Influence of the ethylene–(methacrylic acid)–Zn2+ ionomer on the thermal and mechanical properties of blends of poly(propylene) (PP)/ethylene–(vinyl alcohol) copolymer (EVOH)

The thermal and mechanical properties and the morphologies of blends of poly(propylene) (PP) and an ethylene–(vinyl alcohol) copolymer (EVOH) and of blends of PP/EVOH/ethylene–(methacrylic acid)–Zn²⁺ ionomer were studied to establish the influence of the ionomer addition on the compatibilization of PP/EVOH blends and on their properties. The oxygen transmission rate (O₂TR) values of the blends were measured as well. PP and EVOH are initially incompatible as was determined by tensile tests and scanning electronic microscopy. Addition of the ionomer Zn²⁺ led to good compatibility and mechanical behaviour was improved in all blends. The mechanical properties on extruded films were studied for 90/10 and 80/20 w/w PP/EVOH blends compatibilized with 10 % of ionomer Zn²⁺. These experiments have shown that the tensile properties are better than in the injection‐moulded samples. The stretching during the extrusion improved the compatibility of the blends, diminishing the size of EVOH domains and enhancing their distribution in the PP matrix. As was to be expected, the EVOH improved the oxygen permeation of the films, even in compatibilized blends. Copyright © 2004 Society of Chemical Industry     

Preparation and characterization of proton‐exchange hybrid membranes

Two types of composite were prepared, based on a thermoplastic polymer, polyvinylidene fluoride (PVDF), and an elastomer, ethylene‐propylene‐diene terpolymer (EPDM), respectively. We obtained both series by addition of an inorganic proton‐conducting antimonic acid derivative (HSb) and polystyrene crosslinked with a small percentage of divinylbenzene (PS‐co‐DVB). From these composites, membranes were obtained and subjected to a heterogeneous‐phase sulfonation reaction with chlorosulfonic acid. All experimental materials were characterized from a morphological and electrical point of view, by means of techniques such as differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), non‐isothermal crystallization and complex impedance analysis. Copyright © 2005 Society of Chemical Industry     

Wetting behaviour of silicon nitride ceramics by Ti–Cu alloys

The wetting of Ti–Cu alloys on Si₃N₄ was analyzed by the sessile drop method, using an imaging system with a CCD camera during the heating under argon flow. The contact angle was measured as a function of temperature and time. The samples were cut transversally and characterized by scanning electron microscopy and energy dispersive spectrometry (SEM/EDS). Wettability of the Ti–Cu alloy on Si₃N₄ is influenced by the reaction between the Ti and the ceramic. The TC1 and TC2 alloys presented low final contact angle values around 2° and 26°, respectively, indicating good wetting on Si₃N₄.     

Manual dexterity of older Mexican American adults: a cross-sectional pilot experimental investigation

This paper reports results from an experimental pilot study performed to quantify the manual dexterity of older Mexican American adults. The Purdue pegboard test, a two-arm coordination test, and a hand-tool dexterity test were used in this study. To enable cross-sectional comparisons of manual dexterity measures of older Mexican American adults with young Mexican American adults, these tests were administered to 18 older Mexican American adults aged 63–85 (mean age: 71.3 years, SD: 7.0 years), recruited from senior recreation centers in El Paso, and eighteen young adults aged 21–32 (mean age: 25.6 years, SD: 3.8 years) recruited from the student body at the University of Texas at El Paso. For the Purdue pegboard test, the number of pegs placed in 30 s using the preferred hand, the non-preferred hand, and both hands were first individually monitored. Then, scores on an assembly task using the Purdue pegboard were obtained. For the two-arm coordination test, participants were required to trace a star pattern with a stylus using both hands. The time for task completion and the number of errors made during task performance were monitored. For the hand-tool dexterity test, participants were required to use common hand tools and remove nuts and bolts from one side of a wooden upright, and to assemble nuts and bolts in the corresponding holes on the other side of the upright. The time taken for task completion was recorded. Since modified Levene's test showed equality of variances, two sample t-tests, comparing the mean responses of older adults with the mean responses of young adults for each individual test, were conducted. Results indicate that responses for the older adults were statistically significant different (p<0.001) from young adults for all Purdue pegboard tasks. On the average, older adults performed significantly slower (p<0.001) than young adults on the two-arm coordination test, and committed more errors before task completion (p<0.05). Older adults also took longer to complete the hand-tool dexterity task compared to their younger counterparts (p<0.05). In addition to the t-tests, manual dexterity performance measures from older adults were regressed with age to determine the cross-sectional age effects on manual dexterity measures. Results indicate that all Purdue pegboard performance measures were significantly affected by age (p<0.05). The time to complete the two-arm coordination test was significantly linearly related to age (p<0.05). However, the number of errors committed by older adults in the performance of the two-arm coordination test was not significantly linearly related to age. Time to complete the hand-tool dexterity was also significantly linearly related to age (p<0.05). Accommodating age-related changes in manual dexterity is important for job design in industry, especially in industries employing older adults requiring significant assembly and hand-tool use.

