Microstructure,wear and corrosion characteristics of multiple-reinforced (SiC–B4C–Al2O3) Al matrix composites produced by liquid metal infiltration

In this study, AA7075 aluminum matrix composites reinforced with the combination of SiC, Al₂O₃, and B₄C particles were fabricated by the liquid metal infiltration method. The effects of the relative ratio of B₄C and Al₂O₃ particles on the microstructural, wear, and corrosion features of the composite samples were analyzed using XRD, light metal microscopy, SEM, EDS, Brinell hardness, ball-on-disc type tribometer, and potentiodynamic polarization devices. It was determined that infiltration occurred more successfully, and homogenously distributed particles with reduced porosity were obtained as the amount of Al₂O₃ increased. Worn surface studies revealed that the specimens were predominantly worn by abrasion and adhesion. The increase in B₄C/Al₂O₃ ratio caused a decrease in the hardness and wear strength, whereas it increased the corrosion resistance.     

The design of multiple feedback topology Chebyshev low-pass active filter with average differential evolution algorithm

Neural Computing and Applications - This study presents the design of a tenth-order multiple feedback Chebyshev low-pass filter (MF-C-LPF). Component selection and gain calculation of filters are...     

Masking the Peroxidase-Like Activity of the Molybdenum Disulfide Nanozyme Enables Label-Free Lipase Detection

Two-dimensional MoS₂ nanoparticles (2D-nps) exhibit artificial enzyme properties that can be regulated at bio-nanointerfaces. We discovered that protein lipase is able to tune the peroxidase-like activity of MoS₂ 2D-nps, offering low-nanomolar, label-free detection and identification in samples with unknown identity. The inhibition of the peroxidase-like activity of the MoS₂ 2D-nps was demonstrated to be concentration dependent, and as low as 5 nm lipase was detected with this approach. The results were compared with those obtained with several other proteins that did not display any significant interference with the nanozyme behavior of the MoS₂ 2D-nps. This unique response of lipase was characterized and exploited for the successful identification of lipase in six unknown samples by using qualitative visual inspection and a quantitative statistical analysis method. The developed methodology in this approach is noteworthy for many aspects; MoS₂ 2D-nps are neither labeled with a signaling moiety nor modified with any ligands for signal readout. Only the intrinsic nanozyme activity of the MoS₂ 2D-nps is exploited for this detection approach. No analytical equipment is necessary for the visual detection of lipase. The synthesis of the water-soluble MoS₂ 2D-nps is low costing and can be performed in bulk scale. Exploring the properties of 2D-nps and their interactions with biological materials reveals highly interesting yet instrumental features that offer the development of novel bioanalytical approaches.     

A Code Assignment Algorithm for Nonblocking OVSF Codes in WCDMA

OVSF codes are used as channelization codes in WCDMA. Due to code blocking property of OVSF codes, the bandwidth available in the system is severely limited. Code reassignments mitigate the impact of the blocking property at the expense of causing delays and decreasing the throughput of the system. Nonblocking OVSF (NOVSF) codes have been proposed to alleviate the adverse effect of code reassignments. This paper presents a code assignment algorithm for NOVSF codes, which does not require any code reassignments. Simulation results show that NOVSF codes achieve better throughput than OVSF codes, even though code reassignments are allowed in the assignments of OVSF codes.     

Novel T-rail electrodes for substrate removed low-voltage high-speed GaAs/AlGaAs electrooptic modulators

A novel traveling-wave electrode utilizing capacitively loaded T-rail elements was developed for low-voltage high-speed substrate-removed GaAs/AlGaAs electrooptic modulators. Electrodes with varying dimensions were fabricated and characterized. Electrode phase velocity, characteristic impedance, loss coefficient, and capacitive loading were extracted from the measured s-parameters up to 40 GHz. Electrode was also simulated using a finite-element solver. The measured and calculated electrode capacitance values were found to be in excellent agreement, showing that the electrode can be precisely designed. Approaches were outlined to provide a group velocity-matched very high-speed modulator electrode suitable for a low drive-voltage substrate-removed GaAs/AlGaAs electro-optic modulator     

Autocorrelation model-based identification method for ARMA systems in noise

A novel method for parameter estimation of minimum-phase autoregressive moving average (ARMA) systems in noise is presented. The ARMA parameters are estimated using a damped sinusoidal model representation of the autocorrelation function of the noise-free ARMA signal. The AR parameters are obtained directly from the estimates of the damped sinusoidal model parameters with guaranteed stability. The MA parameters are estimated using a correlation matching technique. Simulation results show that the proposed method can estimate the ARMA parameters with better accuracy as compared to other reported methods, in particular for low SNRs.     

Comparison of copper emission rates from wood treated with different preservatives to the environment

This study describes a laboratory method for the estimation of emission from preservative-treated wood in the different situations where emissions could enter the environment for use classes 3 (not in contact with ground) and 4 and 5 (in contact with the ground, fresh water or sea water) according to OECD Guidelines. Samples of scotch pine sapwood (Pinus sylvestris L.) were treated with CCA (1% and 2%), ACQ-1900 (3% and 7%), ACQ-2200 (2%), Tanalith E 3491 (2% and 2.8%), and Wolmanit CX-8 (2%).