Acidity and basicity of hydrotalcite derived mixed Mg-Al oxides studied by test reaction of MBOH conversion and temperature programmed desorption of NH3 and CO2

Mg-Al hydrotalcites intercalated with five different interlayer anions—CO₃²⁻, SO₄²⁻, Cl⁻, HPO₄²⁻ or terephthalate—were synthesized by either the coprecipitation or ion-exchange method. The structure of the as-synthesized samples and the presence of intended anions in the interlayer gallery of hydrotalcites were determined by X-ray diffraction and FTIR spectroscopy. On calcination at 600 °C the materials were transformed into mixed metal oxides. The kind of the counterbalancing anions present in the parent hydrotalcite influences strongly textural parameters of the obtained Mg-Al oxides. Both temperature-programmed desorption of NH₃ and CO₂, and test reaction of 2-methyl-3-butyn-2-ol (MBOH) conversion were used to determine the acidity and basicity of the samples. The hydrotalcite derived mixed Mg-Al oxides showed the presence of Brønsted and Lewis acid and base sites. However, the strong basic character of the solids caused that acetone and acetylene were observed as the major products of MBOH conversion.     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007     

Enhancing power transfer capability through flexible AC transmission system devices:a review

Global demand for power has significantly increased, but power generation and transmission capacities have not increased proportionally with this demand. As a result, power consumers suffer from variou...     

Discussion A note on ‘Similarity of a new greedy heuristic for facility layout by graph theory to an existing approach’

A recent paper by Boswell claims the development of a new greedy heuristic for constructing a maximal planar weighted graph. This paper points out that Boswell's procedure is not actually new since it has similiarity to an approach introduced earlier by Hassan and Hogg. The paper also points out the advantages of the Hassan and Hogg approach over Boswell's procedure.     

Forest recreation planning in Langkawi Island,Malaysia, using Landsat TM

There is an increasing demand for development of new recreation areas and more intensive management of existing areas. With an eye to the design and implementation of comprehensive zoning plans, satellite remote sensing should provide an ideal tool for terrain analysis, vegetation, and cover type mapping, which are vital to intensive recreation planning. The study undertaken was aimed at examining the applicability of satellite remote sensing for providing necessary information to be used in forest recreation planning. A Landsat TM scene (path row 128/ 56) taken on 30 January 1992 was processed digitally on a Meridian PC image processing system by selecting a representative subsection of the scene that covered the study area. Existing land use, topographical maps, and other related ground information as well as contrast stretching and a maximum likelihood classifier ( MLC) technique were used to assist in the classification. The selection of potential recreation sites was based from potential surface analysis ( PSA ). The results showed that most of the undeveloped forest area located in the north-eastern part of Langkawi Island, Malaysia, was the most potential sites for recreational development, while the moderate recreation potential zones lay on the western part of the island. The mean overall classification accuracy obtained was 82% Therefore the study implies that it is possible to select potential recreation sites ranging from most potential to least potential in Langkawi Island using Landsat TM.     

Optimum synthesis conditions of nanometric Fe50Ni50 alloy formed by chemical reduction in aqueous solution

In the present article, various nanometric Fe₅₀Ni₅₀ alloys were synthesized by chemical reduction of the corresponding metal ions, with hydrazine in an aqueous solution. Process variables of reaction temperature, pH of the hydrazine solution and concentration of metal ions were varied in order to determine the optimum synthesis conditions regarding quality, productivity and cost. It is found that pH of hydrazine solution, at low concentration of metal ions, is the most crucial variable affecting the reaction rate, average crystallite and particle sizes of the synthesized nanometric Fe₅₀Ni₅₀ alloy, followed by the total concentration of metal ions. Thus, increase of pH of hydrazine solution acts as an efficient stabilizer in reducing the particle size. On the contrary, at high concentration of metal ions, the structural characteristics of the nanometric Fe₅₀Ni₅₀ alloy are almost insensitive to reaction temperature and pH of hydrazine solution, but the reduction rate is remarkably sensitive to reaction temperature. Based on these results, it is decided that a reaction temperature of 80 °C, pH of the hydrazine solution of 12·5 and concentration of metal ions of 0·6 M represent the optimum synthesis conditions. The role of pH of hydrazine solution in reducing the alloy’s average particle size as well as efficient stabilizer confirms tremendous effect of synthesis conditions on the alloy structure and therefore, the importance of this study for industrial production of nanometric Fe₅₀Ni₅₀ alloy.     

CONTROL OF CONSTRUCTION ACTIVITIES: III. FUZZY-BASED CONTROLLER

In this paper, a real-time fuzzy-based controller of construction activities is proposed. Because of the numerous uncertainties associated with construction activities, their control requires a different approach than the traditional feedback methods. These methods are essentially based on the knowledge of a transfer function that models the input/output relationships for the controlled system. For a highly complex and uncertain system such as a construction activity, a fuzzy-based control strategy was found to be a suitable and effective approach. The proposed control system is built in two main levels, the process and the activity levels. Each level comprises two main units, namely, the fuzzy controller and the self learning algorithm. The implementation of the control actions can be performed by either manipulating the states of the variables for the purpose of improving the process output, or changing the process behavior function for the same purpose. Practical examples are presented wherever possible to illustrate the proposed control strategy.     

CONTAMINATION OF PATULIN IN CLEAR APPLE JUICE IN MASHHAD, IRAN

Patulin is a frequent contaminant of moldy and rotten apples and apple products. The aim of this study was to evaluate patulin contamination in 58 apple juices collected from a retail market in Mashhad during winter and spring of 2006.
Samples were assayed for patulin by high-performance liquid chromatography. Fifty-four samples were positive for patulin at levels that ranged from 10.5 to 121.8 µg/L, and six samples had patulin levels higher than 50 µg/L. The overall mean of patulin concentration was 29.2  ±  19.5 µg/L. Forty-eight samples had patulin concentration between 5 and 50 µg/L. Although the mean concentration of patulin samples was lower than Iranian maximum tolerated level of 50 µg/L, contamination of 10% of the samples at levels higher than 50 µg/L indicated the need for improving production techniques by the industry.

PRACTICAL APPLICATIONS

Studies have shown that the concentration of patulin may exceed the determined limits in apple juice and in other fruit products. Its presence can be a potential threat to the health of consumers, particularly children. The results may help us in understanding what should be the level of patulin in apple juice. The awareness of the apple industry of patulin contamination in fruit and the implementation of improved techniques for the production of apple products with reduced patulin concentrations have contributed to the quality of apple juice that are available on the Iranian market.     

EFFECT OF ADDING A PASSIVE CONDENSER ON SOLAR STILL PERFORMANCE

A theoretical and experimental study was carried out to investigate the effect of adding a passive condenser on the performance of the single slope, basin type solar still. A theoretical model based on Dunkle [1] mass transfer (evaporation) rate was developed. The model assumes that the transfer of water vapour from the still to the condenser is due to one or more of the following mass transfer modes; (i) diffusion, (ii) purging and (iii) natural circulation. The theoretical results indicate that diffusion contribution is relatively small. The contribution through purging represents the fraction [V(cond)/(V(cond) + V(s))] of the still yield, while it represents 75% of the still yield through natural circulation. An experimental study that simulates the purging mass transfer mode was investigated. The experimental results show good agreement with the theoretical predictions and an increase of 45% in solar still efficiency was obtained.