Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Colour and COD removal from textile effluent by coagulation and advanced oxidation processes

The aim of this study was to compare the performance of coagulation, Fenton's oxidation (Fe²⁺/H₂O₂) and ozonation for the removal of chemical oxygen demand (COD) and colour from biologically pretreated textile wastewater. FeSO₄ and FeCl₃ were used as coagulants at varying doses and varying colour removal efficiency was measured. For the Fenton process, COD and colour removal efficiencies were found to be 78% and 95% for the Fenton process, and to be 64% and 71% for the Fenton-like process (Fe³⁺/H₂O₂), respectively. Ozonation experiments were conducted at different initial pH values and fixed ozone doses. Ozonation resulted in 43% COD and 97% colour removal whereas these rates increased to 54% and 99% when 5 mg/l hydrogen peroxide was added to the wastewater before ozonation at the same dose. The operating costs of all proposed treatment systems were also evaluated in this study.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain size

Being crystalline materials, brittleness may be an important issue for granitic rocks, especially when they are subject to certain loading conditions. Therefore, in practice, more specifically in their usage as a natural building stone, there is a need for their brittleness characterization. This paper reports a study carried out on some selected granitic rock types in order to determine their relative brittleness index values and relate it to their mineral grain size. For this purpose, three different types of granitic rocks similar in mineral composition, but diverse in grain sizes were selected for the execution of the study. The relative brittleness index values of the studied rock types were determined from the size effect method by using the point load test apparatus. Based on the results of this investigation it is was concluded that, rather than the proportions of the rock forming minerals such as quartz and feldspars, the grain size of feldspars could be the dominant parameter affecting relative brittleness values of the tested rocks.     

Effect of Boron and Heat Treatment on Mechanical Properties of White Cast Iron for Mining Application

 Heat treatment methods were applied to white cast iron for improving the impact and wear resistance. Additionally, chemical composition optimization was made. Furthermore, the effect of boron addition on such applications was investigated. Samples were investigated by using optical and electron microscope methods. Hardness, wear and impact tests were conducted. The results showed that the secondary carbides in the standard alloy were iron-enriched, needle-like carbides M3C when the boron-added alloy contained Fe23(C,B)6 type, globular secondary carbides. It was concluded that heat treatment B provided higher wear and hardness properties, compared to the standard heat treatment. Optimum mechanical properties were obtained by lower destabilisation temperatures and increasing temperature reduced the wear resistance and hardness.