Abnormal sensory nerve conduction in multifocal demyelinating neuropathy with persistent conduction block

Two patients exhibited chronic, slightly asymmetric weakness and wasting with fasciculations of the upper limb and hand muscles. Motor nerve conduction studies showed features of multifocal conduction block in nerve segments other than those usually involved in entrapment syndromes. The F wave was markedly delayed in the median and ulnar nerves. Transcranial cortical and cervical root magnetic stimulation showed bilaterally delayed thenar responses with normal central conduction time. Needle electromyography demonstrated a chronic denervation pattern with large polyphasic motor units in several muscles of the upper limbs. Sensory symptoms were mild and limited to paresthesias in the fingertips. Sensory nerve conduction velocity and sensory nerve action potential amplitudes were normal in elbow-to-wrist and wrist-to-finger segments of the median and ulnar nerves, but there was a delayed cortical response and unrecognizable Erb's point and cervical responses in the somatosensory evoked potentials to median nerve electrical stimulation. Electrophysiologic examination was normal in most nerves of the lower limbs. These two patients, meeting clinical and electrophysiologic criteria of multifocal neuropathy with conduction block, demonstrate that sensory fibers may also be involved in this syndrome.     

Effects of age on cardiovascular responses to adrenaline in man

Sensitivity to toxicants is a major criterion for selecting organisms for bioassay testing. If a sensitive species is also abundant and occupies a role as prey for many other species within a community, then the species become a valuable tool in environmental monitoring. These features apply to larval midge Chironomus petiolatus in freshwater environments of central Chile. The youngest larval instar is the most sensitive and presents the additional feature of lower survival within control arenas, making it more difficult to discern toxicant-related mortality from background mortality. In this work, we perform acute bioassays with the three larval stages of C. petiolatus and K2Cr2O7 as reference toxicant, with the goal of selecting a particular instar as the best bioassay tool using two criteria: sensitivity and background mortality. Sensitivity is evaluated through Monte Carlo estimation of LC50 and background mortality through bootstrap resampling, and a final Bioassay Performance Index as the product of LC50 and background mortality. For this task we developed a new computationally intensive statistical algorithm. Results show that the best bioassay tool is not the youngest and most sensitive instar but an intermediate one.     

Mapping a quantitative trait locus involved in melanotic encapsulation of foreign bodies in the malaria vector, Anopheles gambiae

A Plasmodium-refractory strain of Anopheles gambiae melanotically encapsulates many species of Plasmodium, whereas wild-type mosquitoes are usually susceptible. This encapsulation trait can also be observed by studying the response of refractory and susceptible strains to intrathoracically injected CM-Sephadex beads. We report the results of broad-scale quantitative trait locus (QTL) mapping of the encapsulation trait using the bead model system. Interval mapping using the method of maximum likelihood identified one major QTL, Pen1. The 13.7-cM interval containing Pen1 was defined by marker AGH157 at 8E and AGH46 at 7A on 2R. Pen1 was associated with a maximum LOD score of 9.0 and accounted for 44% of the phenotypic variance in the distribution of phenotypes in the backcross. To test if this QTL is important for encapsulation of Plasmodium berghei, F2 progeny were infected with P. berghei and evaluated for degree of parasite encapsulation. For each of the two markers that define the interval containing Pen1, a significant difference of encapsulation was seen in progeny with at least one refractory allele in contrast with homozygous susceptible progeny. These results suggest that Pen1 is important for melanotic encapsulation of Plasmodium as well as beads.     

A shared genetic mechanism for melanotic encapsulation of CM-Sephadex beads and a malaria parasite, Plasmodium cynomolgi B, in the mosquito, Anopheles gambiae

Dialysis dose and malnutrition have a great impact on the clinical out come of chronic hemodialysis patients. The interrelationships between them, however, remain undefined. Thus, we performed a study to determine the effects of increasing the dialysis dose on serum albumin concentrations and mortality in hemodialysis patients. We examined urea kinetic modeling, biochemical nutritional indices, comorbid conditions, patient survival time, and annual mortality rate. Dialysis dose, measured by Kt/V, significantly increased from 1.3 +/- 0.3 in 1987 to 1.5 +/- 0.4 in 1990 and to 1.7 +/- 0.4 in 1993. Serum albumin level also increased from 3.8 +/- 0.4 g/dL in 1987 to 4.0 +/- 0.4 in 1990 and to 1.7 +/- 0.4 in 1993. In 1993, 76% of patients had Kt/V > or = 1.50 compared with 45% in 1990 and 28% in 1987, whereas 82% of patients had a serum albumin level > or 4.0 g/dL in 1993 compared with 58% in 1990 and 29% in 1987. Protein catabolic rate and hematocrit also increased from 1987 to 1993, but not serum cholesterol or triglyceride. The annual mortality rate declined from 16.1% in 1987 to 13.2% in 1990 and to 8.0% in 1993. The decrease in mortality appeared to be unrelated to differences in patient selection or comorbid conditions. Serum albumin levels, hematocrit, Kt/V, and protein catabolic rate were significantly related to patient survival after age, sex, and diabetic status had been adjusted. Furthermore, there was a positive correlation between Kt/Vs and serum albumin concentration (r = 0.216, P < 0.001). Thus it appears that increasing the dose of dialysis improves serum albumin levels and perhaps survival rate in hemodialysis patients as well.     

Ultrastructural studies of the ileum neobladder

Of 101 women, 15-50 years of age, presenting with vaginal discharge, 34 had bacterial vaginosis and were randomly assigned to a seven-day course of oral treatment with either erythromycin (0.5 g b.i.d.) or metronidazole (0.4 g b.i.d.) in a single-blind, cross-over study. Treatment failure (> or = three clinical signs of bacterial vaginosis) occurred in 13 (81%) of 16 patients given erythromycin, as compared with three (17%) of 18 women treated with metronidazole (p < 0.001). Persistence of Gardnerella vaginalis, Mobiluncus species and/or Mycoplasma hominis was found in 14 of 16 patients treated with erythromycin, and in four of 16 patients treated with metronidazole. Treatment with metronidazole was successful (< or = two clinical signs of bacterial vaginosis) in eight of 10 cases of erythromycin treatment failure. Neither of two cases of metronidazole treatment failure was cured with erythromycin. At three-month follow-up of 31 women, persistence or recurrence of bacterial vaginosis was diagnosed in 11 cases (36%).     

Swoop: A Web Ontology Editing Browser

In this paper, we describe Swoop, a hypermedia inspired Ontology Browser and Editor based on OWL, the recently standardized Web-oriented ontology language. After discussing the design rationale and architecture of Swoop, we focus mainly on its features, using illustrative examples to highlight its use. We demonstrate that with its Web-metaphor, adherence to OWL recommendations and key unique features, such as Collaborative Annotation using Annotea, Swoop acts as a useful and efficient Web Ontology development tool. We conclude with a list of future plans for Swoop, that should further increase its overall appeal and accessibility.     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.