Sequential tripping strategy for a transmission network back-upprotection expert system

This paper describes a sequential tripping strategy used in a wide area back-up protection expert system (BPES) to combat situations in which protection relays have maloperated or information is missing. The BPES is an innovative back-up protection scheme designed to prevent the occurrence of widespread blackouts. The BPES evaluates the certainty that transmission lines are likely to be affected by the fault and uses a sequential tripping strategy to isolate the fault if a firm decision is not available due to maloperated relays and/or missing information. The mode of analysis and the sequential tripping strategy ensures that the BPES will clear a fault at minimum risk to the network. An example is included to demonstrate how the certainty factor based sequential tripping strategy is employed by the BPES to clear a fault which occurred on the South Western part of the UK National Grid System     

Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

Effective modelling of percolation at the landscape scale using data-based approaches

Process-based models have been extensively applied to assess the impact of landuse change on water quantity and quality at landscape scales. However, the routine application of those models suffers from large computational efforts, lack of transparency and the requirement of many input parameters. Data-based models such as Feed-Forward Multilayer Perceptrons (MLP) and Classification and Regression Trees (CART) may be used as effective models, i.e. simple approximations of complex process-based models. These data-based approaches can subsequently be applied for scenario analysis and as a transparent management tool provided climatic boundary conditions and the basic model assumptions of the process-based models do not change dramatically. In this study, we apply MLP, CART and Multiple Linear Regression (LR) to model the spatially distributed and spatially aggregated percolation in soils using weather, groundwater and soil data. The percolation data is obtained via numerical experiments with Hydrus1D. Thus, the complex process-based model is approximated using simpler data-based approaches. The MLP model explains most of the percolation variance in time and space without using any soil information. This reflects the effective dimensionality of the process-based model and suggests that percolation in the study area may be modelled much simpler than using Hydrus1D. The CART model shows that soil properties play a negligible role for percolation under wet climatic conditions. However, they become more important if the conditions turn drier. The LR method does not yield satisfactory predictions for the spatially distributed percolation however the spatially aggregated percolation is well approximated. This may indicate that the soils behave simpler (i.e. more linear) when percolation dynamics are upscaled.     

Plastic deformation and fracture of binary TiAl-base alloys

The mechanical behavior of binary TiAl alloys containing 46 to 60 at. pct Al has been studied in bulk materials preparedvia rapid solidification processing. Bending and tensile tests were carried out at room temperature as a function of Al concentration. A few alloys were also tested from liquid nitrogen temperature to ∼ 1000°C. Deformation substructures were studied by analytical transmission electron microscopy and fracture modes by scanning electron microscopy (SEM). It was found that both microstructure and composition strongly affect the mechanical behavior of TiAl-base alloys. A duplex structure, which contains both primary y grains and transformedγ/α ₂ lamellar grains, is more deformable than a single-phase or a fully transformed structure. The highest plasticities are observed in duplex alloys containing 48–50 at. pct Al after heat treatment in the center of theγ + α phase field. The deformation of these duplex alloys is facilitated by 1/2[110] slip and {111} twinning, but very limited superdislocation slip occurs. The twin deformation is suggested to result from a lowered stacking fault energy due to oxygen depletion or an intrinsic change in chemical bonding. Other factors, such as grain size and grain boundary chemistry and structure, are important from a fracture point of view. The results on the deformation and fracture modes as a function of test temperature are also discussed.     

Thermal Evaluation of Scorched Graphite-Epoxy Panels by Infrared Scanning

A simple measurement system is described for evaluating damage to graphite-epoxy panels, such as those used in high-performance aircraft. The system uses a heating laser and infrared imaging system to measure thermal performance. Thermal conductivity or diffusivity is a sensitive indicator of damage in materials, allowing this thermal measurement to show various degrees of damage in graphite-epoxy composites. Our measurements track well with heat-flux damage to graphite epoxy panels. This measurement system, including analysis software, could easily be used in the field, such as on the deck of an aircraft carrier or at remote air strips.     

A methodology for assessing gamebird use of short rotation coppice

Gamebirds provide a considerable incentive to plant and manage new woodlands. The supplementary income thus generated can improve their overall value. Other studies suggest that Short Rotation Coppice (SRC) crops may provide an attractive habitat for some gamebird species and could increase the value of the crop. To investigate this, the use by pheasants and partridge of different types of SRC at one site was assessed.

A method using sand quadrats to record gamebird footprints and hence relative use was developed. Pheasant footprints were recorded more frequently in the quadrats alongside the willow coppice, whereas partridge footprints occurred more frequently alongside the poplar coppice. Footprint analysis offers a reliable method of investigating how gamebirds use different types of SRC within small areas. The results are considered in terms of the placement of short rotation coppice plantations in the landscape to improve their ecological design.     

Encoded moire inspection based on a computer solid model

An investigation into a system linking a computer solid modeler to an active stereo imaging inspection station is presented. Given the computer solid model of a surface, a projected pattern can be encoded so that the reflections from the object's surface exhibit a uniformly simple pattern when the object's surface and the modeled surface are identical. Research concerning the method of generating projection patterns, as well as the sensitivity of the system, is discussed. A prototype system consisting of a computer graphics workstation; a flexible projector, and a machine vision system was used to inspect two different manufactured parts     

IEA joint trials: New lessons from old plantations

Two international trials of potential biomass species families and clones planted in 1985 have been analyzed to determine changing patterns in growth, diseases, and insects. In the Swedish trial, with close spacing and short rotations, Salix viminalis clones gave the best average yield of 17.4 Mg/Ha/yr on the first coppice rotation. In the Minnesota, USA trial, with wider spacings and a longer rotation Populus alba hybrid clones gave the best average yields of 5.5 Mg/Ha/yr. The most important disease and insect problems encountered were Septoria musiva stem cankers on some Populus clones; frost die back in some Salix clones; and the leaf blotch miner, Fenusa dohrnii, on most Alnus families. Recommendations for future international cooperation in field trials are presented.     

An analysis of the coupling of an injection laser diode to a planar LiNbO3waveguide

Calculated butt coupling efficiency between a GaAlAs double heterostructure laser and a single-mode LiNbO3Ti-diffused optical waveguide is presented in this paper as a function of the transverse displacement, the angular alignment, the longitudinal separation between the laser and the waveguide end surfaces, the radiation field of the laser diode and its dependence on the laser diode structure, and the mode profile of the waveguide and its dependence on experimental diffusion parameters. The maximum efficiency is less than 40 percent because of the mismatch between the waveguide mode and the laser radiation, caused primarily by the experimental limitations in their structures. The effect of the reflection of the waveguide end surface on the laser oscillation has also been estimated.