Potential of pulsed electric field to control Aspergillus parasiticus,aflatoxin and mutagenicity levels: Sesame seed quality

Seed processing technologies are essential for seed safety and functionality through protection of physicochemical quality, pathogen inactivation, aflatoxin detoxification and alleviation of mutagenicity. Design of a pilot-scale unit of pulsed electric fields (PEF) to treat sesame seeds with respect to quality parameters, Aspergillus parasiticus inactivation and aflatoxin reduction as well as alleviation of aflatoxin mutagenicity were prompted in this study. PEF energy ranged from 0.97 to 17.28 J achieved maximum reductions of peroxide value and acidity number of 67.4 and 85.7%, respectively, and did not change color L*, a*, b* and hue values. A 60% reduction of A. parasiticus counts occurred at the maximum PEF energy. Aflatoxins G1, G2, B1, and B2 contents decreased by 94.7, 92.7, 86.9, and 98.7%, respectively. Except for the samples treated by 2.16 J with 100 μg/plate and by 6.80 J with 10 μg/plate, PEF treatment provided elimination of aflatoxin mutagenity. It is concluded that PEF treatment can be used to treat sesame seeds with preservation of physicochemical properties, inactivation of A. parasiticus and decomposition of aflatoxins with reduced mutagenicity.     

Dynamic stability of a shaft system connected through a Hooke's joint

Dynamic stability of the torsional vibrations of a shaft system consisting of two torsionally elastic shafts interconnected through a Hooke's joint is investigated by means of a two degree-of-freedom model. The linearized equations of motion are shown to consist of a set of Mathieu-Hill equations and stability of their solutions is analyzed by means of a monodromy matrix method. Results are presented in the form of stability charts constructed on various parameter planes visualizing the effect of various selected pairs of system parameters on the stability.     

A novel fuzzy multi-criteria decision framework for sustainable supplier selection with incomplete information

Both academic and corporate interest in sustainable supply chains has increased in recent years. Supplier selection process is one of the key operational tasks for sustainable supply chain management. This paper examines the problem of identifying an effective model based on sustainability principles for supplier selection operations in supply chains. Due to its multi-criteria nature, the sustainable supplier evaluation process requires an appropriate multi-criteria analysis and solution approach. The approach should also consider that decision makers might face situations such as time pressure, lack of expertise in related issue, etc., during the evaluation process. The paper develops a novel approach based on fuzzy analytic network process within multi-person decision-making schema under incomplete preference relations. The method not only makes sufficient evaluations using the provided preference information, but also maintains the consistency level of the evaluations. Finally, the paper analyzes the sustainability of a number of suppliers in a real-life problem to demonstrate the validity of the proposed evaluation model.     

A novel hybrid MCDM approach based on fuzzy DEMATEL, fuzzy ANP and fuzzy TOPSIS to evaluate green suppliers

It is well known that “green” principles and strategies have become vital for companies as the public awareness increased against their environmental impacts. A company’s environmental performance is not only related to the company’s inner environmental efforts, but also it is affected by the suppliers’ environmental performance and image. For industries, environmentally responsible manufacturing, return flows, and related processes require green supply chain (GSC) and accompanying suppliers with environmental/green competencies. During recent years, how to determine suitable and green suppliers in the supply chain has become a key strategic consideration. Therefore this paper examines GSC management (GSCM) and GSCM capability dimensions to propose an evaluation framework for green suppliers. However, the nature of supplier selection is a complex multi-criteria problem including both quantitative and qualitative factors which may be in conflict and may also be uncertain. The identified components are integrated into a novel hybrid fuzzy multiple criteria decision making (MCDM) model combines the fuzzy Decision Making Trial and Evaluation Laboratory Model (DEMATEL), the Analytical Network Process (ANP), and Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) in a fuzzy context. A case study is proposed for green supplier evaluation in a specific company, namely Ford Otosan.     

Biosorption of Acid Red P-2BX by lichens as low-cost biosorbents

The aim of this study is to examine the dye biosorption properties of lichen species called Cladonia convoluta and Evernia prunastri. Since lichens are extensively found in the environment, their suitability as a cheap adsorbent has been investigated in this study. The optimal parameters for textile dye biosorption were also determined. The dried lichen biomass showed better dye biosorption capacity than ash lichen biomass. C. convoluta had better dye biosorption capacity than E. prunastri. Dye biosorption rate was found as 71.41% at optimal conditions. This study concluded that C. convoluta was a successful and cheap biosorbent for treatment of water contaminated by Acid Red P-2BX dye.     

