTING: Pediatric emergency department of Boston City Hospital. DESIGN: Randomized controlled trial with three groups; parents present and given instructions on how to help their children; parents present, but no instructions given; and parents not present. INTERVENTION: The parents were instructed to touch, talk to, and maintain eye contact during the procedure. RESULTS: A total of 431 parents was randomized to the intervention (N = 153), present (N = 147), and not present (N = 131) groups. The groups were equivalent with respect to measured sociodemographic variables and parents' previous experience in the pediatric emergency department. No differences emerged with respect to pain (3-point scale measured by parent and clinician, and analysis of cry); performance of the procedure (number of attempts, completion of procedure by first clinician, time); clinician anxiety; or parental satisfaction with care. Parents who were present were more likely to rate the pain of the children as extreme/severe (52%) in comparison to clinicians (15%, kappa .07, poor agreement) and were significantly less anxious than parents who were not present. CONCLUSION: Overall, the intervention was not effective in reducing the pain of routine procedures. Parental presence did not negatively affect performance of the procedure or increase clinician anxiety. Parents who were present were less anxious than those who were not present. CLINICAL IMPLICATION: In general, parents have indicated that they want to be present when their children undergo procedures. The results of this study challenge the traditional belief that parental presence negatively affects our ability to successfully complete procedures. We should encourage parents who want to be present to stay during procedures.     

Information Sharing Among Disaster Responders - An Interactive Spreadsheet-Based Collaboration Approach

Recent natural disasters have led crisis management organizations to revise their protocols so as to rely on the contribution of a wider range of actors, including simple citizens as well as expert operators, to support decision making activities. Reliable and timely information sharing among members of distributed teams of disaster responders has become paramount for the success of the overall crisis management process. In this paper we propose a crisis management system based on spreadsheet-mediated collaboration among on-site responders and decision makers. To share data a common spreadsheet artifact has been developed by using a participatory design approach which is accessed through mobile user interfaces. The evaluation results showed that the use of the spreadsheet artifact has resulted in more effective decision making relating to set of earthquake management scenarios in high-risk areas located in Italy.     

1H nuclear magnetic resonance study of polyurethane prepolymers from toluene diisocyanate and polypropylene glycol

Polyurethane prepolymers prepared from toluene 2,4‐diisocyanate, toluene 2,6‐diisocyanate, and polypropylene glycol with a ratio between the isocyanate and hydroxyl groups equal to 2 were analyzed by ¹H nuclear magnetic resonance (NMR) spectroscopy in acetone‐d₆. Different temperatures and concentrations were used. Toluene 2,4‐dimethylurethane and toluene 2,6‐dimethylurethane were synthesized and used as model compounds to assign prepolymers signals. Measurements of spin–lattice relaxation time T₁ by “inversion recovery” experiments were carried out on toluene 2,4‐diisocyanate, toluene 2,6‐diisocyanate, toluene 2,4‐dimethylurethane, toluene 2,6‐dimethylurethane, and polyurethane prepolymers. Differences in T₁ times were used to interpret prepolymers spectra, by means of the strong observed effect on protons due to the presence of adjacent isocyanate groups. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 347–357, 2003     

A framework for home energy management and its experimental validation

With the Smart Grid revolution and the increasing interest in renewable energy sources, the management of the electricity consumption and production of individual households and small residential communities is becoming an essential element of new power systems. The electric energy chain can greatly benefit from a flexible interaction with end-users based on the optimization of load profiles and the exploitation of local generation and energy storage. This paper proposes a framework for the development of a complete energy management system for individual residential units and small communities of domestic users, taking into account both the power system and the final users’ perspectives. All the main elements of the framework are considered, and contributions are provided on the users’ habits profiling, electricity generation forecast, energy load, and storage optimization. Specifically, we propose a linear regression model to predict the photovoltaic panels production, a stochastic method to forecast the home appliances usage, and two optimization models to optimize the electricity management of residential users with the goal of minimizing their bills. The study shows that it is possible to reduce the energy bill of residential users through the electricity optimization driven by dynamic energy prices. Moreover, remarkable improvements of the electric grid efficiency can be achieved with the cooperation among users, confirming that services for the coordination of the demand of groups of users allow huge benefits on the power system performance.     

Rapid and direct determination of fructose in food: A new osmium-polymer mediated biosensor

This paper describes the development and performance of a new rapid amperometric biosensor for fructose monitoring in food analysis. The biosensor is based on the activity of fructose dehydrogenase (FDH) immobilised into a carbon nanotube paste electrode according to two different procedures. The direct wiring of the FDH in a highly original osmium-polymer hydrogel was found to offer a better enzyme entrapment compared to the immobilisation of the enzyme in an albumin hydrogel. The optimised biosensor required only 5 U of FDH and kept the 80% of its initial sensitivity after 4 months. During this time, the biosensor showed a detection limit for fructose of 1 μM, a large linear range between 0.1 and 5 mM, a high sensitivity (1.95 μA cm⁻² mM), good reproducibility (RSD = 2.1%) and a fast response time (4 s).     

Exploitation of the Antibacterial Properties of Photoactivated Curcumin as ‘Green’ Tool for Food Preservation

In the search for non-chemical and green methods to counteract the bacterial contamination of foods, the use of natural substances with antimicrobial properties and light irradiation at proper light waves has been extensively investigated. In particular, the combination of both techniques, called photodynamic inactivation (PDI), is based on the fact that some natural substances act as photosensitizers, i.e., produce bioactive effects under irradiation. Notably, curcumin is a potent natural antibacterial and effective photosensitizer that is able to induce photodynamic activation in the visible light range (specifically for blue light). Some practical applications have been investigated with particular reference to food preservation from bacterial contaminants.     

Vapor barrier properties of polycaprolactone montmorillonite nanocomposites: effect of clay dispersion

Different compositions of poly(ε-caprolactone) (PCL) and (organo-modified) montmorillonite were prepared by melt blending or catalyzed ring opening polymerization of ε-caprolactone. Microphase composites were obtained by direct melt blending of PCL and sodium montmorillonite (MMT-Na⁺). Exfoliated nanocomposites were obtained by in situ ring opening polymerization of ε-caprolactone with an organo-modified montmorillonite (MMT-(OH)₂) by using dibutyltin dimethoxide as an initiator/catalyst. Intercalated nanocomposites were formed either by melt blending with organo-modified montmorillonite or in situ polymerization within sodium montmorillonite. The barrier properties were studied for water vapor and dichloromethane as an organic solvent. The sorption (S) and the zero concentration diffusion coefficient (D₀) were evaluated for both vapors. The water sorption increases with increasing the MMT content, particularly for the microcomposites containing the unmodified MMT-Na⁺. The thermodynamic diffusion parameters, D₀, were compared to the value of the parent PCL: both microcomposites and intercalated nanocomposites show diffusion parameters very near to PCL. At variance exfoliated nanocomposites show much lower values, even for small montmorillonite content. In the case of the organic vapor, the value of sorption at low relative pressure is mainly dominated by the amorphous fraction present in the samples, not showing any preferential adsorption on the inorganic component. At high relative pressure the isotherms showed an exponential increase of sorption, due to plasticization of the polyester matrix. The D₀ parameters were also compared to those of the unfilled PCL; in this case, both the exfoliated and the intercalated samples showed lower values, due to a more tortuous path for the penetrant molecules.