Effect of marangoni stresses on the deformation and coalescence in compatibilized immiscible polymer blends

The effect of physical compatibilization on the deformation and coalescence of droplets in immiscible polymer blends is discussed. Evidence is provided for the existence of concentration gradients in block copolymers along the interface during deformation. This causes complex changes in droplet shapes during deformation and relaxation. These concentration gradients also result in Marangoni stresses, which stabilize the droplets against deformation and breakup. Coalescence experiments have been performed, varying both the compatibilizer concentration and the shear rate. Existing coalescence models have been evaluated. An empirical extension of Chesters' partially mobile interface model is presented, that treats the effects of Marangoni stresses on the coalescence process as a higher effective viscosity ratio.     

Smoke suppressants for plasticized poly(vinyl chloride)

Addition of plasticizers to poly(vinyl chloride) generally increases its flammability and frequently increases smoke production during its burning. Flame retardants added to plasticized PVC can reduce flammability, but increase smoke production. This study shows that proper choice of combined use of other polymers, phosphate plasticizers, fillers and other flame retardants, produces measured synergistic improvements in flame retardance and smoke suppression which could benefit applications such as PVC wire and cable insulation.     

Scalable approach to uncertainty quantification and robust design of interconnected dynamical systems

Development of robust dynamical systems and networks such as autonomous aircraft systems capable of accomplishing complex missions faces challenges due to the dynamically evolving uncertainties coming from model uncertainties, necessity to operate in a hostile cluttered urban environment, and the distributed and dynamic nature of the communication and computation resources. Model-based robust design is difficult because of the complexity of the hybrid dynamic models including continuous vehicle dynamics, the discrete models of computations and communications, and the size of the problem. We will overview recent advances in methodology and tools to model, analyze, and design robust autonomous aerospace systems operating in uncertain environment, with stress on efficient uncertainty quantification and robust design using the case studies of the mission including model-based target tracking and search, and trajectory planning in uncertain urban environment. To show that the methodology is generally applicable to uncertain dynamical systems, we will also show examples of application of the new methods to efficient uncertainty quantification of energy usage in buildings, and stability assessment of interconnected power networks.     

Renewable elastomers based on blends of maleated polypropylene and plasticized starch

Most recent developments in polymers from renewable resources have focused on thermoplastics, whereas there has been no comparable development of plastics with elastomeric properties. Here we evaluate the possibility of developing renewable elastomers based on starch. Potato starch plasticized with glycerol (called plasticized starch, or PLS) was melt‐blended with small quantities (5 wt % or 15 wt%) of maleated polypropylene (MAPP). The maleic anhydride groups of the polypropylene are expected to react with the hydroxy groups of starch under melt blending conditions. The resulting blends of MAPP and PLS were characterized by mechanical testing, SEM, DMA, and DSC. SEM, solubility and adhesion tests indicate that the blends are two‐phase materials, in which the continuous phase PLS is physically crosslinked by polypropylene domains. The materials showed rubbery properties as judged by a low glass transition temperature (～?50°C independent of polypropylene content), and a wide rubbery plateau in DMA experiments that extended from room temperature to as high as 170°C. The tensile properties are also characteristic of elastomers. However, slow aging due to starch crystallization, and extraction of glycerol upon water exposure remain two challenges that must be overcome before the materials can be used as practical elastomers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Optimizing PSMA Radioligand Therapy for Patients with Metastatic Castration-Resistant Prostate Cancer. A Systematic Review and Meta-Analysis