The influence of nitrogen doping on reduced graphene oxide as highly cyclable Li-ion battery anode with enhanced performance

A straightforward, one-step route has been established to fabricate reduced- (rGO) and nitrogen-doped reduced graphene oxide (NrGO) with remarkable lithium-ion storage properties. The graphene oxide (GO) was synthesized as starting material by improved Hummers’ method. Thereafter, thermally annealing GO with NH₃ at elevated temperature to synthesize NrGO was yielded a more open structure with nitrogen sites suitable for enhanced Li intercalation. NrGO exhibited a reversible capacity of 240 mAhg^?1 at 10 Ag^-1 after 500 cycles with 90% capacity retention, which is the best result achieved among graphene oxide-based anodes at this current density. In contrast to rGO, NrGO cells exhibited a gradually increasing capacity profile, reaching up to 114% of the initial capacity at 0.1, 2, and 10 Ag^-1 current densities. Results showed that high occupancy of pyridinic N within NrGO enhanced battery performance and cell kinetics upon cycling which offers long-time operability at high current density.     

Friction and Wear Characteristics of Haynes 25, 188, and 214 Superalloys Against Hastelloy X up to 540 <Emphasis Type="Bold">°</Emphasis>C

As demand for more power increases, compression ratios, and operating temperatures keep rising. High speeds combined with high temperatures make turbomachinery sealing applications even more challenging. In order to confirm sufficient service life material pairs should be tested under conditions similar to engine operating conditions. This study presents high temperature friction and wear characteristics of cobalt/nickel superalloys, Haynes 25 (51Co–10Ni–20Cr–15W), Haynes 188 (39Co–22Ni–22Cr–14W), and Haynes 214 (75Ni–16Cr–3Fe–0.5Mn) sheets when rubbed against Hastelloy X (47Ni–22Cr–18Fe–9Mo) pins. Tests are conducted at 25, 200, 400, and 540 °C with a validated custom design linear reciprocating tribometer. Sliding speed and sliding distance are 1 Hz and 1.2 km, respectively. Friction coefficients are calculated with friction force data acquired from a load cell. Wear coefficients are calculated through weight loss measurements. Results indicate that Haynes 25 (H25) has the lowest friction coefficients at all test temperatures. Above 400 °C, H25 and Haynes 188 (H188) exhibit the best wear resistance. Protective cobalt oxide layers are formed on the H25 and H188 at 540 °C in addition to nickel, chrome, and tungsten oxides. Although, it has better oxidation resistance, Haynes 214 has relatively higher wear rates than other tested materials especially at low temperatures. However, its wear performance improves beyond 200 °C.     

Porous polyurethane film fabricated via the breath figure approach for sustained drug release

The breath figure (BF) method is an effective process for fabricating porous polymeric films. In this study, we fabricated porous polymer films from thermoplastic polyurethane (PU) through static BF with CHCl₃ as a solvent under 55–80% relative humidity. The porous PU films were prepared within various pore structures and sizes, which were adjustable, depending on the fabrication conditions. The humidity and exposure time were examined as variable parameters affecting the surface morphology, wettability, and cytotoxicity. Atorvastatin calcium, a hyperlipidemic agent, was loaded into the porous films during the casting process, and the drug-loading and drug-releasing behaviors of the porous PU membranes were evaluated. Approximately 60–80% of the drug was released in 14 days. The films exhibited sustained drug-release performances because of the hydrophobicity and nonbiodegradable nature of PU for perivascular drug administration. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47658.     

Screening,Molecular Cloning,and Biochemical Characterization of an Alcohol Dehydrogenase from Pichia pastoris Useful for the Kinetic Resolution of a Racemic β‐Hydroxy‐β‐trifluoromethyl Ketone

The stereoselective synthesis of chiral 1,3‐diols with the aid of biocatalysts is an attractive tool in organic chemistry. Besides the reduction of diketones, an alternative approach consists of the stereoselective reduction of β‐hydroxy ketones (aldols). Thus, we screened for an alcohol dehydrogenase (ADH) that would selectively reduce a β‐hydroxy‐β‐trifluoromethyl ketone. One potential starting material for this process is readily available by aldol addition of acetone to 2,2,2‐trifluoroacetophenone. Over 200 strains were screened, and only a few yeast strains showed stereoselective reduction activities. The enzyme responsible for the reduction of the β‐hydroxy‐β‐trifluoromethyl ketone was identified after purification and subsequent MALDI‐TOF mass spectrometric analysis. As a result, a new NADP⁺‐dependent ADH from Pichia pastoris (PPADH) was identified and confirmed to be capable of stereospecific and diastereoselective reduction of the β‐hydroxy‐β‐trifluoromethyl ketone to its corresponding 1,3‐diol. The gene encoding PPADH was cloned and heterologously expressed in Escherichia coli BL21(DE3). To determine the influence of an N‐ or C‐terminal His‐tag fusion, three different recombinant plasmids were constructed. Interestingly, the variant with the N‐terminal His‐tag showed the highest activity; consequently, this variant was purified and characterized. Kinetic parameters and the dependency of activity on pH and temperature were determined. PPADH shows a substrate preference for the reduction of linear and branched aliphatic aldehydes. Surprisingly, the enzyme shows no comparable activity towards ketones other than the β‐hydroxy‐β‐trifluoromethyl ketone.