Relevance to industry

Given the aging of the industrial workforce, it is important to understand how manual dexterity is affected by age, so that jobs requiring significant manual dexterity for task initiation, task performance and task completion are designed to fit older adult dexterity levels.     

Synthesis and characterization of functional gradient copolymers of glycidyl methacrylate and butyl acrylate

Epoxy-functional spontaneous gradient copolymers of glycidyl methacrylate (G) and n-butyl acrylate (B) were synthesized via atom transfer radical polymerization (ATRP). The copolymerization reactions were carried out in toluene solution at 70 °C, using methyl 2-bromopropionate (MBrP) as initiator and copper chloride with N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as the catalyst system. The kinetic behaviour of the statistical copolymerizations was studied in a wide composition interval with molar fractions of G ranging from 0.10 to 0.75. The synthesized copolymers were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. ¹H NMR was employed to determine the copolymer composition, demonstrating the gradient character of the copolymers along the main chain in the whole monomer conversion interval. Apart from this, the sequence distribution and stereoregularity were analyzed. These microstructural experimental data agreed well with those calculated from Mayo-Lewis terminal model (MLTM) and a Bernoullian statistic with an isotacticity parameter of σ_G = 0.28 and a coisotacticity parameter of σ = 0.30.     

Interlaboratory ring test of time-resolved fluoroimmunoassays for zeranol and alpha-zearalenol and comparison with zeranol test kits.

Many zeranol immunoassay test kits cross-react with toxins formed by naturally occurring Fusarium spp. fungi, leading to false-positive screening results. This paper describes the evaluation and application of recently published, dry reagent time-resolved fluoroimmunoassays (TR-FIA) for zeranol and the toxin alpha-zearalenol. A ring test of bovine urine fortified with zeranol and/or alpha-zearalenol in four European Union National Reference Laboratories demonstrated that the TR-FIA tests were accurate and robust. The alpha-zearalenol TR-FIA satisfactorily quantified alpha-zearalenol in urine fortified at 10-30 ng ml(-1). The specificity-enhanced zeranol TR-FIA accurately quantified zeranol in the range 2-5 ng ml(-1) and gave no false-positive results in blank urine, even in the presence of 30 ng ml(-1) alpha-zearalenol. Zeranol TR-FIA specificity was demonstrated further by analysing incurred zeranol-free urine samples containing natural Fusarium spp. toxins. The TR-FIA yielded no false-positive results in the presence of up to 22 ng ml(-1) toxins. The performance of four commercially available zeranol immunoassay test kits was more variable. Three kits produced many false-positive results. One kit produced only one potential false-positive using a protocol that was longer than that of the TR-FIA. These TR-FIAs will be valuable tools to develop inspection criteria to distinguish illegal zeranol abuse from contamination arising from in vivo metabolism of Fusarium spp. toxins.     

Evaluation of Textile Bobbins Drying Processes: Experimental and Modelling Studies

Drying of textile bobbins was carried out on two kinds of laboratory-scale dryers: in a cross circulation drying rig, atmospheric pressure heating air is used, while in the through circulation drying apparatus, the heating air is pressurized before the drying process takes place. In both cases, a bobbin was fitted with seven thermocouples, placed in a plane normal to the bobbin axis but at different radial distances, in order to provide temperature data during the drying process. In cross circulation drying, plots of temperature against time indicated the presence of two moving fronts, one starting from inside the bobbin, another from the outside, while in through circulation drying, similar plots showed the presence of an evaporation front, moving from inside the bobbin to the outside. In both canes, numerical models were developed to simulate the drying processes.     

Integrating scheduling and control functions in computer integrated manufacturing using artificial intelligence

Proper integration of scheduling and control in Flexible Manufacturing Systems will make available the required level of decision-making capacity to provide a flexibly-automated, efficient, and quality manufacturing process. To achieve this level of integration, the developments in computer technology and sophisticated techniques of artificial intelligence (AI) should be applied to such FMS functions as scheduling. In this paper, we present an Intelligent Scheduling System for FMS under development that makes use of the integration of two AI technologies. These two AI technologies — Neural Networks and Expert Systems — provide the intelligence that the scheduling function requires in order to generate goodschedules within the restrictions imposed by real-time problems. Because the system has the ability to plan ahead and learn, it has a higher probability of success than conventional approaches. The adaptive behavior that will be achieved contribute to the integration of scheduling and control in FMS.     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

Computationally efficient methods for bit-error rate evaluation inweakly coherent optical systems

A semianalytical method to estimate the bit-error rate performance of nonsynchronous ASK and FSK optical heterodyne systems is presented. This approach takes into account numerous system details with an accuracy similar to Monte-Carlo simulation, but with a computation time reduced by several orders of magnitude. An analytical approximation, based on a closed-form expression for the decision variable moment generating function, is also presented. The results obtained with the semianalytical method and the analytical approximation are compared to Monte-Carlo simulation results and to measurements obtained on a practical FSK system