The aim of the review was to evaluate patient and treatment characteristics for patients with metastatic castration-resistant prostate cancer (mCRPC) treated with PSMA radioligand therapy (PRLT) associated with above-average outcome. The systematic review and meta-analysis followed recommendations by the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA). We searched for publications in PubMed, Embase, and ClinicalTrials.gov up to 31 September 2020. Thirty-six publications and four duplicates reported 2346 patients. Nearly two-thirds of the patients had bone metastases. Median overall survival (OS) was 16 months. Asymptomatic patients and patients with only lymph node metastases lived longer than symptomatic patients and patients with more extensive metastases. Patients treated with an intensified schedule of ¹⁷⁷Lu PRLT lived longer than those treated with a conventional schedule. Half of the patients obtained a PSA decline ≥ 50% and these patients lived longer than those with less PSA decline. Approximately 10% of the patients developed hematologic toxicity with anemia grade 3 as the most severe adverse effect. Characteristics for patients, cancer, restaging, and PRLT predict above average overall survival following treatment with PRLT.     

Effect of Conjugate Heat Transfer on Entropy Generation in Slip-Driven Microflow of Power Law Fluids

We analyze the entropy generation characteristics in a non-Newtonian microflow under the influence of interfacial slip as modulated by the conjugate transport of heat. We consider power law model to represent the constitutive behavior of the non-Newtonian fluid. In this analysis, we analytically solve the transport equations employing the thermal boundary condition of the third kind at the exterior wall surface accounting for the effect of conjugate heat transfer. We demonstrate that the slip flow–driven alteration in convective transport of heat and its nonlinear interaction with viscous dissipation, as modulated by fluid rheology and conjugate transport of heat, gives rise to a minimum entropy generation rate of the system. We determine the optimum value of the geometrical parameter—that is, the channel wall thickness and the thermophysical parameters, such as the Biot number and Peclet number—leading to a minimum entropy generation rate in the system. The results of this analysis could be of helpful in designing microsystems/devices typically used for electronic cooling, micro-heat pipes, and micro-heat exchangers.     

An Indian test facility to characterise diagnostic neutral beam for ITER

The diagnostic neutral beam (DNB) line shall be used to diagnose the He ash content in the D–T phase of the ITER machine using the charge exchange recombination spectroscopy (CXRS). Implementation of a successful DNB at ITER requires several challenges related to the production, neutralization and transport of the neutral beam over path lengths of 20.665 m, to be overcome. The delivery is aided if the above effects are tested prior to onsite commissioning. As DNB is a procurement package for INDIA, an ITER approved Indian test facility, INTF, is under construction at Institute for Plasma Research (IPR), India and is envisaged to be operational in 2015. The timeline for this facility is synchronized with the RADI, ELISE (IPP, Garching), SPIDER (RFX, Padova) in a manner that best utilization of configurational inputs available from them are incorporated in the design. This paper describes the facility in detail and discusses the experiments planned to optimise the beam transmission and testing of the beam line components using various diagnostics.     

An analytical model to predict specific shear energy in high-speed turning of Inconel 718

Machining of Inconel 718 at higher cutting speeds is expected to provide some relief from the machining difficulties. Therefore, to understand the material behavior at higher cutting speeds, this paper presents an analytical model that predicts specific shearing energy of the work material in shear zone. It considers formation of shear bands that occur at higher cutting speeds during machining, along with the elaborate evaluation of the effect of strain, strain rate, and temperature dependence of the shear flow stress using Johnson–Cook equation. The model also considers the ‘size-effect’ in machining in terms of occurrence of ‘ploughing forces’ during machining. The theoretical results show that the shear band spacing in chip formation increases linearly with an increase in the feedrate and is of the order of 0.2–0.9 mm depending upon the processing conditions. The model shows excellent agreement with the experimental values with an error between 0.5% and 7% for various parametric conditions.     

碳纳米管阵列/热解炭复合材料的制备和表征（英文）

以甲烷为碳源,通过化学气相沉积和化学蒸汽渗透两步法将热解炭填充至碳纳米管阵列间的空隙而制备出碳纳米管阵列/热解炭复合材料。采用扫描电镜和拉曼光谱仪对样品的结构进行表征。结果表明,碳纳米管被热解炭填充和覆盖形成均相的复合膜,其密度增加4倍,同时热解炭已石墨化。